• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.519-524
• /
• 2003

Systems engineering test and evaluation technology development program for (Korea) Express Tilting Train(TTX) system in progress is a national large system development program that is not only a large-size and complex but also multi-disciplinary in nature. For the TTX test and evaluation technology development, verification requirements that could verify system function and performance, should be derived from system specification. Hereafter, this could be listed as items of test. System engineering process establish traceability between items of test and system requirements. These tasks could be accomplished by the schema. Using the Core, a system engineering tool, TTX program could be database and similar other system could be developed effectively and efficiency

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.102-110
• /
• 2023

The MATS(Missile Assembly Test Set) is manufactured and used to check the function of the missile during the period of development for the guided missile system, and the requirements for power and communication are managed for equipment production. The MATS developer implements software according to the proposed communication standard to guarantee the reliability of the data that communicates with the guided missile. The test bed is built and self-performance evaluation is performed after implementation. And the verification process is performed using the standard equipment. The characteristics of periodic delay for data transmission must be reflected when building a test bed. This paper describes a test bed construction method for data processing with periodic delay. Also This paper compares and evaluates the performance by changing the previously designed algorithm.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2023

The number of test samples was calculated by setting the reliability growth management test period considering the weapon system development period. The optimal reliability growth management test design condition was 80% reliability, 60% confidence level, and 6 months of test period. At this time, it was analyzed that 4 test samples were required if 0 failure occurred, and 9 test samples were required if 1 failure occurred. Using the method of determining the number of samples presented in this paper, it can be used as a basis for acquiring a budget for the number of samples for reliability growth management when switching from the exploratory development stage to the system development stage.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.9-16
• /
• 2017

This study describes the development of a 1-inch cryogenic glove valve for an LNG pumping system and localization development achieved through the performance test. The cryogenic valve used in the LNG pumping system plays an important role in maintaining a flow rate by LNG transportation. This trial manufactured goods, which was achieved through reverse engineering and developing the assembly process. The result of the leak test satisfied the internal pressure condition using the 78-bar normal temperature test and maintained the anti-leakage condition. Also, the result of the cryogenic leak test (BS 6364: low temperature test procedure) maintained anti-leakage at -196 and 52 bar, which satisfied the test standards.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.544-547
• /
• 2007

Because data processing systems in recent years are more complicated, main function of the data processing is divided as several sub-functions which are implemented and verified in each subsystem of the data processing system. For the verification of data processing system, many interface tests among subsystems are required and also a lot of simulation systems are demanded. This paper proposes CTHS (Common Test Harness System) for satellite ground segment development which has all of functions for interface test of the data processing system in one PC. Main functions of the CTHS software are data interface, system log generation, and system information display. For the interface test of the data processing system, all of actions of the CTHS are executed by a pre-defined operation scenario which is written by purpose of the data processing system test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.138-144
• /
• 2004

Occupant protection in the side impact of a vehicle becomes one of the most important issues today. So, to reduce development time and cost, it needs test equipment which conducts an accurate simulation of the side impact crash. This paper describes a new test method for side impact, which utilizes a standard 12inch-HYGE-type sled facility. If a side impact sled test can simulate vehicle intrusion very well, it will contribute to develop full-scale side impact crash performance. The newly developed sled test method enables simulation for dummy motion, injury, door velocity, trim crack, and vehicle structure to be accurate. Ant also this sled test method can be applied to the development of side air-bag.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.40-46
• /
• 2021

At launch, satellites are exposed to various types of structural loads, such as quasi-static loads, sinusoidal vibrations, acoustic/random vibrations, and shocks. The launch environment test is aimed at verifying the structural stability of the test object against the launch environment. Various types of launch environments are simulated by simple vibration, acoustic, and shock tests considering possible test conditions in ground. However, the difference between the launch environment and the test environment is one of the causes of excessive testing. To prevent overtesting, a notching technique that adjusts the frequency range and the input load considering the design load is applied. For notching, specific procedures are established considering the satellite development concept, selected launch vehicle, higher system requirements, and test target level. In this study, the notching method, established procedure, and development of a notching toolkit for efficient testing are described.

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.403-412
• /
• 2021

As the number of mobile apps increases exponentially, automation of tests performed in the app development process is becoming more important. Until the app is released, iterative verification is performed through various types of tests, and this study was conducted focusing on the GUI test among various types of tests. This study is meaningful in that it can contribute to the stable app distribution of the developer by suggesting the development direction of the GUI test. To develop Android's GUI test tool, I collected basic data before presenting the development method by researching Android's UI controls and Material design guideline. After that, for the existing GUI test automation tool, two tools based on screen capture test and four tools based on source code analysis test were studied. Through this, it was found that existing GUI test tools don't consider visual design, usability, and component arrangement. In order to supplement the shortcomings of existing tools, a new GUI test automation tool development method was presented based on the basic data previously studied.

• Clinical and Experimental Pediatrics
• /
• v.45 no.6
• /
• pp.700-711
• /
• 2002

Purpose : Early identification and treatment of developmental disabilities is of considerable importance in the health care of children. Screening of development is aimed at identifying infants who may need more comprehensive evaluations. Methods : A new test, the Ewha Infant Development Screening Test(EDST) has been created to screen the development of infants, 0-4 years of age. EDST was constructed so that results can be calculated into developmental ages and developmental quotients. The test consists of three sectors, e.g. language, social-adaptive and motor, and of 158 test items. A total of 104 infants, aged from one month to four years, including healthy infants as well as 10 with chief complaints of developmental delay, who visited the pediatric clinic of Ewha Womans University Dongdaemun Hospital, from June, 25 to November 30, 2001, were given the Bayley Scale of Infant Development as a base test and EDST. Results : The result showed the appropriate cut-off of EDST was 90 with better sensitivity and specificity, compared to cut-offs of 85 or 80. Conclusion : Further study with a large number of infants in the future is needed to make EDST more reliable and accurate.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.388-396
• /
• 2011

Mission Equipment Package(MEP) system is a collection of avionic components that are integrated to perform the mission of the Korean Utility Helicopter(KUH). MEP system development is classified mission-critical embedded system but KUH MEP system developed including flight-critical data implementation. It is important to establish the good development and verification process for the successful system development. This paper describe the development and verification process in each phase for the KUH MEP system. MEP system design is verified through the qualification test, system failure test and compatibility test in System Integration Laboratory(SIL).