• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.992-998
• /
• 2014

Acoustic radiation efficiency is one of the important factors in the prediction of underwater radiated noise of ships. A ship has much equipment to operate successful mission in a ship. Most of equipment is running simultaneously as multi-excitation and becomes the source of underwater radiated noise. In many cases of multi-excitation, phase difference between multi-excitation is not considered. Because vibration response under multi-excitation is the vector sum of each single excitation, acoustic radiation efficiency based on surface velocity field can be affected by phase of excitation. In this study, acoustic radiation efficiency of a plate on air and a stiffened cylindrical model in water under multi-excitation with phase difference is investigated.

• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.

• 한국식품영양학회지
• /
• 제36권5호
• /
• pp.368-378
• /
• 2023

Changes in contents of free sugars, amino acids, and fatty acids of legumes were analyzed for each phase of in vitro digestion. In addition, contents of resistant starch in raw and digested pulses were compared. Soybeans, kidney beans, cowpeas, and chickpeas were analyzed. An in vitro digestion model was used to analyze contents of nutrients using LC-MS and GC-MS. Stachyose in kidneybean, cowpea, and chickpea increased as the digestion phase progressed. In four types of legumes, raffinose slightly decreased or showed no significant difference between the Oral phase and the BBMV phase. Content of glucose, a monosaccharide, increased during the BBMV phase. During the digestion phase, levels of free amino acids and free fatty acids also increased. Content of resistant starch was reduced compared to that in the raw material. It was 0.01g/100 g food in soybean, 1.06 g/100 g food in red kidney bean, 0.77g/ 100g food in cowpea, and 0.76 g/100 g food in chickpea. It was confirmed that nutrients in the in vitro digestion model were liberated at each digestion phase with changes in the content of resistant starch. These results are expected to be used as fundamental data for obtaining bioavailability of nutrients.

• 한국발생생물학회지:발생과생식
• /
• 제21권3호
• /
• pp.297-305
• /
• 2017

An experiment was conducted to investigate the annual reproductive cycle of a Korean endemic species, Acheilognathus majusculus, from Jeokseong-myeon located in Seomjin River. The reproductive cycle is examined histologically regarding water temperature and day length of the habitat, the gonadosomatic index (GSI), the female ovipositor length index (OLI), monthly variation in egg diameter distribution, and developmental characteristics of female and male gonads. The maximum GSI was found in $19.21{\pm}2.32$ and $6.90{\pm}0.53$ for female and male respectively when water temperature ($14^{\circ}C$) and day length (11.1hr) began to rise. On the other hand, the minimum level was reached during August ($1.87{\pm}0.67$ for female and $0.88{\pm}0.50$ for male). No samples represent with measurable ovipositor between September and November, while the longest ovipositor length index was in April ($79.68{\pm}4.69%$). We compared and calculated the stages of testis and ovary development process in order to determine the germ cell development characteristics and the reproductive cycle. According to the result, we classified the female Acheilognathus majusculus reproductive cycle into four stages: Ripe (April) and spawning phase (May to June), degenerative phase (July), growing phase (August to December), and mature phase (January to March). The annual reproductive cycle of male Acheilognathus majusculus was categorized into five stages viz. Ripe and spawning phase (May to June), degenerative phase (July to August), resting phase (September to November), growing phase (December to February), and mature phase (March to April).

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.23-34
• /
• 2014

소프트웨어 프로젝트에 대해 12개의 다른 소프트웨어 생명주기 모델들이 제안되었지만 모든 소프트웨어의 특성을 만족시킬 수 있는 일반화된 모델이 없는 실정이다. 개발조직은 여러 모델들을 적절히 혼합하여 개발될 시스템과 능력에 맞도록 새로운 모델을 개발하여야만 한다. 본 논문에서는 다양한 소프트웨어 개발 상황에 보다 적합할 것으로 판단되는 중첩-동시개발 생명주기 모델을 제안하였다. 먼저, 개발 과정을 추상화와 구현으로 구분하여 추상화는 개념정립단계부터 상세설계단계 시작시점까지로, 구현은 상세설계단계부터 시스템 시험단계로 분류하였다. 다음으로, 추상화는 파레토 법칙을 적용하여 하나의 단계에서 개발될 기능이 20% 진행된 시점에서 다음 단계를 시작하는 중첩된 단계 개념을 도입하였다. 구현은 하나의 UC가 완료되면 바로 다음 단계 수행 팀에게 전달하여 여러 단계가 동시 수행되어 개발하는 형태를 도입하였다. 제안된 모델은 개발자원 활용의 비효율성을 크게 줄일 수 있는 장점이 있다. 제안된 모델을 적용시 보다 빠른 시간에 보다 저렴한 비용으로 보다 좋은 품질의 소프트웨어를 개발하여 고객에게 납품할 수 있어 고객을 만족도를 향상시킬 수 있으며, 더불어 소프트웨어 개발 성공률을 높이는데도 기여할 것으로 판단된다.

• 한국분말재료학회지
• /
• 제14권2호
• /
• pp.123-126
• /
• 2007

In this work, the dispersion behavior of $Y_2O_3$ particles in binary aluminum (Al)-copper (Cu) cast alloy was investigated with respect to Cu contents of 20 (hypoeutertic), 33 (eutectic) and 40 (hypereutectic) wt.%. In cases of hypo and hypereutectic compositions, SEM images revealed that the primary Al and ${\theta}$ phases were grown up at the beginning, respectively, and thereafter the eutectic phase was solidified. In addition, it was found that some of $Y_2O_3$ particles can be dispersed into the primary Al phase, but none of them are is observed inside the primary 6 phase. This different dispersion behavior of $Y_2O_3$ particles is probably due to the difference in the val- ues of specific gravity between $Y_2O_3$ particles and primary phases. At eutectic composition, $Y_2O_3$ particles were well dispersed in the matrix since there is few primary phases acting as an impediment site for particle dispersion during solidification. Based on the experimental results, it is concluded that $Y_2O_3$ particles are mostly dispersed into the eutectic phase in binary Al-Cu alloy system.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.510-516
• /
• 2013

This paper suggests a 3-phase series-resonant type high voltage capacitor charger for an EML pulsed power system. The operating principle on the charger is explained by an equivalent circuit. Additionally, we analyze the charging characteristic in one discontinuous conduction mode and three continuous conduction modes. The analysis shows that the resonant current per phase is two thirds of the 3-phase charger's average charging current and one third of the single-phase charger's average charging current with the same capacity. We suggest a design method of the 3-phase capacitor charger in each operational mode and present an example of 3.5 kW capacitor charger at ${\omega}_s=0.33{\omega}_r$. The 3.5 kW 3-phase capacitor charger prototype is assembled with a TI28335 controller and a 40 kJ, 7 kV capacitor. The design rules based on the analysis are verified by experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.515-518
• /
• 1997

Resident time of the centrifugal extractor for organic phase extraction using a height controlled separator weir and a divert plate is the important factor that affects significantly the chemical material extraction and the productivity in the chemical and mechanical processes. In this paper, it describes the design of the device for extraction of an organic phase from radioactive wastes, and considers phase separating weir and divert disk, both being designed to be adjustable in their positions, for effectively separating an organic phase. A height-adjustable separating weir unit used for separating the organic phase from the aqueous phase using a phase separating weir and designed to control the height of the separating weir as desired so as to allow the weir to be positioned at a boundary layer between two separated phases. The centrifugal extractor controls satisfactorily the mixed reaction time of two phases within the separator regardless of the variations of the mixing ratio of the two phases and the rotating speed of the extractor, is designed to be adjustable in its position in the vertical direction, thus allowing the user to appropriately select the mixed reaction time of the two phases within the extractor as desired. From development of a centrifugal extractor, it can effectively recover such usable elements, and preferably reducing the output quantity of radioactive wastes.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.147-156
• /
• 2011

소프트웨어 프로젝트를 개발하는 방법론에는 20여 가지의 개발 프로세스 모델들이 존재한다. 그러나 모든 소프트웨어의 특성을 만족시킬 수 있는 일반화된 하나의 모델이 없는 실정으로 개발조직은 여러 모델들을 적절히 혼합하여 개발될 시스템과 개발팀의 능력에 맞도록 새로운 모델을 개발하여야만 한다. 본 논문에서는 다양한 소프트웨어 개발 상황에 보다 적합할 것으로 판단되는 동시개발 프로세스 모델을 제안한다. 먼저, 개발 요구사항 목록들이 작성되면, 요구사항을 중요도에 따라 20:80 비율로 분할하고, 중요한 20% 요구사항의 요구사항 분석과 아키텍쳐 설계가 완료될 때까지는 순차적으로 수행한다. 20%의 중요 요구사항에 대해 상세설계를 시작하는 시점에서 나머지 80%의 요구사항에 대한 요구사항 분석단계를 동시에 수행하는 개념이다. 동시개발은 타임박스(Timebox) 개념으로 수행되며, 이때 적용되는 순차적, 반복적 & 점진적 또는 Agile 방법들에 따라 각 타임박스에서 개발되는 요구사항의 분할 비율은 차이가 발생한다. 순차적, 반복적 & 점진적 또는 Agile 방법론을 동시개발 개념을 적용한 결과 단일화된 프로세스 모델로 표현할 수 있었다. 제안된 모델은 개발 단계들을 팀 단위로 수행할 경우 개발자원 활용의 비효율성을 크게 줄일 수 있다. 또한, 동시개발 개념을 적용하여 단계들이 중첩되어 수행되므로 개발기간도 크게 단축시키는 장점이 있다. 따라서 제안된 모델은 보다 빠른 시간에 보다 저렴한 비용으로 보다 좋은 품질의 소프트웨어를 개발하여 고객에게 납품할 수 있어 고객을 만족도를 향상시킬 수 있으며, 더불어 소프트웨어 개발 성공률을 높이는데도 기여할 것으로 판단된다.

• 한국산림과학회지
• /
• 제76권3호
• /
• pp.295-302
• /
• 1987

Korea is a small country with extremely high population density. Industrialization of the nation resulted GNP per capita of over 2,000$ in 1986 with an inevitable by-product, high level of pollution in many areas. Forest land is now acknowledged as not only a wood production site but also an origin of much more important intangible values, water and clean air, soil conservation, and recreational and scenic values. Mostly devastated forest land from Korean War has been recovered under the strong afforestation drive from the government. The first Forest Development Plan was mostly reforestation phase and the second Forest Development Plan is foundation establishment phase. The third and later Plans are to enlarge economical forest and to maintain sustatined yield phase. Forestry administration as well as forest research certainly played a great role in successful accomplishment of two Forest Development Plans. For effective planning and accomplishment of the third Forest Development Plan close cooperation among policy makers, forest managers and research workers are mostly required.