• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.861-869
• /
• 1986

A numerical study has been conducted on the development of the velocity and temperature fields in a laminar flow through an eccentric annular duct. A bipolar coordinates system is adopted, and a numerical program is developed to analyze 3-dimensional parabolic flow problems. In the analysis of the velocity field, the entrance length has been defined as the distance where the axial pressure gradient is greater than that of the developed velocity field by 5%. The dimensionless hydrodynamic entry length increases with increasing eccentricity. In the transverse flow fields, the reverse flow region along the wall due to the developing axial velocity near the entrance of the duct is found. In the analysis of the temperature field, the thermal entry length has been defined as the axial distance where the mean fluid temperature is 5% less than that of the developed temperature field. The dimensionless thermal entry length increases as eccentricity or Prandtl number increases. The overshoot of the mean Nusselt number over the developed value at the zero-temperature wall is encountered, and the rate of the overshoot increases with the increase of the eccentricity and Prandtl number.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.77-83
• /
• 2021

Solid oxide fuel cell (SOFC) operates at high temperatures in range of 600-800℃. Since layers of SOFC are composed of different substances, different thermal expansion in SOFC can result in defects under high temperature conditions. For understanding relation between temperature field and the thermal deformation in SOFC, temperature and strain field were simultaneously estimated using thermographic phosphors by optical measurement. Temperature fields were obtained by the life-time method, and the temperature differences of one specimen was checked with thermocouple. The thermal deformation was estimated by digital image correlation (DIC) method with extracted phosphorescence images. To investigate the deformation accuracy of DIC measurement, thermographic phosphors were coated with and without grid pattern on aluminum surface. Simultaneous measurement of temperature fields and thermal deformation were carried out for YSZ. This study will be helpful to multi-sensing of temperature field and thermal deformation on SOFC cells.

• The Plant Pathology Journal
• /
• v.19 no.2
• /
• pp.97-101
• /
• 2003

This study was conducted to determine the efficacy of Epicoccosorus nematosporus for the control of Eleocharis kuroguwai and to evaluate the meteorological factors which affect weeding efficacy in field conditions for three years (1996-1998). The best time to control E. kuroguwai with E. nematosporus as a biological control agent in the field was in July, when temperature ranged from 20.4 to $23.4^{\circ}C$; the surface wetness duration was 12.6-16.1 hours, and application time of 6:00 p.m. and 8:00 p.m.; and weeding efficacy was 81-90%. On 10 June 1996 in Milyang area, where the field experiments were performed, mean temperature was $16.5^{\circ}C$ with 11.3 hours of dew duration. Meanwhile, on 20 Aug. 1996 the temperature was $21.3^{\circ}C$ with 15.4 hours of dew duration. During these periods, the weeding efficacy was recorded at 61.8 and 60.8%, respectively. Time required for complete plant death was 25.8 and 25.6 days at application times 10 June and 20 Aug., respectively. At the time of application on 7,18, and 27 July 1996, mean temperature was 20.4-$23.4^{\circ}C$ with 12.6-16.5 hours of dew duration. The weeding efficacies of these periods were very hi일 with 81.4-90.8%. Three years of field observations from 1996 to 1998 showed that infection in the field can occur at any time through the summer season, although total infection rates vary between months and between years. In 1996, plant infection rapidly increased from 56% on 30 June, 82.4% on 15 July, 94.6% on 15 August, and 92.8% on 15 September under favorable meteorological conditions such as minimum temperature of $17.6^{\circ}C$ and maximum temperature of $27.1^{\circ}C$, with 86% relative humidity and 977.5 mm of rainfall during E. kuroguwai growing season. However, in 1997, the disease incidence was very low because of unfavorable weather conditions brought about by the hot temperature and the low amount of rainfall at 321.5 mm. Disease progress was slow from 24.4% on 30 June to 49.2% at the end of the growing season.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.1
• /
• pp.69-73
• /
• 2007

To establish the indoor-rearing system of the emma field cricket, Teleogryllus emma, the effects of temperature on development and reproduction of the emma cricket have been studied. The influence of temperature on developmental periods of emma field cricket was investigated under the eight temperatures of 15, 18, 21, 25, 27, 29, 31 and $35^{\circ}C$, under $60{\pm}5%$ R.H. and 16L:8D photoperiod. The developmental periods of T. emma nymphs had a range of 124.8 days to 44.4 days at the temperature of $21^{\circ}C$ and $35^{\circ}C$, respectively. At $15^{\circ}C$ and $18^{\circ}C$, however, all tested individuals died before emergence. The highest survival rate was 90% at $25^{\circ}C$, but there were no statistically significant differences among the temperatures. The adult weight increased with increasing temperatures although the weight at $35^{\circ}C$ was decreased. In addition, the influence of temperature on reproduction of emma field cricket was investigated under three temperatures $22^{\circ}C,\;25^{\circ}C\;and\;28^{\circ}C$, under $60{\pm}5%$ R.H. and 16L:8D photoperiod. The longevity of female/male adults were 65.8/79.2 days, 68.5/67.8 days, 46.8/57.4 days at the temperature $22^{\circ}C,\;25^{\circ}C\;and\;28^{\circ}C$, respectively. The preoviposition periods were 32.5 days at $22^{\circ}C,\;22.9^{\circ}C$ days at $25^{\circ}C$ and 22.1 days at $28^{\circ}C$. The highest average fecundity per female was 737.3 at $25^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1399-1408
• /
• 2000

A 2-dimensional temperature field measurement technique using PLIF (Planar Laser Induced Fluorescence) was developed and it was applied to an axisymmetric buoyant jet. Rhodamine B was used as a fluorescent dye. Laser light sheet illuminated a two-dimensional cross section of the jet. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured with an optical filter and a CCD camera. The spatial variations of temperature field of buoyant jet were derived using the calibration data between the LIF signal and real temperature. The measured results show that the turbulent jet is more efficient in mixing compared to the transition and laminar jet flows. As the initial flow condition varies from laminar to turbulent flow, the entrainment from ambient fluid increases and temperature decay along the jet center axis becomes larger. In addition to the mean temperature field, the spatial distributions of temperature fluctuations were measured by the PLIF technique and the result shows the shear layer development from the jet nozzle exit.

• Korean Journal of Remote Sensing
• /
• v.11 no.2
• /
• pp.29-42
• /
• 1995

A typhoon center location and its intensity from the 54.96GMz channel of Microwave Sounding Unit(MSU) on board the NOAA satellite is analyzed. NOAA satellite MSU channel 3 data may delineate the development and dissipation of the upper tropospheric warm core associated with a typhoon. The typhoon warm core is related to microwave imagery of 250hPa temperature field (54.96GMz). The typhoon center intensity, surface center pressure and maximum wind speed at the eye well, correlate to horozontal Laplacian of an upper tropospheric temperature field. The typhoon center is found from the analysis of 250hPa temperature field. The excellent correlation is found between the horizontal Laplacian of an tropospheric temperature field and surface maximum wind speed, another correlation is found between the warm temperature anomaly and surface pressure anomaly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1266-1275
• /
• 2000

This study was to research the actual condition of a dropworts working environment and to develope the clothing to reduce the work road. The actual conditions of working environment, working position and clothing were surveyed. Experiments were performed in the chamber and in the field. In the chamber, rectal temperature, 11 points skin temperatures(forehead, chest, abdomen, upperarm, forearm, dorsum manus, palm, thigh, calf, dorsum pedis and pelma), heart rates, microclimates inside clothing on the chest and subjective sensations were measured for comparing between 2 different types o garments. In the field, rectal temperature, abodomen skin temperature, 3 points microclimates inside clothing(chest, back and thigh), heart rates, the volume of EMG and subjective sensations were measured. The results were as follows; 1. There were no significant differences in rectal temperature between a old type protective clothing and a new type both in the chamber and the field. 2. Subjects wearing a old type clothing responded \"a little cold\", \"a little uncomfortable\" and subjects wearing a new type protective clothing responded \"normal\", \"comfortable\" both in the chamber and the field. 3. In the field test results, abodemen skin temperature in a old type clothing was higher and microtemperatures inside clothing of chest, back and thigh in a new type protective clothing were higher. 4. The volume of EMG was lower in the new type protective clothing than in the old one.protective clothing than in the old one.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.223-231
• /
• 2001

In order to provide some insights into the influence of electric field, gas composition, and gas temperature on electron energy distribution and electron transport characteristics, the Boltzmann equation was solved by using cross section data for electron collisions, Critical electric fields for the corona development in dry air and flue gas are 150 and 80 Td, respectively. It was seen that the decrease of critical electric field in flue gas is mainly caused by the $H_2O$ addition through the comparison of ionization and attachment coefficients of gas components. Increase of $O_2$, $H_2O$, and $CO_2$ contents in gas affected discharge characteristics according to their reciprocal characteristics between lowering the ionization threshold and increasing the electro-negativity. As electric field increases, electrons with higher energies in the electron energy distribution also increase. The mean and characteristic electron energies also linearly increase with electric field. The variation of flue gas temperature did rarely affect on the electron energy distribution function and electron transport characteristics, because the gas temperature is several hundreds or thousands times lower than the electron temperature.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.44-48
• /
• 2021

In order to obtain ultra-high resolution MRI images, research and development of 11 T or higher superconducting magnets have been actively conducted in the world, recently. The high-temperature superconductor (HTS), first discovered in 1986, was very limited in industrial application until mid-2010, despite its high critical current characteristics in the high magnetic field compared to the low-temperature superconductor. This is because HTS magnets were unable to operate stably due to the thermal damage when a quench occurred. With the introduction of no-insulation (NI) HTS magnet winding technology that does not burn electrically, it could be expected that the HTS magnets are dramatically reduced in weight, volume, and cost. In this paper, a 6 T-class NI HTS magnet for basic characteristic analysis was designed, and a distributed equivalent circuit model of the NI coils was configured to analyze the charging current characteristics caused by excitation current, and the charge delay phenomenon and loss were predicted through the development of a simulation model. Additionally, the critical current of the NI HTS magnets was estimated, considering the magnetic field, its angle and temperature with a given current. The loss due to charging delay characteristics was analyzed and the result was shown. It is meaningful to obtain detailed operation technology to secure a stable operation protocol for a 6T NI HTS magnet which is actually manufactured.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.85-92
• /
• 2009

This paper studied on the development of standardization tester for the field inspection of the rate of rise spot type heat detector. It was to find the problems of the 4 type's testers such as A type (electric bulb type), B type (halogen lamp type), C type (heating coil type), D type (fumigator type) which were used to check of the rate of rise spot type heat detector in inspection for the fire protection. To identify those problems, this paper described about the development of standardization tester for the field inspection of the rate of rise spot type heat detector and that have the function of auto setting temperature more $30^{\circ}C$ higher than room temperature and keep the constant temperature. And keep the constant wind velocity of 85cm/sec. Performance verification results of the developed prototype that had same conditions such as the sensitivity test conditions at the type approval of the rate of rise spot type heat detector.