• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.262-267
• /
• 2008

The long-term wind data are reconstructed from the short-term meteorological data to design the 4 MW offshore wind park which will be constructed at Woljeong-ri, Jeju island, Korea. Using two MCP (Measure-Correlate-Predict) models, the relative deviation of wind speed and direction from two neighboring reference weather stations can be regressed at each azimuth sector. The validation of the present method is checked about linear and matrix MCP models for the sets of measured data, and the characteristic wind turbulence is estimated from the ninety-percent percentile of standard deviation in the probability distribution. Using the Gumbel's model, the extreme wind speed of fifty-year return period is predicted by the reconstructed long-term data. The predicted results of this analysis concerning turbulence intensity and extreme wind speed are used for the calculation of fatigue life and extreme load in the design procedure of wind turbine structures at offshore wind farms.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.309-320
• /
• 2000

Aperture is an important parameter for determining the hydraulic characteristics of fractured media. In this study the topography of artificial rock joint surface was measured using 3D laser profilometer to analyze the aperture distribution. The initial aperture distribution was determined when the contact area became one percent of total joint surface. The initial aperture distribution of granite joint, with the mean value of 0.78 mm and the standard deviation of 0.34 mm was much different from that of the marble joint, with the mean value of 0.57 mm and the standard deviation of 0.26 mm. Apertures of both granite and marble showed normal distributions. Aperture distribution with the contact area of 25% was also analyzed. Mean value was decreased to one third compared to the initial aperture, but the standard deviation was decreased slightly. To determine the spatial correlation of the aperture distribution variogram analysis was carried out on the initial aperture data. Most experimental variograms were fitted well with exponential model. It is expected that the measured aperture characteristics can be used for stochastic analysis of fluid flow through rock joints.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.151-152
• /
• 2016

This paper presents a neutral point deviation compensating control algorithm applied to a 3-level NPC converter under generalized unbalanced ac input conditions. The neutral point deviation is analyzed with a focus on the current flowing out of or into the neutral point of the dc-link in 3-level NPC converter. The model of neutral point deviation and neutral current are also constructed. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converter and its impact on neutral point deviation. This paper includes the harmonic characteristic of neutral point current under various imbalance AC operating conditions.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.5
• /
• pp.263-270
• /
• 2003

In field applications, to represent the degree of voltage unbalance, the maximum voltage deviation from the average is preferred to the voltage unbalance factor based on symmetrical component analysis. This paper first clarifies the relationship between the voltage unbalance factor and the maximum deviation factor showing that the maximum deviation factor approximates the voltage unbalance factor under relatively low unbalanced conditions. Several alternative ways of approximation are introduced and examined by comparing with the conventional maximum deviation factor. It appears that these alternatives provide more accurate approximation to the voltage unbalance factor over wider range of voltage unbalance while maintaining simplicity in their formula.

• Speech Sciences
• /
• v.10 no.4
• /
• pp.81-91
• /
• 2003

The aim of this study was to estimate the target F2 values of the coronal plain stop in Korean and the degree of deviation from the target in the context of various vowels, and to compare the results of Korean regarding the coronal stop with those of English and French. An acoustic analysis showed that the mean F2 value of the Korean coronal stop produced by 10 male speakers was 1,855 Hz and the deviation from the target was 94 Hz in the context of [i], 204 Hz in the context of [u], and 407 Hz in the context of [o]. The target F2s of the coronal stop were the highest in English (1,929 Hz) and the lowest in French (1,662 Hz), and the deviation from the targets in the context of the high back vowel was the largest in French (257 Hz) and the smallest in English (73 Hz).

• Journal of East Asia Management
• /
• v.4 no.1
• /
• pp.79-98
• /
• 2023

This study investigates the relationship between firm's cost behavior and the managerial strategic deviation. Firms which intend to reduce uncertainty and improve viability for future performance tend to implement managerial strategies similar to peer firms in the same industry. Since the managerial decisions affect firm's cost behavior, the strategic deviation including operations different from others would be associated with cost behavior distinct from peer firms. On firms listed on Korean Security Exchange and KOSDAQ markets from 2002 to 2017, the analysis show the results that the firm's strategic deviation is positively associated with cost-downward rigidity, indicating that the management strategy affects the cost behavior. Also, it means that corporate managers who choose a strategy that deviates from peer firms are less likely to adjust their resource even when sales decrease. This study is meaningful in expanding the literature on the determinants of cost behavior by analyzing the effect of the management strategy's characteristics of strategic deviation on cost behavior.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.546-553
• /
• 2008

Purpose: The purpose of this study was to estimate validity of posterior anterior cephalometric and 3D-CT for orbital canting analysis. Materials and methods: Three trained observers classified two patients group using standardized frontal photographs of facial asymmetry patients. Group A consisted of patients with facial asymmetry and orbital canting(n=19), and group B consisted of patients with only facial asymmetry(n=43). Orbital canting was measured with line of bilateral inferior orbitale. Orbital canting measurement was done with posterior anterior cephalometric and 3D-CT. Each horizontal reference line was established by bilateral GWSO(cephalometric), FZS(3D-CT). Maxillary canting and mandibular deviation angle were also measured and analyzed with orbital canting. Results: The mean orbital canting was $3.03{\pm}1.00^{\circ}$ in Group A and $1.11{\pm}0.76^{\circ}$ in Group B in frontal photograph. The mean orbital canting was $1.20{\pm}0.74^{\circ}$ in group A and $1.22{\pm}0.65^{\circ}$ in group B by cephalometric analysis(p>0.05). In 3D-CT, orbital canting was almost paralleled with horizontal reference line. The orbital canting, maxillay canting and mandibular deviation between two groups showed no significant differences except madibular deviation in 3D-CT. Conclusion: Common analysis of posterior anterior cephalometric and 3D-CT is not valide method to evaluate orbital canting for facial asymmetry patients with orbital canting.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.13-13
• /
• 1998

A simple model of the tip leakage flow models of the rotor downstream flow is developed, based on Lakshminarayana's theoretical concept on the tip clearance flow and the experimental data published in open literature. And new spanwise distribution models of deviation angle and pressure loss coefficient due to the tip leakage flow are formulated for use in association with the streamline curvature method as a through flow analysis. Combining these new models and previous deviation and loss models due to secondary flow, a robust streamline curvature method is established for flow analysis of single-stage, subsonic axial turbines with wide ranges of turning angle, aspect ratio and blading type. At the exit from rotor rows, the flow variables are mixed radially according to a spanwise transport equation. The proposed streamline curvature method is tested against a forced vortex type turbine as well as a free vortex type one. The results show that the spanwise variations of flow angle, axial velocity and loss coefficients at rotor exit are predicted with good accuracy, being comparable to a steady three-dimensional Navier-Stokes analysis. This simple and fast flow analysis is found to be very useful for the turbine design at the initial design phase.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2008

1. Objectives The Body Shape and Feature is one of the important standard for classification of Sasang Constitutions. In order to evaluate one's Body Shape and Feature objectively we have been developing the Body Measuring Machine. Now we develop the 3D Automatic Body Measuring Machine(3D-ABMM). So we make an analysis of the 3D-ABMM's Accuracy. 2. Methods By using the 3D-ABMM and Vivid 9i(3D laser scanner, Konica Minolta) we have a surface scan of the three objects which are the upper body of the female and male Manikin and a male model. We overlap each scan data using the RapidForm2006 (3D scan data solution, INUS Technology) and calculate the average distance and standard deviation between the same point of each scan data. 3. Results and Conclusions In the female Manikin, the average distance is 0.84mm and the standard deviation is 1.16mm and the maximum distance is 10.68mm. In the male Manikin, the average distance is 1.12mm and the standard deviation is 1.19mm and the maximum distance is 12.00mm. In the male model, the average distance is 3.26mm and the standard deviation is 2.59mm and the maximum distance is 12.75mm. From the results, 3D-ABMM has good accuracy for scanning body and will be a usable hardware of the 3D Automatic Body Analysis Machine.