• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.992-998
• /
• 2014

Acoustic radiation efficiency is one of the important factors in the prediction of underwater radiated noise of ships. A ship has much equipment to operate successful mission in a ship. Most of equipment is running simultaneously as multi-excitation and becomes the source of underwater radiated noise. In many cases of multi-excitation, phase difference between multi-excitation is not considered. Because vibration response under multi-excitation is the vector sum of each single excitation, acoustic radiation efficiency based on surface velocity field can be affected by phase of excitation. In this study, acoustic radiation efficiency of a plate on air and a stiffened cylindrical model in water under multi-excitation with phase difference is investigated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.5
• /
• pp.368-378
• /
• 2023

Changes in contents of free sugars, amino acids, and fatty acids of legumes were analyzed for each phase of in vitro digestion. In addition, contents of resistant starch in raw and digested pulses were compared. Soybeans, kidney beans, cowpeas, and chickpeas were analyzed. An in vitro digestion model was used to analyze contents of nutrients using LC-MS and GC-MS. Stachyose in kidneybean, cowpea, and chickpea increased as the digestion phase progressed. In four types of legumes, raffinose slightly decreased or showed no significant difference between the Oral phase and the BBMV phase. Content of glucose, a monosaccharide, increased during the BBMV phase. During the digestion phase, levels of free amino acids and free fatty acids also increased. Content of resistant starch was reduced compared to that in the raw material. It was 0.01g/100 g food in soybean, 1.06 g/100 g food in red kidney bean, 0.77g/ 100g food in cowpea, and 0.76 g/100 g food in chickpea. It was confirmed that nutrients in the in vitro digestion model were liberated at each digestion phase with changes in the content of resistant starch. These results are expected to be used as fundamental data for obtaining bioavailability of nutrients.

• Development and Reproduction
• /
• v.21 no.3
• /
• pp.297-305
• /
• 2017

An experiment was conducted to investigate the annual reproductive cycle of a Korean endemic species, Acheilognathus majusculus, from Jeokseong-myeon located in Seomjin River. The reproductive cycle is examined histologically regarding water temperature and day length of the habitat, the gonadosomatic index (GSI), the female ovipositor length index (OLI), monthly variation in egg diameter distribution, and developmental characteristics of female and male gonads. The maximum GSI was found in $19.21{\pm}2.32$ and $6.90{\pm}0.53$ for female and male respectively when water temperature ($14^{\circ}C$) and day length (11.1hr) began to rise. On the other hand, the minimum level was reached during August ($1.87{\pm}0.67$ for female and $0.88{\pm}0.50$ for male). No samples represent with measurable ovipositor between September and November, while the longest ovipositor length index was in April ($79.68{\pm}4.69%$). We compared and calculated the stages of testis and ovary development process in order to determine the germ cell development characteristics and the reproductive cycle. According to the result, we classified the female Acheilognathus majusculus reproductive cycle into four stages: Ripe (April) and spawning phase (May to June), degenerative phase (July), growing phase (August to December), and mature phase (January to March). The annual reproductive cycle of male Acheilognathus majusculus was categorized into five stages viz. Ripe and spawning phase (May to June), degenerative phase (July to August), resting phase (September to November), growing phase (December to February), and mature phase (March to April).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.23-34
• /
• 2014

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.

• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.123-126
• /
• 2007

In this work, the dispersion behavior of $Y_2O_3$ particles in binary aluminum (Al)-copper (Cu) cast alloy was investigated with respect to Cu contents of 20 (hypoeutertic), 33 (eutectic) and 40 (hypereutectic) wt.%. In cases of hypo and hypereutectic compositions, SEM images revealed that the primary Al and ${\theta}$ phases were grown up at the beginning, respectively, and thereafter the eutectic phase was solidified. In addition, it was found that some of $Y_2O_3$ particles can be dispersed into the primary Al phase, but none of them are is observed inside the primary 6 phase. This different dispersion behavior of $Y_2O_3$ particles is probably due to the difference in the val- ues of specific gravity between $Y_2O_3$ particles and primary phases. At eutectic composition, $Y_2O_3$ particles were well dispersed in the matrix since there is few primary phases acting as an impediment site for particle dispersion during solidification. Based on the experimental results, it is concluded that $Y_2O_3$ particles are mostly dispersed into the eutectic phase in binary Al-Cu alloy system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.510-516
• /
• 2013

This paper suggests a 3-phase series-resonant type high voltage capacitor charger for an EML pulsed power system. The operating principle on the charger is explained by an equivalent circuit. Additionally, we analyze the charging characteristic in one discontinuous conduction mode and three continuous conduction modes. The analysis shows that the resonant current per phase is two thirds of the 3-phase charger's average charging current and one third of the single-phase charger's average charging current with the same capacity. We suggest a design method of the 3-phase capacitor charger in each operational mode and present an example of 3.5 kW capacitor charger at ${\omega}_s=0.33{\omega}_r$. The 3.5 kW 3-phase capacitor charger prototype is assembled with a TI28335 controller and a 40 kJ, 7 kV capacitor. The design rules based on the analysis are verified by experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.515-518
• /
• 1997

Resident time of the centrifugal extractor for organic phase extraction using a height controlled separator weir and a divert plate is the important factor that affects significantly the chemical material extraction and the productivity in the chemical and mechanical processes. In this paper, it describes the design of the device for extraction of an organic phase from radioactive wastes, and considers phase separating weir and divert disk, both being designed to be adjustable in their positions, for effectively separating an organic phase. A height-adjustable separating weir unit used for separating the organic phase from the aqueous phase using a phase separating weir and designed to control the height of the separating weir as desired so as to allow the weir to be positioned at a boundary layer between two separated phases. The centrifugal extractor controls satisfactorily the mixed reaction time of two phases within the separator regardless of the variations of the mixing ratio of the two phases and the rotating speed of the extractor, is designed to be adjustable in its position in the vertical direction, thus allowing the user to appropriately select the mixed reaction time of the two phases within the extractor as desired. From development of a centrifugal extractor, it can effectively recover such usable elements, and preferably reducing the output quantity of radioactive wastes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.147-156
• /
• 2011

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.295-302
• /
• 1987

Korea is a small country with extremely high population density. Industrialization of the nation resulted GNP per capita of over 2,000$ in 1986 with an inevitable by-product, high level of pollution in many areas. Forest land is now acknowledged as not only a wood production site but also an origin of much more important intangible values, water and clean air, soil conservation, and recreational and scenic values. Mostly devastated forest land from Korean War has been recovered under the strong afforestation drive from the government. The first Forest Development Plan was mostly reforestation phase and the second Forest Development Plan is foundation establishment phase. The third and later Plans are to enlarge economical forest and to maintain sustatined yield phase. Forestry administration as well as forest research certainly played a great role in successful accomplishment of two Forest Development Plans. For effective planning and accomplishment of the third Forest Development Plan close cooperation among policy makers, forest managers and research workers are mostly required.