• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.500-504
• /
• 2017

In this paper, we developed a temperature measurement system based on an infrared temperature imaging module for thermal safety verification of a plasma skin treatment device (PSTD). We tested a pilot product of the low-temperature PSTD using the system, and the temperature increase of each plasma torch was well-monitored in real-time. Additionally, through the approximation of the temperature increase of the plasma torches, a certain limitation of the plasma treatment time on skin was established with the International Electrotechnical Commission (IEC) guideline. We determined an appropriate plasma treatment time ($T_{Safe}$ < 24 minutes) using the configured temperature measurement system. We believe that the temperature measurement system has a potential to be employed for testing thermal safety and suitability of various medical devices and industrial instruments.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.854-859
• /
• 2006

This study aims to evaluate the effect on indoor environment by the application of the shading device on winter season. Therefore, thermal and visual experiments were conducted at two side-by-side mock-Lip test cells which were equipped with the shading device(venetian blind & roll blind) at interior and exterior side of the window. The results of this study are as follows: 1) At night of winter, the shading device can prevent internal heat from going out. 2) Exterior shading device is more effective in winter as well as in summer. 3) At daytime of winter, the shading device can provide the uniformity of illuminance, and the interior shading device is more effective.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1213-1215
• /
• 2007

The OTFT technologies have been mature almost up to the level of commercialization. In this paper we report the OTFT's applications to the backplane for active matrix electrophoretic, active matrix OLED and to integrated circuits. In addition we also introduce the recently developed technologies for reduction of OTFT's operating voltage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.121.6-121
• /
• 2002

Web-based virtual machine/manufacturing system (VMS) utilizes Virtual Device Network (VDN.) VDN inevitably involves the implementation of Distributed Monitoring and Control Networks (DMCN). In general, one needs to integrate device (control) network and IP network to realize DMCN over IP network or internet, which can be viewed as a VDN. In this study, LonWorks networking technology is used for device network and the transmission characteristics of LonWorks/IP-based VDN is investigated. A method to minimize the transmission delay in the LonWorks/IP networks is also suggested.

• 기본간호학회지
• /
• 제7권3호
• /
• pp.391-400
• /
• 2000

A long-term bed rest results in an inevitable foot drop. Yet preventive device such as a foot board and high-neck tennis shoes, are not widely used. This study was conducted to compare the effects of a pillow-type foot board with that of the band-type device. The band-type device of a resonable price is designed for an effective prevention of foot drop, and the convenience for it use. Among the non-equivalent control group design, foot drop preventive effects, usefulness of the device, as well as its cost effectiveness were examined. The study was carried out for four months from December 1999, and its subject had been patients and nurses of two intensive care units at K medical center in Seoul. According to the study purpose, the data collected were analyzed by $x^2-test$ and t-test. The results are as follow : 1. The ROM of ankle joint is promoted in the experimental group with a band-type device comparing the control group with a pillow type one. Dorsiflexion is particularly increased in the experimental group as compared with the control group, while planterflexion hardly shows any change. 2. The usefulness score of the experimental group nurses using the band-type device (23.97) is higher than that of the control group nurses (18.88). 3. In an aspect of the unit production cost, band-type devices are low-priced compare with pillow-type or other foot board (wooden) or high-neck tennis shoes. In summary, the newly developed band-type device is both useful and preventive for a foot drop. It is also desirable regarding to the production cost and the cost effectiveness. This fact proves that the new anti-foot drop device could be practical both for clinical care and home care. Yet the results were obtained by some subjects, it should be used after a further examination. More effective nursing intervention could be observed throughout general studies, including proper positioning and foot and ankle exercises which are the important variables of the foot drop prevention.

• 재활복지공학회논문지
• /
• 제11권1호
• /
• pp.63-71
• /
• 2017

본 논문에서는 달팽이관의 정원창 이식용으로 최근 새롭게 제안된 3코일 벨로우즈형 진동체(tri-coil bellows transducer, TCBT)를 이용하는 반이식형 인공중이(semi-implantable middle ear hearing device)를 위한 신호처리회로를 설계하였다. 설계된 반이식형 인공중이는 높은 효율을 가지는 유도결합 방법을 이용하여 귀 뒤편에 착용되는 체외기와 대응되는 피부 내측에 위치하는 체내기 간에 데이터를 전송한다. 귀 뒤 부위의 피부두께를 포함하는 반이식형 인공중이의 송수신 거리를 고려하여 송수신 코일과 신호처리 회로를 설계 및 구현하였다. 또한 데이터 전송 효율을 높이기 위하여, 전력을 충분히 증폭하기 위한 체외기의 출력부도 설계 하였다. 유도결합 방식을 이용한 반이식형 인공중이의 동작을 확인하기 위하여, PSpice를 이용하여 회로해석을 수행하였으며, 활용 가능한 크기의 신호처리 보드를 제작하여 그 성능을 검증하였다.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.65-71
• /
• 2016

Purpose : The solar shading device carries out roles in a reduction of the cooling load and an improvement of the thermal comfort of occupants by adjusting incident solar radiation. In addition, The shading device enhances the visual sensation comfort by controlling the optical properties. In order to improve building performance and comfort of occupancy, interests in application of the shading devices are getting increasing. This study investigated the application and effectiveness of the external shading device design using statistical analysis. The outcome of this paper could be utilized for the realization of status quo and for an estimation of effectiveness of the shading device Method : The period of data gathering was between 2003 and 2014 and total 459 cases of practical building project were investigated. Firstly, this study defined qualification of the shading devices; the shading device should have minimum protruding lengths of 150mm to outside and have the function of shading control. This paper investigated application rate of the shading device in real project, regional rate of application, annual change of application, materials and types. Result : The statistical analysis showed that the application rate of shading devices was 25.7% in total 459 building design projects. The application rate in central and southern region was 25.3% and 27.0% respectively. Meanwhile, Jeju region showed 22.2%, which was the lowest rate although this area needs more shading devices. The application number of the shading device was the smallest in 2007, but the rate gradually increased after that. The applications was the largest in 2014 due to growing interest of the shading devices in the building.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.652-660
• /
• 2008

어플리케이션에 맞춤화 된 다양한 임베디드 시스템은 리소스의 효율적인 관리를 위해 임베디드 OS의 종류와 버전에 맞는 디바이스 드라이버가 요구된다. 본 논문에서는 동일한 OS의 새로운 버전에 대해 확장성이 용이한 디바이스 드라이버 자동생성 시스템을 제시한다. 제안한 시스템에서는 특정 OS 고유의 디바이스 드라이버 구조를 템플릿으로 작성한 후 라이브러리화하며, 라이브러리에 저장된 템플릿을 기본골격으로 하여 시스템의 특성에 따른 코드를 추가하는 방법으로 디바이스 드라이버를 생성한다. 생성된 디바이스 드라이버를 커널에 등록하여 데이터 전송 시간을 비교한 결과 매뉴얼로 설계한 디바이스 드라이버에 비해 자동생성된 TFT-LCD 드라이버, USB 인터페이스 키보드 마우스 드라이버, 그리고 AC'97 컨트롤러 드라이버가 각각 경미한 증가를 보였다. 생성된 드라이버를 커널 컴파일 한 후의 코드 사이즈도 각각 경미한 증가를 보였다.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.135-140
• /
• 2005

Vegetable transplanting operation has been wholly depended on human labor that needs 18.4 hrs per 10 acres in Korea. Since periods of vegetable transplanting operations are limited, their mechanization has been strongly demanded. This study was conducted to develop a transplanting device that was the core technology for vegetable transplanter. In order to find out transplanting track and velocity of transplanting device, a kinematic analysis software was employed. Evaluation of prototype was carried out in the circular soil bin with high speed camera. Rotary type transplanting device produced an elliptic loci when two links of different lengths were moving to the opposite direction. The length of two links was 75mm and 44mm, respectively. Maximum displacement of rotary type transplanting device was 238mm. It seemed that the transplanting elliptic loci of transplanting device were identical between the simulation output generated by kinematic analysis software and the circular soil bin test result with a high speed camera. The rotary type transplanting device can be suitable fur transplanting short height vegetable, less than 20 cm length vegetables such as Chinese cabbage and cabbage, etc.

• Journal of Acupuncture Research
• /
• 제32권4호
• /
• pp.91-102
• /
• 2015

Objectives : The Oriental medical device industry is expected to continue to experience significant growth. It should increase its global market share rather than focusing on the domestic market. Countries around the world self-regulate their domestic market, so this study aims to aid in the development of a particular overseas market by introducing the U.S.(the largest market) medical device registration and approval process. Methods : For an understanding of the US medical device licensing process, we researched the relevant regulatory organization (FDA), the history, definition and classification of medical devices, the approval and 510(k) submission process related to substantial equivalence, IEC 60601-1 Edition 3, usability tests, and so on. Results : Medical devices in the United States are assigned to one of three regulatory classes: Class I, Class II and Class III, based on the level of control necessary to assure the safety and effectiveness of the device. If a company's device is classified as Class II and if it is not exempt, a 510k will be required for marketing. 1) A 510(k) is a premarket submission made to the FDA to demonstrate that the new device to be marketed is "substantially equivalent" to a legally marketed device (predicate device) 2) The IEC 60601-1 Edition 3 preparation process, which contains information related to usability, is expensive and time-consuming but a critical requirement. Conclusions : Although the U.S. market has high barriers to entry, access to this, large overseas market will encourage development of the Oriental medical device industry and commercial value enhancement is expected.