• Korean Journal of Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 1990

Mather type plasma focus system is designed and fabricated, and its electrical behaviors and the ,~haracteristics of the plasma are investigated. The discharge CUlTent is measured with a Rogowski coil, and the external resistance and inductance of the system are found to be $20m\Omega, 0.2{\mu}H respectively from the measured voltage signals and current signals, and discharge inductance, magnetic, and mechanical energy are calculated. 'i'he speed of the plasma current sheath in the acceleration phase is found to vary as $P^{-0.25}\timesV^{0.38}$ and its value is about is 106 cm/sec. The electron temperature in the plasma is determined from the measurement of the X-ray transmittance with the number of X-ray filters and its value is found to be about I keY. The size of plasma, measured using X-ray pin-hole camera, is about 17 (dia.) x 30 (length)mm2. h)mm2.

• Journal of Yeungnam Medical Science
• /
• 제30권1호
• /
• pp.21-24
• /
• 2013

Hemolytic disease in a newborn that causes early jaundice is common. It is often due to the Rh (D) and ABO incompatibility, but rarely due to unexpected antibodies. Among these unexpected antibodies, the anti-$Di^a$Dia antibody rarely occurs. The anti-$Di^a$ antibody was observed in the serum and red-cell eluate of an infant, and in the serum of his mother. The frequency of the appearance of the $Di^a$ antigen in the Korean population is estimated to be 6.4-14.5%. This paper reports a case of hemolytic disease in a newborn associated with the anti-$Di^a$ antibody. A full-term male infant was transferred to the authors' hospital due to hyperbilirubinemia the day after his birth. The laboratory data indicated a hemoglobin value of 11.6 g/dL, a reticulocyte count of 10.6%, a total bilirubin count of 14.4 mg/dL, a direct bilirubin count of 0.6 mg/dL, and a positive result in the direct Coombs' test. Due to the identification of an irregular antibody from the maternal serum, an anti-$Di^a$ antibody was detected, which was also found in the eluate made from the infant's blood. The infant had been treated with phototherapy and intravenous immunoglobulin since the second day after his birth and was discharged due to an improved condition without exchange transfusion. Therefore, in cases of iso-immune hemolytic disease in a newborn within 24 hours from birth who had a negative result in an antibody screening test, the conduct of an anti-$Di^a$ antibody identification test is recommended due to the suspicion of an anti-$Di^a$ antigen, followed by early administration of intravenous immunoglobulin.

• Culinary science and hospitality research
• /
• 제13권2호
• /
• pp.216-222
• /
• 2007

Sometimes the problem occurs that a paper knob and a thread attached to a tea bag fall into tea water in pouring tea water into a conventional cup to extract bag type tea. A new cup was developed to solve that problem, which was formed with a thread groove(dia. ; about $1.5{\sim}2\;mm$, hight ; about $4{\sim}5\;mm$) in the upper end of the cup. As a result, the new cup with a thread groove is expected that a paper knob with a thread does not fall into tea water. In addition, the size of a paper knob and the length of a thread may be reduced 70%, respectively.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.245-253
• /
• 2017

The increasing lack of good quality soils allowing the development of roadway, motorway, or railway networks, as well as large scale industrial facilities, necessitates the use of reinforcement techniques. Their aim is the improvement of the global performance of compressible soils, both in terms of settlement reduction and increase of the load bearing capacity. Among the various available techniques, the improvement of soils by incorporating vertical stiff piles appears to be a particularly appropriate solution, since it is easy to implement and does not require any substitution of significant soft soil volumes. The technique consists in driving a group of regularly spaced piles through a soft soil layer down to an underlying competent substratum. The surface load being thus transferred to this substratum by means of those reinforcing piles, which illustrates the case of a piled embankment. The differential settlements at the base of the embankment between the soft soil and the stiff piles lead to an "arching effect" in the embankment due to shearing mechanisms. This effect, which can be accentuated by the use of large pile caps, allows partial load transfer onto the pile, as well as surface settlement reduction, thus ensuring that the surface structure works properly. A technique for producing rigid piles has been developed to achieve in a single operation a rigid circular pile associated with a cone shaped head reversed on the place of a rigid circular pile. This technique has been used with success in a pile-supported road near Bourgoin-Jallieu (France). In this article, a numerical study based on this real case is proposed to highlight the functioning mode of this new technique in the case of industrial slabs.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• Geophysics and Geophysical Exploration
• /
• 제7권1호
• /
• pp.62-69
• /
• 2004

The objective of this study is to estimate the distribution of a zone disturbed by excavation (EDZ) around tunnels that have been excavated at about 500 m depth in pre-Tertiary hard sedimentary rock. One of the most important tasks is to evaluate changes in the dynamic stability and permeability of the rock around the tunnels, by investigating the properties of the rock after the excavation. We performed resistivity and acoustic tomography using two boreholes, 5 m in length, drilled horizontally from the wall of a tunnel in pre-Tertiary hard conglomerate. By these methods, we detected a low-resistivity and low-velocity zone 1 m in thickness around the wall of the tunnel. The resulting profiles were verified by permeability and evaporation tests performed at the same boreholes. This anomalous zone matched a high-permeability zone caused by open fractures. Next, we performed resistivity monitoring along annular survey lines in a tunnel excavated in pre-Tertiary hard shale by a tunnel-boring machine (TBM). We detected anomalous zones in 2D resistivity profiles surrounding the tunnel. A low-resistivity zone 1 m in thickness was detected around the tunnel when one year had passed after the excavation. However, two years later, the resistivity around the tunnel had increased in a portion, about 30 cm in thickness, of this zone. To investigate this change, we studied the relationship between groundwater flow from the surroundings and evaporation from the wall around the tunnel. These features were verified by the relationship between the resistivity and porosity of rocks obtained by laboratory tests on core samples. Furthermore, the profiles matched well with highly permeable zones detected by permeability and evaporation tests at a horizontal borehole drilled near the survey line. We conclude that the anomalous zones in these profiles indicate the EDZ around the tunnel.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.745-752
• /
• 2024

A method for gamma/neutron event classification based on frequency-domain analysis for mixed radiation environments is proposed. In contrast to the traditional charge comparison method for pulse-shape discrimination, which requires baseline removal and pulse alignment, our method does not need any preprocessing of the digitized data, apart from removing saturated traces in sporadic pile-up scenarios. It also features the identification of neutron events in the detector's full energy range with a single device, from thermal neutrons to fast neutrons, including low-energy pulses, and still provides a superior figure-of-merit for classification. The proposed frequency-domain analysis consists of computing the fast Fourier transform of a triggered trace and integrating it through a simplified version of the transform magnitude components that distinguish the neutron features from those of the gamma photons. Owing to this simplification, the proposed method may be easily ported to a real-time embedded deployment based on Field-Programmable Gate Arrays or Digital Signal Processors. We target an off-the-shelf detector based on a small CLYC (Cs2LiYCl6:Ce) crystal coupled to a silicon photomultiplier with an integrated bias and preamplifier, aiming at lightweight embedded mixed radiation monitors and dosimeter applications.

• International Journal of Highway Engineering
• /
• 제12권4호
• /
• pp.197-202
• /
• 2010

Post release mechanism is generally used to reduce the severity of the occupant of an errant vehicle impacting a roadside posts. The 820kg-50km/h head-on impact simulations were made using LS-DYNA program for the posts of 101.6mm Dia(t=4.0mm) with and without clip-type release mechanism. The simulation result was compared with impact test result to enhance the credibility of simulation model. The study shows that the high impact severity (THIV, PHD) and excessive deformation threatens the safety of the occupant when a car impacts a rigidly connected posts, while a post with clip-type slip base reduce the impact severity to a safe level.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.229-236
• /
• 1992

In an effort to localize the spray-dryer which is markedly used for drying food materials, a experiment was carried out with a wheel type atomizer locally designed and manufactured to evaluate the effect of rotational speed, feed rate and physical properties of liquid food material on the droplet size, and to develop a model to predict the droplet size sprayed at various operational conditions. The result are summarized as follows. 1. The frequency of droplet size sprayed from the atomizer at every treatment were similar to normal distributions. 2. Under the test conditions adopted in this study, that is, rotational speed of the atomizer ranging from 15,000 to 20,000 rpm (55.0 m/sec - 73.3 m/sec), feed rate from 14 to 37 kg/hr and viscosity of the material from 1.14 to 350 cP, the mean volume-surface dia. of droplets was decreased as increase in rotational speed and was not affected significantly by the feed rate and viscosity. 3. Through the dimensional analysis, a prediction model was developed as follows : $$\frac{Dvs}{r}=K[\frac{Q}{{\mu}r}]^a[\frac{rN^2}{g}]^b[\frac{{\rho}^2r^3g}{{\mu}^2}]^c[\frac{L}{r}]^d$$ and it was proved that the above model was better in degree of fitness than other models reported. 4. A prediction equation for the droplet size sprayed from the atomizer under the test was expressed as follows : $$\frac{Dvs}{r}=0.0215[\frac{Q}{{\mu}r}]^{0.06}[\frac{rN^2}{g}]^{0.3314}[\frac{{\mu}^2}{{\rho}^2r^3g}]^{0.0158}$$.

• Clean Technology
• /
• 제3권1호
• /
• pp.96-105
• /
• 1997

The objectives of this study were to investigate $SO_2$ removal efficiency of anthracite - bituminous coal blend combustion in a fludized bed coal combustor with Ca/S, anthracite ratio, bed temperature, and waste paper sludge particle size. The experimental results were presented as follow ; the effect of the desulfurization by the particle size of waste paper sludge was a great and $SO_2$ removal efficiency was heigest in paper sludge dia $1016{\mu}m$. And the difference of $SO_2$ removal efficiency according to air velocity was not too large. As Ca/S mole ratio incresed, $SO_2$ removal efficiency incresed rapidly up to Ca/S mole ratio 3 while the desulfurization rates did not increse too largely in the range of more than the level. The bed temperature had a great deal of effect on the desulfurization rate. So the $SO_2$ removal efficiency was a graet using waste paper sludge that the properbility of paper sludge as sorbent was conformed.