• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• 재활복지공학회논문지
• /
• 제6권2호
• /
• pp.15-22
• /
• 2012

외골격 보행보조로봇은 로봇 시스템을 인체에 직접 착용하는 형태이므로 기구적인 측면에서는 인체 근골격 구조에 최적화된 메커니즘으로 구성되어야 하며, 제어적인 측면에서는 근골격계의 손상을 일으킬 수 있는 로봇의 부적합한 거동을 예방할 수 있는 안전장치를 갖추어야 한다. 외골격 보행보조로봇을 개발하기 위해서는 보행이나 근골격계의 거동특성에 대한 이해 및 분석이 필요하다. 본 연구에서는 최적화된 로봇시스템 설계를 위하여 구동장치의 관절력과 동력 용량을 예측하였으며 몇 가지 보행동작에 대한.관절거동특성을 파악할 수 있는 자료를 획득하였다. 평지보행을 제외한 나타나는 주요한 동작으로는 계단오르고 내리기, 안기, 서기, 경사면 걷기 등이 있다. 본 연구에서는 경사면 걷기를 제외한 모든 동작에 대한 동작 실험을 수행하고 분석하였다.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 공업화학
• /
• 제26권3호
• /
• pp.247-250
• /
• 2015

유기 발광 다이오드(OLED)는 학문 및 산업 분야에서 많은 관심을 받아왔다. OLED는 기존에 사용되고 있는 광원들과는 달리 면 발광, 친환경적인 에너지 사용, 대면적, 초경량, 그리고 초박형 등의 차별화된 특징을 가지고 있기 때문에 최근 조명 시장에서 많은 관심을 받고 있다. 게다가, OLED 조명은 LED 형광등을 대체할 수 있는 차세대 조명으로써 주목되고 있다. 본 논문에서는 white OLED (WOLED)에 적용되고 있는 대표적인 인광 발광 재료들을 소개하며, 특히 yellow, orange, red 인광 물질들의 화학구조와 소자효율을 정리하였다. 이러한 선행연구의 물질들을 이해하고 인광 물질들을 체계적으로 분류함으로써 새로운 발광 재료를 연구하고 개발함에 있어서 많은 도움이 되리라고 생각한다.

• 멤브레인
• /
• 제23권6호
• /
• pp.409-417
• /
• 2013

이산화탄소의 효과적인 분리 및 포집을 위해서 등방성 다공성 구조의 폴리프로필렌(pp) 격자의 내부에 제올라이트 입자들이 표면 덮임 없이 균일하게 분포되어 있는 흡착투과중공사막(APM: adsorptive permeation hollow fiber membrane)을 개발하였다. 본 연구에서는 이산화탄소/질소 혼합물을 모사 기체혼합물로 사용하였는데, 공급되는 기체혼합물 모두가 APM을 투과하면서 이산화탄소는 APM 내 분포되어 있는 흡착제에 흡착되고 질소는 투과하여 배출된다. APM이 장착된 모듈을 제조하여 이에 대한 흡착투과실험을 수행하여 흡착투과 성능을 분석하였고 또한 포화 흡착된 APM을 진공압에서 탈착 재생하여 그 결과를 재생효율과 에너지소모 관점에서 고찰하였다.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.660-668
• /
• 2012

The purpose of this study is to analyze the thermal characteristics of garments marketed for Korean males and to investigate the influence of each garment on ensemble, by measuring their insulation values(clo) using thermal manikins. The results are as follows. The total insulations(clo) of ensembles for S/S seasons are between 1.46 and 2.6 clo, with the mean of 2.12 clo. The insulation in the still air condition is 1.23 clo, which means a decrease of 42% compared to the total insulation of all the component garments. The insulation of ensembles for S/S seasons in the dynamic air condition decreased by 46.8%, compared to the still air condition. The total insulation(clo) of ensembles for F/W seasons is between 3.84 and 7.36 clo with the mean of 4.74 clo. The insulation in the still air condition is 2.26 clo, which means a decrease of 53.6% compared to the total insulation of all the component garments. The insulation of ensembles for F/W seasons in the dynamic air condition decreased by 36.2%, compared to the still air condition. As the clo value of each component garment gets higher, the insulation of ensembles gets higher. Especially, the insulation of ensembles was more influenced by outer wear than inner wear. The insulation of ensembles could be predicted by the insulation of outerwear better.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권4호
• /
• pp.489-493
• /
• 2003

Reproductive traits of sows are determined chiefly by the genetic background of the dam herself. Whether the breed of the serviced boars also contributes is not yet clear. A total of 8,946 litters of Landrace (L) sows from 68 farms were examined. Of these, 876, 1,260, and 6,810 litters were produced from natural mating with L, Yorkshire (Y), and Duroc (D) breeds, respectively. The birth litter size (BLS), weaning litter size (WLS), live born piglets (LBP), and survival rate % (SR), of every litter were recorded. A general linear-model procedure was followed to estimate the effects of boars' breed (B), parity (P) and B${\times}$P interaction on the reproductive traits of the sows. Results show that BLS, WLS, and LBP were all significantly (p<0.001) affected by B and P. SR% was significantly influenced by B but not by P. L sows crossbred with Y or purebred with L produced litters with higher BLS, WLS, and LBP values than those bred with D. Pure L breeding yielded litters with lower SR% than did crossbreeding with D, while the difference between SR% due to LY and that due to LD crossbreeding was not significant. The interaction of B with P was significant with respect to BLS, WLS, and LBP (p<0.001), but not SR%. No significant B effect on reproductive traits was measured in sows at their first parity; but at latter parities, LL or LY produced litters with similarly high BLS, WLS and LBP, which values were all significantly greater than those of LD litters. The breed of boar evidently affected the subsequent reproductive performance of L sows and this effect may be further manipulated by the parity effect. Breed differences in semen quality and the success of fetus development with different interactions of the genetic background with the uterus function of the sow that may contribute to these effects are discussed.

• 제어로봇시스템학회논문지
• /
• 제20권6호
• /
• pp.669-675
• /
• 2014

In this paper, we described the investigated theoretical time synchronization performances and experiment results obtained by commercially provided PTP (Precise Time Protocol) modules when the time of a slave clock is synchronized to the master clock. In the case of the theoretical performance analysis, we investigated 3 types of clock levels such as Crystal Oscillator (XO), TCXO (Temperature Compensated XO) and OCXO (Oven Controlled XO). From the analysis, it was observed that the synchronization performance is greatly influenced by the synchronization period and the required performance under 1 us can be achieved by using XO level clocks when the synchronization period is less than 2 seconds and the uncertainty of the propagation delay is under 100 ns. For the experiments using commercial PTP modules, the synchronization performance was investigated for direct, through 1 hub and through 2 hubs connections between the master clock and the slave clock. From the experiment results, we observed that time synchronization under 90 ns with 1,000 seconds observation interval can be achieved in the case of direct connection.

• 디지털콘텐츠학회 논문지
• /
• 제19권6호
• /
• pp.1161-1167
• /
• 2018

기계 학습의 발전은 인간만이 할 수 있었던 섬세한 작업들을 기계가 할 수 있도록 이끌었고, 이에 따라 많은 기업체들은 기계 학습 기반의 번역기를 출시하였다. 현재 상용화된 번역기들은 우수한 성능을 보이지만 숫자 번역에서 문제가 발생하는 것을 발견했다. 번역기들은번역할문장에 큰숫자가 있을경우종종숫자를잘못번역하며, 같은문장에서숫자만바꿔번역할 때문장의구조를 완전히바꾸어 번역하기도 한다. 이러한 문제점은오번역의 가능성을 높이기 때문에해결해야 될 사안으로여겨진다. 본 논문에서는 Bidirectional RNN (Recurrent Neural Network), LSTM (Long Short Term Memory networks), Attention mechanism을 적용한 Neural Machine Translation 모델을 사용하여 데이터 클렌징, 사전 크기 변경을 통한 모델 최적화를 진행 하였고, 최적화된 모델에 숫자 기호화 알고리즘을 적용하여 상기 문제점을 해결하는 번역 시스템을 구현하였다. 본논문은 데이터 클렌징 방법과 사전 크기 변경, 그리고 숫자 기호화 알고리즘에 대해 서술하였으며, BLEU score (Bilingual Evaluation Understudy score) 를 이용하여 각 모델의 성능을 비교하였다.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.97-114
• /
• 2019

This study aims to analyze the effect of urban ecosystem restoration projects by evaluating the short-term restoration performance of the project sites, from both qualitative and quantitative evaluations. In this study, for the qualitative evaluation, we derived the evaluation frame from previous studies and literature. For the quantitative evaluation, the changes in ecological connectivity after the restoration project were described using landscape permeability and network analysis. In addition, changes in habitat quality after the restoration project were evaluated by using InVEST Habitat Quality Model. These evaluations were applied to the three natural madang (ecological restoration) projects and two ecosystem conservation cooperation projects. As a result, three categories, 10 indicators, and 13 sub-indicators were derived from literature as the evaluation frame for this study. In the case of quantitative evaluation of restoration performance, habitat quality increased by 45% and ecological connectivity by 37% in natural-madang, and habitat quality by about 12% and ecological connectivity by about 19% in ecosystem conservation cooperation projects. This implies that the ecological restoration project can increase the ecological connectivity and the habitat quality of degraded sites even in a short period of time by improving the land-cover and land use. The results by applying the evaluation frame indicated that ecological and environmental factors and the ecological functions were improved by the restoration works, even though the magnitude of performances were diverse depending on the specific evaluation items, project type, and site characteristics. This study clarified that the success of ecological restoration project should be assessed by both of the short-term and long-term goals, which can be achieved by the maintenance and sustainable management, respectively.