• 동의생리병리학회지
• /
• 제23권1호
• /
• pp.97-103
• /
• 2009

The status and the property of a tongue are the important indicators to diagnose one's health like physiological and clinicopathological changes of inner organs. However, the tongue diagnosis is affected by examination circumstances like a light source, patient's posture, and doctor's condition. To develop an automatic tongue diagnosis system for an objective and standardized diagnosis, classifying tongue coating is inevitable but difficult since the features like color and texture of the tongue coatings and substance have little difference, especially in the neighborhood on the tongue surface. The proposed method has two procedures; the first is to acquire the color table to classify tongue coatings and substance by automatically separating coating regions marked by oriental medical doctors, decomposing the color components of the region into hue, saturation and brightness and obtaining the 2nd order discriminant with statistical data of hue and saturation corresponding to each kind of tongue coatings, and the other is to apply the tongue region in an input image to the color table, resulting in separating the regions of tongue coatings and classifying them automatically. As a result, kinds of tongue coatings and substance were segmented from a face image corresponding to regions marked by oriental medical doctors and the color table for classification took hue and saturation values as inputs and produced the classification of the values into white coating, yellow coating and substance in a digital tongue diagnosis system. The coating regions classified by the proposed method were almost the same to the marked regions. The exactness of classification was 83%, which is the degree of correspondence between what Oriental medical doctors diagnosed and what the proposed method classified. Since the classified regions provide effective information, the proposed method can be used to make an objective and standardized diagnosis and applied to an ubiquitous healthcare system. Therefore, the method will be able to be widely used in Oriental medicine.

• 한국식생활문화학회지
• /
• 제10권4호
• /
• pp.281-289
• /
• 1995

The purpose of this paper is to develop the software for the diagnosis and evaluation of the nutritional ingestion status of inviduals or a group of family members who have inhabited in rural and urban, based on the suggested amount of nutrition and foods. This software can be used for the computation for the needed amount of nutrition, which is suitable to the economic conditions of individuals and group of family members, and for the reduction of effort to plan the balanced table menu and effort to manage the diets. However, those commercial softwares were hard to be purchased and expensive for the users, and even if they were purchased, it needs much time and efforts to operate and run the program. Especially those commerical software were not possible to revise when the user has faced with the need to revise and complement the input data according to his situations such as the individuals and the group of family members. The software which was developed to treat the table menu and the nutrition was very limited to the particular persons. That is, the software was not for the evaluation of the nutrition synthetically and reasonably, because it was planed to use for the patients and the group of hospital and research centers. However this software has a merit of providing the table menu and the nutritional diagnosis in that it can show the suggested amount of nutrition, the evaluation of nutrition, the methods of diet, and management of nutrition individually according to the age, sex, amount of exercise, and experience of sickness. The expected effect can be predicted to calculate the lacking amount of nutrition which the individual has taken, and be provided to the suitable table menu. In addition to this, the various table menu is based on the foods which can be purchased easily and inexpensively at any times.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권4호
• /
• pp.313-320
• /
• 2022

Both angiography and interventional procedures accompanied by angiography provide many diagnostic and therapeutic benefits to patients and are rapidly increasing. However, unlike general radiography or computed tomography using the same X-ray, the amount of radiation is quite high, but the dose range can vary considerably for each patient and operator. The high sensitivity of the lens to radiation during cerebral angiography and neurointervention is already well known, and although there are many related studies, it is insufficient to easily reduce radiation in diagnosis and treatment. In this situation, in particular, by adding three-dimensional rotational angiography (3D-RA) to the existing two-dimensional (2D) angiography, it is now possible to make an accurate diagnosis. However, since this 3D-RA acquires images through projection of more radiation than before, the exposure dose of the lens may be higher. Therefore, we tried to analyze whether the radiation dose of the lens can be reduced by moving the lens out of the field range by adjusting the table height and magnification ratio during the examination using 3D-RA. The surface dose was measured using a rando phantom and a radiophotoluminescent glass dosimeter (PLD) and the radiation dose was compared by adjusting the table height and magnification ratio based on the central point. As a result, it was found that the radiation dose of the lens decreased as the table height increased from the central point, that is, as the lens was out of the field of view. In conclusion, in 3D-RA, moving the table position of about 2 cm in height will make a significant contribution to the dose reduction of the lens, and it was confirmed that adjusting the magnification ratio can also reduce the surface dose of the lens.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.99-111
• /
• 2016

This paper presents an integrated fault diagnosis algorithm for driving motor of In-wheel independent drive electric vehicle. Especially, this paper proposes a method that integrated the high level fault diagnosis and the low level fault diagnosis in order to improve a robustness and performance of the fault diagnosis system. The high level fault diagnosis is performed using the vehicle dynamics analysis and the low level fault diagnosis is carried using the motor system analysis. The validity of the high level fault diagnosis algorithms was verified through $Carsim^{(R)}$ and MATLAB/$Simulink^{(R)}$ cosimulation and the low level fault diagnosis's validity was shown by applying it to a MATLAB/$Simulink^{(R)}$ interior permanent magnet synchronous motor control system. Finally, this paper presents a fault diagnosis strategy by combining the high level fault diagnosis and the low level fault diagnosis.

• 한국컴퓨터정보학회논문지
• /
• 제11권3호
• /
• pp.125-132
• /
• 2006

원자력 발전소에서 비상사태가 발생하는 경우를 대비하여 비상 발전기의 고장진단시스템을 구축할 필요가 있다. 고장진단시스템의 지식베이스를 구현하기 위해서는 클래스와 인과관계 모형을 설계해야 한다. 클래스와 인과관계 모형을 설계하기 위해 먼저 진단대상을 선정하고, 정상과 비정상의 상태정보를 조사하여 시스템의 작동 원리를 외부지식인 개체와 활동으로 추출한다. 추출된 외부지식을 내부지식으로 표현하기 위해 개체를 클래스로 정의하고 활동을 인과관계로 변환한다. 인과관계의 반복적인 설정과 타당성 검토를 통해 지식베이스에 이식할 수 있는 수준의 진단지식을 완성한다. 본 연구는 결정테이블을 통한 설계 모형의 독립성을 고려하였기 때문에 이식성 높은 지식베이스의 구현이 가능하다.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.5-12
• /
• 2016

Purpose: In case of existing building, A lot of attempts are being made like changing thermal system or using high efficiency products to decrease energy load and increase energy efficiency. However, (1) Absence of systemed database of green-remodeling technology and products. (2) Absence of comparative analysis system and qualitative/quantitative evaluation method of energy performance and energy reduction cost. (3) Existing remodeling was very hard to access for non-experts. So, in this paper, the authors developed data base for green-remodeling(Impact Table A, Impact Table B) and optimum combination dedication tool for user convenience. Accordingly, purpose of this paper validate usefulness of Impact Table and optimum alternative dedication tool. Method: For validate the usefulness of Impact Table and optimum combination dedication tool, the authors selected five test model office buildings. Next, through research investigation, the authors diagnosed the present state of buildings. In base of diagnosis results, select technologies for remodeling by qualitative comparison (Impact Table A). Next, evaluate quantitative price and performance technologies that selected in Impact Table A (Impact Table B). Lastly, through final evaluation of Impact Taba A and Impact Table B, determine the direction of the green-remodeling. Result: Impact Table and optimum combination dedication tool can use relative indicator for green-remodeling, especially through ROI by detail field.

• 경영과정보연구
• /
• 제5권
• /
• pp.33-59
• /
• 2000

Problem definition is as important as problem solving in decision making. Decision makers, however, tend to see problem partly or to define it unclearly. The researchers on decision making tend to lay a focus only on the Process of solving the given problem. This dissertation empirically studied the Problem diagnosis and definition in the decision making process. This study developed three kinds of DSS(Decision Support System) for the research and analyzed the effectiveness of the problem diagnosis and definition using DSS developed in this study. The three kinds of DSS are K-T(Kennel and Tregoe) DSS which is a method of table-styled information Presentation, and F-N(Fact-Net) DSS and C-E(Cause and Effect) DSS which are methods of graphic-styled information presentation. The empirical study was conducted twice; the pilot test and the main test. The samples of experiment are 218 students for the pilot test and 259 students for the main test. The author used K-T DSS and F-N DSS for the pilot test, and the revised K-T DSS and C-E DSS for the main test. A questionnaire survey method was included in the main test process The result of the study shows that the group using DSS in problem diagnosis and definition is more effective than the group not using DSS. A table-styled information presentation DSS, K-T, turns out more effective than a graphic-styled information presentation DSS, F-N, K-T DSS and C-E DSS showed no significant differences in the effectiveness in the main test. These results indicate that the use of DSS in the stage of problem diagnosis and definition is very effective and the methods and types of system design are a significant factors for DSS development.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.130-130
• /
• 2000

This paper presents a robust fault diagnosis and fault tolerant control lot the actuator and sensor faults in the closed-loop systems affected by unknown inputs or disturbances. The fault diagnostic scheme is based on the residual set generation by using robust Parity space approach. Residual set is evaluated through the threshold test and then fault is isolated according to the decision logic table. Once the fault diagnosis module indicates which actuator or sensor is faulty, the fault magnitude is estimated by using the disturbance-decoupled optimal state estimation and a new additive control law is added to the nominal one to override the fault effect on the system. Simulation results show that the method has definite fault diagnosis and fault tolerant control ability against actuator and sensor faults.

• 대한의용생체공학회:의공학회지
• /
• 제3권2호
• /
• pp.83-94
• /
• 1982

This paper presents a practical approach to develop computer algorithm for automatic diagnosis electrocardiogram(ECG) based on a decision table techniques.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 춘계학술대회
• /
• pp.13-16
• /
• 1990

This paper describes a software algorithm for automatic diagnosis of arrhythmia using the criteria of Minnesota code manual. This algorithm represents more accurate and more objective information to medical doctor by standardizing the criteria of diagnosis of arrhythmia. Because this algorithm doesn't need complicated mathematic processing, it carries out the real-time automatic diagnosis that is very important in clinic. The Decision-Table technology suggests the proper results for the given conditions. So it expresses the complicated medical problems simply and clearly, those are not solved by the mathematical methods. The Decision-Tables have very simple structure and so it is very easy to correct or expand the system by adding or correcting some rules.