• Title/Summary/Keyword: Dewaxing

Search Result 23, Processing Time 0.023 seconds

Introduction to the recent development of the dewaxing technique. (Dewaxing(탈랍) 기술의 최근의 발전된 기술 내용 소개)

  • 나윤호
    • Journal of the Korean Professional Engineers Association
    • /
    • v.15 no.3
    • /
    • pp.33-36
    • /
    • 1982
  • Dewaxing Technique was reconized as the removal of waxy materials from the lubriating distillates for the purpose of the improvement of the low temperative fluidity of the lubricating oils. Recently this technique is developed not only the removal of the waxy materials but the reformation of the waxy materials which does not effect the low temperative fluidity of the lutricating oils. The cutalytic dewaxing technique is developed is this letter direction. And so I insist here the defintion of dewaxing technique must be defined as the technique of the removal and reforming technique of the waxy materials which effect the fluidity of the lubricating oils.

  • PDF

Effect of Dewaxing Ratio of Beeswax-treated Hanji by Heat and Pressure Method on Aging Behavior of Dewaxed Hanji (가온 가압법에 의한 밀랍도포한지의 탈랍율이 탈랍지의 열화 거동에 미치는 영향)

  • Cho, Byoung-Uk;Choi, Do-Chim;Jo, Byoung-Muk
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.44 no.3
    • /
    • pp.15-21
    • /
    • 2012
  • The optimum dewaxing ratio in dewaxing treatment by the heat and pressure method was investigated by considering aging stability of dewaxed Hanji. Commercial Hanji was coated with beeswax and thermally aged at $150^{\circ}C$ for 24 hours. Then it was dewaxed using the laboratory sheet press equipped with hot plates on both top and bottom sides. Dewaxing ratio was controlled by pressing temperature and time. Four type of dewaxed Hanji samples with different dewaxing ratio were prepared and thermally aged at $150^{\circ}C$. Then the aging stability of dewaxed Hanji samples was evaluated in terms of optical and strength properties. It was found that the aging stability of dewaxed Hanji was superior with higher dewaxing ratio. The result concluded that, in the aspect of aging stability, the coated beeswax in beeswax-treated Hanji shall be completely removed if the coated wax would be dewaxed.

Comparisons of Effectiveness of the Supercritical Fluid Extraction Dewaxing on the Beeswax-Treated Paper with Different Aging Degrees (열화율이 상이한 밀랍지의 초임계유체추출 탈랍처리효과 비교분석)

  • Jeong, Hye Young;Kang, Young Suk;Go, In Hee;Yang, Eun Jeong;Choi, Kyoung Hwa
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.46 no.6
    • /
    • pp.56-62
    • /
    • 2014
  • This study aims to investigate the applicability of supercritical fluid extraction as a dewaxing technique to restore the beeswax-treated volume of the Annals of the Joseon Dynasty in various deterioration and damage conditions. Thus, this study analyzed the dewaxing efficiency and changes in physical and morphological properties before and after dewaxing, by applying the optimal supercritical fluid extraction dewaxing condition ($70^{\circ}C$, 40 MPa, $CO_2$, Co-solvent 20% DCM, 2 hour) to 3 kinds of beeswax-treated paper with different deterioration rates (dry artificial aging of 10, 20 and 30 days at $120^{\circ}C$). After dry artificial aging at $120^{\circ}C$ for 30 days, the average molecular weight of the beeswax-treated specimen was $1.856{\times}10^5g/mol$, showing deterioration about 80% of the beeswax-treated paper before dewaxing. It was a similar level to the molecular weight of the bees-waxed volume of the Annals of the Joseon Dynasty that has a higher degree of damage. As a result of analyzing the dewaxing efficiency through FT-IR analysis, this study discovered that it was possible to effectively dewax beeswax-treated paper in the range of deterioration 20 to 80% with this supercritical fluid extraction dewaxing technique applied. As a result of analyzing changes in the physical and morphological properties before and after dewaxing, the viscosity tended to decrease to a slight degree, and since no morphological deformation or damage of stencil fibers was found, it was concluded possible to conduct stable dewaxing through this supercritical fluid extraction technique.

Evaluation of Dewaxing and Strengthening Treatments for Stabilization of Aged Beeswax-treated Hanji (열화 밀랍지의 탈랍 및 강도보강 처리 안정성 평가)

  • Jeong, Hye Young;Go, In Hee;Nam, Hyun Ju;Choi, Kyoung Hwa
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.45 no.6
    • /
    • pp.10-16
    • /
    • 2013
  • This study aims to carry out the final evaluation on the deterioration stability of dewaxing and strengthening treatments devised to conserve and restore the beeswax-treated volumes of the Annals of the Joseon Dynasty. Thus, this study artificially deteriorated dewaxed Hanji, strengthened Hanji and beeswax-treated Hanji with optimized processing conditions applied, and comparatively analyzed the deterioration characteristics of each kind of Hanji. As a result of this study, it turned out that there was the loss of physical strength and the value of $L^*$ was increased and the values of $a^*$ and $b^*$ were decreased from removing beeswax after dewaxing by supercritical fluid extraction (SFE). Also deteriorated strength during dewaxing was reinforced by strengthening treatment with methylcellulose and it showed higher strength than beeswax-treated Hanji. From the evaluation on deterioration stability after dewaxing and strengthening, it turned out that deterioration stability of strengthened Hanji is the superior. Therefore, it is presumed that conservation of aged beeswax-treated Hanji can be improved and extended when dewaxing and strengthening are applied under optimum conditions.

Optimal Organic Solvent Extraction Method for Dewaxing of Beeswax-treated Hanji (밀랍도포한지의 탈랍을 위한 최적 유기용매 추출기법 탐색)

  • Choi, Do-Chim;Choi, Eun-Yeon;Jo, Byoung-Muk;Cho, Byoung-Uk
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.44 no.6
    • /
    • pp.50-57
    • /
    • 2012
  • In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

Effect of Soxhlet Extraction Condition on Dewaxing Efficiency of the Beeswax-Treated Paper (속실렛 추출법에 의한 밀랍지의 탈랍처리 효과분석)

  • Choi, Kyoung-Hwa;Jang, Hye-Mi
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.45 no.5
    • /
    • pp.64-70
    • /
    • 2013
  • In this study, the effect of soxhlet extraction on dewaxing of the aged beeswax-treated paper was examined. To do this, soxhlet extraction of the aged beeswax-treated paper performed with different reflux conditions and then measured the dewaxing efficiency and change in the various properties such as tensile strength, folding endurance, color and brightness. Also, an artificial aging test was executed in order to investigate the effect of soxhlet extraction on the preservability of the dewaxed paper. As the result of FT-IR analysis, a peak area of CH and COOH group, which are main band of beeswax, was decreased or removed after soxhlet extraction. The decreasing rate of each peaks were increased depending on reflux time. After dewaxing, the physical property such as MIT type folding endurance and tensile strength was decreased. And $L^*$ value and brightness were increased while $a^*$ and $b^*$ value were decreased due to the remove of color compounds in beeswax. The more color deviation (${\Delta}E$) is expected with higher reflux times. As the result of artificial aging, preservability of two dewaxed papers except of DP_SE(C) sample was higher than that of untreated paper i.e. beeswax-treated paper.

Dewaxing of Sunflower Seed Oil (해바라기 유(油)의 탈납)

  • Rhee, Joon-Shick
    • Korean Journal of Food Science and Technology
    • /
    • v.11 no.2
    • /
    • pp.112-117
    • /
    • 1979
  • By using the existing caustic refining system with a minimum modification and by using a combination of various emulsifiers(0.2 % sodium hexametaphosphate. 0.05 % sodium lauryl sulfate and 0.001 % dioctyl sodium sulfosuccinate), a new economical dewaxing process for sunflower seed oil was developed in order to reduce the cost of the dewaxing process. The results indicate that the waxes can be removed satisfactorily from the sunflower seed oil by emulsifying. batchwise or continuously, the oil with the aqueous surfactant solution, followed by centrifugation at ambient temperatures $(16{\sim}27^{\circ}C)$. Dewaxing loss for the batch process was satisfactory for both low wax-and high wax-crude oil, whereas dewaxing loss for the continuous process needs to be improved. The results indicate that initial level of wax content (low wax vs. high wax) did not affect the loss for batch process (0.82 % vs. 0.62 %), but affected the loss for continuous processes, regardless of the type of mixing mode (2.28 % and 5.68 % for low wax-and high wax-oil, respectively). It was also noted that the type of mixing mode (centactor vs. static mixer) for the continuous process affected the loss, regardless of the wax content (5.2 % and 2.8 % for contactor and static mixer, respectively).

  • PDF

Properties of Bunker-C Residual Oil (번커-C 重油의 性狀)

  • Hong Sung Taik
    • Journal of the Korean Chemical Society
    • /
    • v.11 no.1
    • /
    • pp.17-21
    • /
    • 1967
  • For utilization of Bunker-C residual oil produced at KOCO., the auther tested the properties of vacuum fraction and blown asphalt, and as the result of it, (1) Vacuum fraction had so broad range of viscosity and high flash point that could be produced all kind of lublicating oil, but had to be dewaxed for high pour point, (2) Urea dewaxing was suitable to lighter fraction but not to heavier fraction, so, for heavier fraction, solvent dewaxing was needed. (3) Blown asphalt produced from vacuum residue had uniform relation between softening point and penetration in spite of broad change of blowing condition and adding of catalyst.

  • PDF

Evaluation of the Beeswax Applying and Dewaxing Technique of Hanji, and Their Ageing Behaviors (한지의 밀랍 및 탈랍처리 기법과 열화거동 평가)

  • Kang, Kwang-Ho;Lee, Geum-Ja;Kim, Hyoung-Jin
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.42 no.3
    • /
    • pp.58-66
    • /
    • 2010
  • The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.