• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.17-24
• /
• 2017

As the prevalence of removable device, critical intelligences are often stored in the removable device. For that reason, in seizure and search, the removable device became a important evidence of while it could be has a salient key for prove a crime. When we acquired a removable device for proof, we image it by a imaging device or software with a write protection. However, these are high-priced exclusive equipments and sometimes it could be out of order. In addition, we found that some secure USB and inbuilt vaccine USB are failed to connect to the imaging device. Therefore, in this paper, we provide a suitable digital evidence collection procedure for real.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.464-470
• /
• 2013

These days, with increasing interest about the health care, research about standard for transmitting/receiving data of health device has been actively conducted. Standardization and testing / certification is underway through the IEEE 11073 PHD, Health Level Seven and the Continua Health Alliance, it'll continue to be more research and experiments in the future. In this paper, we introduce the IEEE 11073 PHD standards for exchange of remote health information and the Bluetooth Health Device Profile(HDP) for health device profile of the Bluetooth technology, also we conducted experiments about exchange health information between health device and smart device which are adapted the IEEE 11073 PHD and Bluetooth HDP. Transmitting/receiving of the IEEE 11073 PHD standard protocol using the Bluetooth HDP profile between health device and smart device can be known by this experiment, and it expect to implement variety of remote medical services through health device supporting these standards in future.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.498-508
• /
• 2008

TECA(Terminal Cabin) has train information, fault display, maintenance function and training function for driver, as sub-device of Seoul-Pusan Express train's on-board computerized device. Concerning KTX train's driving, signal driving is required for high speed driving, and it is true that we have difficulty in troubleshooting and acquisition of basic information through long train and one-man driving. Therefore, rapid and correct processing about various information and TECA device for maintenance are indispensable for its utilization. But there is not study example in hardware, maintenance about this device and device development according to new requirements. Therefore, this study will help understanding of driver assistance terminal device's maintenance performance development, describing TECA's basic functions necessary for device development and its requirements. Accordingly, I suppose that this thesis will be utilized to complete specification, necessary for new driver assistance terminal device development.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.545-552
• /
• 2008

To insure the quality and safety of ground anchors, pull-out test of anchor has to be done. In the individually controlled pull-out test system, pull-out device is used to introduce the same pull-out force to individual tendon that has a different length and a deflection. That is, that device has a separate pull-out oil jack to each tendon, thus the pull-out length of each jack is not the same, but that device introduces each tendon to the same pull-out force. In this study, the in-situ pull-out tests for the compression anchors were performed and its test results were analysed and compared to the results of center hole pull-out tests. In the case of pulling out each tendon using the individually controlled pull-out test device, the pull-out forces were distributed to a individual tendon. That device is excellent one that can solve the cause of unequal pull-out forces of each tendon appearing in the manufacture process and construction of anchors, and unequal pull-out forces due to the deferent length.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.27-46
• /
• 2009

Korean society frenzy about ubiquitous computing is in a rapid change into so called 'Nomadic' information environment. In many previous studies, a number of intrinsic and extrinsic motivation factors were empirically found to affect users' continuance to use mobile hand-held devices. However, the role of device attachment, a new intrinsic motivation factor with which users are known to care about their own mobile devices personally, in determining users' post-adoption behavior was not explored yet to the full scale. To fill the research void like this, this study proposes a new research model in which device attachment as well as perceived value are positively linked to satisfaction and continuance to use. The statistical results obtained by applying PLS to the valid 137 questionnaires showed that the device attachment has stronger positive influence on satisfaction and continuance to use than the perceived value. Therefore, a practical implication is suggested thai the mobile devices need 10 be designed in a way of arousing users' device attachment more strongly.

• Rapid Communication in Photoscience
• /
• v.3 no.1
• /
• pp.16-19
• /
• 2014

Anodic self-organized titania nanotube (TNT) arrays have a great potential as efficient electron-transport materials for dye-sensitized solar cells (DSSC). Herewith we report the photovoltaic and kinetic investigations for a series of heteroleptic ruthenium complexes (RD16-RD18) sensitized on TNT films for DSSC applications. We found that the RD16 device had an enhanced short-circuit current density ($J_{SC}/mAcm^{-2}=15.0$) and an efficiency of power conversion (${\eta}=7.2%$) greater than that of a N719 device (${\eta}=7.1%$) due to the increasing light-harvesting and the broadened spectral features with thiophene-based ligands. However, the device made of RD17 (adding one more hexyl chain) showed smaller $J_{SC}(14.1mAcm^{-2})$ and poorer ${\eta}(6.8%)$ compare to those of RD16 due to smaller amount of dye-loading and less efficient electron injection for the RD17 device than for the RD16 device. For the RD18 dye (adding one more thiophene unit and one more hexyl chain), we found that the device showed even lower $J_{SC}(13.2mAcm^{-2}) $ that led to a poorest device performance (${\eta}=6.2%$) for the RD18 device. These results are against to those obtained from the same dyes sensitized on $TiO_2$ nanoparticle films and they can be rationalized according to the electron transport kinetics measured using the methods of charge extraction and transient photovoltage decays.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.51-59
• /
• 2013

The smart device is a personal device and has the ability to use built-in sensors. Therefore, it is possible to provide individually customized services through recognizing the user's context from the sensor information. For these customized services, the user's moving status is the important information that can be utilized in many areas. Because the existing researches on determining the user's moving status assume that the user has a smart device in his/her pocket or bag, if the user is using his/her smart device it is not suitable for exactly distinguishing the user's moving status. In order to solve this problem, this paper proposes an algorithm to determine the user's using and moving status. Our proposed algorithm utilizes smart device's events to distinguish the smart device usage and the accelerometer sensor data to determine the user's movement. As an analyzing result through the real experiment, the accuracy of our algorithm is about 75 percent on average.

• Journal of Digital Contents Society
• /
• v.11 no.4
• /
• pp.529-536
• /
• 2010

Currently many people are awfully concerned about smart device in domestic and foreign mobile market. The need of smart device has been rapidly increased. Unlike a feature phone smart devices provide us with an intuitive interface which is easy to control. They are enable to smoothly interact between user and device. Though higher market outlook, there is a lack of empirical research on user interface in touch screen based on smart device. In this paper, we propose the touch interface conceptual model concentrating on user based on the result of previous research. Materials of this research are three kinds of smart devices which are currently released. Through expert's depth interview and observation of user, user's cognitive actions in smart device are defined. Since the method of the touch interface which is suitable for the action has been derived, we have proposed the conceptual model of user's cognitive action. This research imply to offer the excellent design guideline in order to implement touch interface to optimize user experience in touch screen based on smart device to release in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.371-380
• /
• 2013

D2D (Device-to-Device) communication on an underlying cellular infrastructure which exploits the same spectrum has several advantages such as increased resource utilization and improved cellular coverage. However, D2D communication system needs to cope with ICI (Inter-Cell Interference) and interference between cellular and D2D links. As a result, macro UEs (User Equipments), especially those located near cell edge, will suffer from serious link performance degradation. We propose a novel interference avoidance mechanism assisted by SRN (Shared Relay Node) in this paper. SRN not only performs data re-transmission as a usual Type II relay but also has several features newly defined to avoid interference between cellular and D2D links. In particular, we suggest resource allocation methods based on the SRN for effective interference avoidance, and evaluate their performance through computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1500-1506
• /
• 2020

In this paper, we study a scheduling problem based on reinforcement learning for overlay device-to-device (D2D) communication networks. Even though various technologies for D2D communication networks using Q-learning, which is one of reinforcement learning models, have been studied, Q-learning causes a tremendous complexity as the number of states and actions increases. In order to solve this problem, D2D communication technologies based on Deep Q Network (DQN) have been studied. In this paper, we thus design a DQN model by considering the characteristics of wireless communication systems, and propose a distributed scheduling scheme based on the DQN model that can reduce feedback and signaling overhead. The proposed model trains all parameters in a centralized manner, and transfers the final trained parameters to all mobiles. All mobiles individually determine their actions by using the transferred parameters. We analyze the performance of the proposed scheme by computer simulation and compare it with optimal scheme, opportunistic selection scheme and full transmission scheme.