• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.129-141
• /
• 2009

Intermodal freight transportation is defined as the movement of freight from origins to destinations by two or more transportation modes. When implemented in hub networks, it could enhance the efficiency of the networks because consolidated flows are transported by more suitable modes and technologies. In spite of this advantage, the intermodal hub network design problem has received limited attention in the literature partly because of the complex nature of the problem. This paper aims to develop an optimization model for designing intermodal hub networks with sin91e allocation strategy. The model takes into account various cost components of intermodal hub networks including transportation, stationary inventory, and service delay costs. Moreover, using transport frequency variables, it is capable of endogenously determining the transportation economies of scale achieved by consolidation of flows. As such, the model is able to realistically represent the characteristics of intermodal hub networks in practice. Since the model Is a complicated nonlinear integer programming problem, we perform model simplification based on the analytical study of the model, which could facilitate the development of solution algorithms in the future. We expect that this study contributes to the design of intermodal hub networks as well as to the assessment of existing logistics systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2002

Chufa (Cyperus esculentus L.) belongs to one of the sedge family and pows well in summer. The aboveground part of chufa is mostly consisted of leaves and the underground part is mostly composed of a clump of fibrous root with tuber. At the seeding year, it does not reproductive development but produces a lot of tuber. It produced many tillers from the tuber and grows in clumps as a bunch type. The plant height of mature chufa was 73 to 75cm and it grown fully in the middle of July. The number of tillers were increased rapidly until the end of July and still increased slowly after August but it showed very poor growth. The final fresh weight and dry matter yield of aboveground part of chufa were 40.3 tou/ha and 12.1 tou/ha. respectively. The regrowth of aboveground part was vigorous in the early stage of growth after 1st cutting but it was decreased rapidly after the second cutting. In control plot, the number of tubers per a clump were 722 at final stage and their fresh and drymatter yields per m: were 4.2kg and 1.9kg, respectively. In experimental plots, the amount of tubers was decreased steadily according to delay of cutting date, but late cutting date was not affect the tuber formation severely because the tuber produced already early in August. The nutritive value of chufa in vegetative growth stage was good but it was decreased according to growing up. The contents of crude protein(CP), neutral detergent fiber(NDF), dry matter digestibility (DMD) and total digestible nutrients(TDN) of aboveground part of chufa harvested finally were 6.1%, 51.5%, 39.8%, 33.2% and 39.4％, respectively. The contents of crude protein(CP), neutral detergent fiber(NDF), dry matter digestibility(DMD) and total digestible nutrients(TDN) of tubers of chufa were 6.1%, 81.5%, 39.8%, 33.2% and 39.4%, respectively and the content of oil was as high as 16.2%, especially.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.198-208
• /
• 1992

Recently, a nursery mat made from rock wool has realized transplanting of the younger seedlings with the ordinary transplanting machines for Chibyo and Chubyo(3 and 4～5 leaved seedling, respectively). The seedlings defined as the 'Nyubyo' or 'Nursling seedlings' became possible to achieve economic profits from the reduction in both working time and costs. It being widely noticed as a strategy to solve the difficulties in current rice cultivation. The nursling seedlings are 1.4 to 2.5 leaves and height at 4.5 to 7cm, grown 4 to 7 days after seeding. They maintain still up to 50 to 80% of their nutrients in the endosperm, and can grow by using only their own nutrients for a certain period of time after transplanting. Nursling seedlings take 2 days in the nursery chamber at 32$^{\circ}C$ after seeding, and 2 days in the greening house at $25^{\circ}C$. This is only 4 days, all together, to make the nursling seedlings of 1.5 leaves which are ready for transplanting. Watering is only needed once at the sowing time. It only takes 1 or 2 waterings even to raise a seedlings for a period of 7 days. The number of nursery boxes can be reduced because it is possible to sow more densely(220 to 240g per box), thus it only needs seedlings of 15 to 16 boxes per 10 a which leads to a reduction in facilities and space needed. Temperature during the nursery period can be artificially adjusted more precisely which may lead to the prevention of temperature stress. The nursling seedlings can root rapid by because the crown roots from the coleoptile node begin to emerge immediately after transplanting. They show strong resistance to low temperature (12$^{\circ}C$) and deep-planting. There is no danger in the rooting of the seedlings even if half of their height is buried into the soil. Moreover, it can root at a rate of up to 65 to 80% even if the full height of the seedlings is buried. They show also strong resistance to submergence (10～15cm). The nursling seedlings tend to grow by producing tillers from lower nodes. It is therefore, necessary to control to keep the proper numbers of tillers per unit area. They have no fear in the delay of heading and their yield components can be so well balanced that the same level of yield was achieved with the nursling seedlings compared to that with Chibyo. It was further suggested that if the surplus tillers can be avoided by such cultivation practices, the number of grain per panicle can be kept greater and higher yield can be realized. Practical experiments with the nursling seedlings conducted in 1989 and 1990 by farmers in various areas showed exciting results. The nursling seedlings will become widely spread, or at least occupy an important position in Japanese and also in Korean rice cultivation techniques.tivation techniques.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.166-171
• /
• 2017

For high-quality colored rice production, the cultivation environment is a critical factor. The major environmental factor is temperature, which includes the accumulated and average temperature during vegetative and reproductive stages. Generally, during the cultivation period, the temperature can be controlled by shifting the transplanting date. This study was carried out to determine the optimum transplanting date for high-quality red-colored rice production. Four red-colored rice varieties (Jeokjinju, Jeokjinjuchal, Hongjinju, and Gunganghongmi) were used as test materials. The transplanting dates were May 20 and June 5, 20, and 30 in 2015~2016. The most variable factor controlled by the transplanting date was the grain filling rate. The varieties transplanted on June 30 showed low yields owing to the decrease in the grain filling rate. In contrast, the polyphenol content increased with increasing delay in the transplanting date. Collectively, these two results indicate that the optimum transplanting date was June 20. The average temperature for 30 days after the heading date (30DAH) highly affected the polyphenol content. A lower temperature during the 30DAH induced higher polyphenol contents but also caused low yield. The optimum 30DAH temperature for obtaining a higher yield and polyphenol content was $22{\sim}23^{\circ}C$. Using the average 30DAH and accumulated temperatures, the optimum transplanting date was calculated as June 18 to 24 in Miryang region. The optimum transplanting date of Kyeungsangnamdo region was approximately mid-June to early July, and that of Kyeungsangbukdo region was approximately early to mid-June.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.9-18
• /
• 1998

There are about 1470 stone-cultural properties in Korea which have been registered and protected by the government. Representative of them are pagoda, stupa, stone-buddha, stele support of banner pole and stone-lanterns. Most of them have been exposed to and weathered by natural environments. Stone-cultural properties are destroyed and/or destructed mostly by weathering and its related features of rocks. Therefore, it is necessary to conduct geological studies on the weathering phenomena and related features as well as characteristics of the rock itself must be done for the conservation. Thus geological investigation should include detail measurements, rock varieties and phases, structural lineaments of the rock, cause and degree of weathering, degree and patterns of crack development structural stability, identification of reusable parts for restoration, geomorphological characteristics of the site, and etc. The interaction among these factors must be investigated and analyzed, which must be used as basic data to establish the guideline of conservation and to plan for repair and/or restoration. The conservation plan should involve parts to be repaired, method of repair, type of cementing material, the characteristics of rock phases to be supplemented, method for maintaining structural stability, and method to delay or to prevent the rock weathering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.42-47
• /
• 2008

Prevention of postprandial hyperglycemia is important, as it is implicated in the development of macro- and microvascular complications associated with diabetes. An inhibitor of ${\alpha}$-amylase which acts in the first step of carbohydrate digestion, is expected to be a suppressor of postprandial hyperglycemia. This study investigated the porcine pancreatic ${\alpha}$-amylase inhibitory activity of the extracts from buckwheat (Fagopyrum esculentum) flower, leaf, stem and grain. Flower, leaf, stem and grain of buckwheat were extracted by water and ethanol (40%, 70%, 100%), respectively. Flower and leaf extracts were more effective ${\alpha}$-amylase inhibitors than stem and grain extracts in all tested solutions. Ethanol extracts were more effective than water extracts or powders on the ${\alpha}$-amylase inhibitory activities. At concentrations of $0.5%{\sim}10%$ (w/w, starch basis), the flower extracts of 40%, 70% and 100% ethanol lowered the enzyme activity by about 90% and the results were similar to the values of acarbose. At the same concentrations, the leaf extracts of 100% ethanol lowered the enzyme activity by about 90%. These results suggest that buckwheat flower and leaf ethanol extracts may delay carbohydrate digestion and lower postprandial hyperglycemia.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.58-69
• /
• 2002

Most of the traffic accidents are a rear-end collision and a clash generated in the signalized intersection on the local roads. So, it is demanded that the high-quality of signal control and dilemma zone control. According to the cases generated by foreign countries, we established the strategies which are composed of Volume-Density Control, strategy of the dilemma zone control using R-detector (microwave detector) In Japan and EC-DC Control. MOEs(Measure of effectiveness) are car numbers in the dilemma zone , max-out probability in the safe side and the average stopping delay in the progress side. We choose a signalized intersection in rural highway to analyze the effect of the strategies and practiced an on-the-spot survey. The result of the survey is applied to the basic data in the simulator. Consequently, strategy of the dilemma zone control using R-detector(microwave detector) in Japan is the best effective in the safe side and EC-DC control is the best in the progress side. Based on the result, we developed the effective strategy of the signal control . This strategy is composed of the strategy of Japan and the detector on the stopping line used in the EC-DC control. On the result of the analysis, new strategy is the best effective in two sides.

• Research in Community and Public Health Nursing
• /
• v.14 no.1
• /
• pp.106-119
• /
• 2003

This study was executed to develop the model of the format of the day care center which supplies the total service on the health care in the day time and social program related with the work and to evaluate the processing courses which was adjusted for 3 years from March 1999 to December 2001 in order to improve the quality of life of the family who experience dementia, dementia prevention, and the old and the burden of daily activities. The processing courses of this business model were evaluated to the confirmation on the health condition, application of the nursing processes, and the precise medical examination, and 20 sorts of social programs. The methods used in this model were the simplified MMSE-K, Ability for ,Daily Life(ADL), Instrumental Activities of Daily Living(IADL), and nursing process, and so on. The execution effects of this model are as follows. 1. It can contribute to the delay in the dementia process of the old people who are related with the dementia and maintenance and improvement of the health by confirming the stopping of the process of the dementia as the objective estimation method while the dementia symptom is maintained as the current condition through the medical and social total services. 2. The reduction of the burden for the daily care of the subject people and their families for the old people who are concerned with the dementia helped to improve the quality of life of the subject people and their family by enabling them to have jobs. 3. It enabled them to positively cope with the demand for the health and nursing of the local residents related to the old people. 4. It enabled them to enhance the recognition for the socialization of the local social organization and residents for the old people. 5. It enabled them to reinforce the related system among the local social organizations, and develop and provide the various social programs which are proper for the old people.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.175-180
• /
• 2010

In the almost application parts, GNSS being used the primary navigation system on world-widely. However, some of nations attempt or deliberate to enhance current Loran system, as a backup to satellite navigation system because of the vulnerability to the disturbance signal. Loran interests in supplemental navigation system by the development and enhancement, which is called eLoran, and that consists of advancement of receiver and transmitter and of differential Loran in order to increase the accuracy of current Loran-C. A significant factor limiting the ranging accuracy of the eLoran signal is the ASF in the TOAs observed by the receiver. The ASF is mostly due to the fact that the ground-wave signal is likely to propagate over paths of varying conductivity and topography. This paper presents comparison results between the predicted ASF and the measured ASF in a southern east region of Korea. For predicting ASF, the Monteath model is used. Actual ASF is measured from the legacy Loran signal transmitted Pohang station in the GRI 9930 chain. The test results showed the repeatability of the measured ASF and the consistent characteristics between the predicted and the measured ASF values.