• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.137-140
• /
• 2005

The electronic dispenser is composed of electronic part and mechanical part. Electronic part is consisted of input keypad, micro-controller, display module, and pump module. In this paper we designed micro-controller for electronic part. The micro-controller controls display module and pump module. The display module is composed by LCD device, and the pump module is composed by motor device. The micro-controller for an electronic dispenser is designed by VHDL. We used WX12864APl for the LCD device and SPS20 for the stepping motor. Also, the micro-controller is designed by Altera Quartus tool and verified with Agent 2000 Design-kit using APEX20K Device. In this paper, we present possibility to adopt of biotechnology field through designing of one-chip controller for an electronic dispenser.

• 한국컴퓨터정보학회논문지
• /
• 제8권3호
• /
• pp.163-169
• /
• 2003

본 연구에서 개발하고자 하는 기기의 모델은 마이크로 컨트롤을 이용하여 모터속도를 제어 할 수 있는 출력 전자 변속기로써, 자동제어 방식을 사용하여 Switching frequency를 1,000MHz까지 가능한 형태로 변환하는 자동 변속장치이다. 연속출력전류는 5A, 11A, 18A, 25A, 35A, 50A이며, 사용되는 전압은 9V에서 최대 18V까지 가능하도록 설계하였다. Micro-controller 의 software와 hardware의 블록 다아이그램을 고안하였으며, 전력손실을 막기 위해 자동적으로 3.7V에서 Auto Cut-Off기능이 있도록 구성하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.36.4-36
• /
• 2002

$\textbullet$ A FPGA-based One-chip position controller with the PCI interface was developed. $\textbullet$ The peripherals of the existent controller can be implemented in one FPGA device. $\textbullet$ For this purpose, the high capacity FPGA device was used. $\textbullet$ PCI controller was merged into the position controller by using the PCI controller of core form. $\textbullet$ The developed position controller used only one FPGA device to achieve the required function. $\textbullet$ By doing this, the overall system can be simplified. $\textbullet$ The noise and power dissipation problems can be minimized and it has the advantage in the price.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.61-65
• /
• 2000

In this paper We have developed the high-speed controller for haptic control. The proposed controller is based on the PCI/FPGA technology which can calculate the real position and transmit the force data to device rapidly. The haptic system is composed of 6DOF force display device high-speed controller. The developed system will be used on constructing the dynamical virtual environment. To show the efficiency of our system we designed simulation program of force-reflecting. As the result of the experiment we found that the controller has much higher resolution than some other controller It is so efficient in a 1 PC-based system with 1[kHz] haptic interrupt cycle.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2397-2401
• /
• 2005

It is well understood that force reflecting coupled with visual display can be an important two-way communication channel in human-computer interaction. In this work, important components for a high-fidelity system bandwidth are force reflecting device and that all the computations including contact determination and response computation have to be performed in less than a millisecond. This paper describes a force-reflecting device and an embedded controller. The realized force-reflecting device is based on a novel serial type mechanical structure, and features compactness, high sustained output force capability, low friction, zero backlash, and enough workspace. The embedded controller reduces software computational load via main processor and simplifies hardware strictures by the time-division control. The device is integrated with existing dynamic simulation algorithms running separate workstation, so that objects can be manipulated in real time and the corresponding forces felt back by the operator.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.101-107
• /
• 2005

본 논문에서는 전자 디스펜서(dispenser)용 제어기를 단일 칩으로 설계하였다. 전자 디스펜서는 전자부분과 기계부분으로 구성되며, 전자부분은 이력 키패드, 제어기, 디스플레이 모듈과 펌프모듈로 구성된다. 본 논문에서 설계한 제어기는 LCD 소자와 모터 펌프를 제어하며 VHDL을 이용하여 설계하였다. LCD 소자로서 WX12864AP1을 사용하였으며, 스테핑 모터로는 SPS20을 사용하였다. 이 제어기는 Altera사의 Quartus 툴을 사용하여 설계 후, Agent 2000 설계 키트와 APEX20K 소자를 사용하여 LCD 모듈과 모터모듈에 연결하여 동작 검증함으로, 동작이 원활히 이루어짐을 확인하였다. 본 논문에서는 전자 디스펜서의 제어기 설계를 통해 전자 디스펜서의 전용 칩을 ASIC으로 구현하여 바이오기술 분야의 기기에 적용할 수 있는 가능성을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.33-35
• /
• 2000

We propose a intelligent controller for FACTS(Flexible AC Transmission System) device to stabilize a power system. In order to identify the nonlinear characteristics of the power system and to estimate a control signal, an artificial neural network is utilized. The control signal which is provided for FACTS device installed in the network is produced. The proposed controller is applied to Unified Power Flow Controller(UPFC) to verified the effectiveness of the proposed control system. The results show that the proposed nonlinear FACTS controller is able to enhance the transient stability of three machine nine bus power system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.285-288
• /
• 1998

In this paper, we present mSROS(Micro-Scalable Realtime Operating System) to be applied commonly to the device controller systems in the HANbit ACE256 system. The device controller systems in HANbit ACE256 system are organized as many kinds of device controller. Applying modified PPOS(Peripheral Processor Operating System)which is an operating system for devices of the TDX-10 switching system to the firmwares for them, the inefficiency in development and maintenance exists inherently. To remove the inefficiency nd to improve the performqance of firmwares, we build a common operating system platform that including multi-tasking microkernel so that the firmwares among devices can acquire convenient development and cheap cost of maintencance. Especially, building a virtual machine as a development methodology, it is possible to remove dependency from the kernel so that any kinds of commercial real-time kernels can be used in mSROS as a basic kernel. The virtual machine in mSROS is compatible with the API of SROS(Scalable Realtime Operating System), PPOS, and CROS(Concurrent Realtime Operating System).

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.209-212
• /
• 2000

본 논문에서는 AGV(Automatic Guided Vehicle)를 제어하기 위한 hard-wired 제어기를 설계하였고, CPLD(Complex Programmable Logic Device)를 이용하여 구현하였다. 제안된 제어기는 자율주행을 위한 유도장치 제어기, 모터 제어장치, 입출력 sequence 제어기 등을 포함하고 있다. 마이크로프로세서에 의해 구현된 기존방식에 비해 hard-wired 제어방식을 사용하므로 복잡한 프로그램 과정을 줄일 수 있다. 또한 메모리, 조합논리, 순서논리 회로를 쉽게 추가할 수 있어 제품의 개발시간 단축, 제품 크기 축소, 난이도 등에서 발생되는 총 제작비용 등을 감소시킬 수 있다. 제어기는 VHDL을 이용하여 동작적 기술 방법으로 설계되었으며, Altera사의 MAX＋Plus II를 사용하여 합성하였고, EPF10K10LC84-4 디바이스로 구현하여 AGY 모형(Line-tracer)에 적용시켜 동작을 확인하였다.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.95-102
• /
• 2008

Since the processes of dismantling are very dangerous, there have been many studies to develop remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling equipment that is usually an excavator, a novel concept of tole-operated device is proposed. Operators who use this device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the remote controller, its workspace is analyzed and the workspace mapping from the device to the excavator is explored. Second, after 7 steps of the excavating processes are defined, the kinematics which deals with the conversion from the 3 dimensional position information of the device to the joint variable information of the backhoe is included in this paper. Lastly, 3D graphical simulation of both remote controller and the backhoe will be shown. This new design of the remote control device tan be easily manufactured and gives the workers very convenient and transparent remote control capability.