• Journal of Game and Entertainment
• /
• v.2 no.1
• /
• pp.64-70
• /
• 2006

CAD system is a very important technology in designing many products which we are using today. This CAD technology have enlarging its area into 3D CAD systems with the development of computer graphics technologies. In particular, such advances have also been realized in special area such as the CAD system for designing shoes. 3D CAD systems for shoes design must provide compatibility between 3D and 2D data because shoes are made using 2D parts of pieces of leather or cloth. Many designers get high performances using 2D shoe CAD systems because they have had long practices with the 2D systems. Therefore, to get the mapping between 2D modeling and 3D modeling is one of very important components in 3D CAD system. In this paper, we proposed a flattening method that convert 3D shoes data to 2D data.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.279-288
• /
• 2009

The purposes of this study were to understand the differences of general characteristics, to compare understanding level of the organization cultures, and to develop more good management methods between outsourcing workers and regular workers in hospitals. Major results of this study were as follows: First, regular workers had higher level than outsourcing workers in major understanding on job satisfaction and organization cultures(pride of their jobs, recognition level of job performance ability, satisfaction on ordering method. etc.). Second, the results showed that the level of job performances related with effective management of the factors in job satisfaction and involvement. Third, through multiple regression analysis to understand factors on job satisfaction and involvement, we understood that regular workers were effected by vision performance of hospital and their value view-point, and outsourcing workers were influenced by recognition levels and education levels of hospital vision, Therefore, to maximize level of job satisfaction and involvement. we have interest in development of education program for outsourcing workers, and selection of adequate persons in hospital culture.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.328-338
• /
• 2008

Most speech recognition systems that have a large capacity and high recognition rates are isolated word speech recognition systems. In order to extend the scope of recognition, it is necessary to increase the number of words that are to be searched. However, it shows a problem that exhibits a decrease in the system performance according to the increase in the number of words. This paper defines the context information that affects speech recognition in a ubiquitous environment to solve such a problem and develops user localization method using inertial sensor and RFID. Also, we develop a new speech recognition system that demonstrates better performances than the existing system by establishing a word model domain of a speech recognition system by context information. This system shows operation without decrease of recognition rate in smart home environment.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.3
• /
• pp.722-743
• /
• 2012

Confronted with increasing global competition and rising research and development risks, the global open innovation has receiving increased attention. This study empirically investigates whether or not international cooperative R&D is effective by evaluating the quality indicators with the patents with international co-applications. The number of patents with international co-applications has dramatically increased in recent years. According to the results, the outcome from international cooperative R&D is prominent in term of all the evaluation criteria such as the number of citation, patent families, claims, and et cetera, compared with that from domestic cooperative R&D. Based on the patent quality, the information technology sector holds the top spot and high-tech sectors such as bio and automobile industries show the better quality performances. By identifying high betweeneess centrality in the network analysis of international cooperative R&D, the US is indicated as the most central country in such cooperative activity, and then Germany, the UK, Canada, and France come after.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.310-317
• /
• 2016

Lithium ion secondary battery (LISB) is an energy conversion system operated via charging-discharging cycle based on Lithium ion migration. LISB has a lot of advantages such as high energy density, low self-discharge rate, and a relatively high lifetime. Recently, increasing demands of electric vehicles have been encouraging the development of LISB with high capacity. Unfortunately, it causes some critical safety issues. It includes dendrite formation on negative electrode, resulting in electric shortage problems and battery explosion. Also, the elevated temperatures occurred during the LISB operation induces thermal shrinkage of polyolefin (e.g., polyethylene and polypropylene) separators. Consequently, the low thermal stability leads to decay of LISB performances and the reduction of lifetime. In this study, sulfonated poly (arylene ether sulfone) (SPAES) random copolymers were used as key materials to prepare polyolefin pore-filling separator. The resulting separators were evaluated in the term of metal ion chelation capability associated with dendrite formation, $Li^+$ ion conductivity and thermal durability.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.19-27
• /
• 1998

The Transmitter part of single RF transceiver chip for an extended GSM handset application was circuit-designed, fabricated adn evaluated. The RF-IC Chip was processed by 0.8${\mu}m$ Si BiCMOS, 80 pin TQFP of $10 {\times} 10mm$ size, 3.3V operated RF-IC reveals, in general, quite reasonable integrity and RF performances. This paper describes development resuts of RF transmitter section, which includes IF/RF up-conversion mixer, IF/RF polyphase and pre-amplifier. The test results show that RF transmitter section is well operated within frequency range of 880~915MHz, which is defined on the extended GSM(E-GSM) specification. The transmitter section also reveals moderate power consumption of 71mA and total output power of 8.2dBm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.6
• /
• pp.16-21
• /
• 1979

Two dimensional kernels which reconstruct a tomographic image from a blurred one formed by simple back-projection are investigated in the frequency domain and their performances are compared. The kernels are derived from a point spread function of the tomographic system and have the form of a ramp filter modified by several window functions to suppress ringings or artifacts in the reconstruction. Computer simulation using computer-generated phantom image data with different filter functions has been carried out. In this simulation, it is found that the computation time for 2-D reconstruction is much less than that of 1-D convolution method by a factor of ten or more whereas the reconstructed image quality of the former is far poorer than the latter. In 2-D reconstruction heavy windowing results in less noisy reconstruction but details smear out in this case. The trade-offs between these points are considered.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.10-17
• /
• 2014

This paper presents an analytical method for finding the optimum transmission range in mobile ad hoc networks(MANETs). The results are particularly useful for the operation of military networks, as the transmission range affects the traffic throughput of user & routing traffic, delay, and frequency interference. When the conditions of tactical environment are applied in our simulations and the above-mentioned performances are analyzed, we find the OLSR protocol is more excellent. Plus, we compare the results of MANETs performance when applying optimum transmission range and the default transmission range(10km), and analyze the reasonability of the calculation of optimum transmission range proposed by this paper.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.23-35
• /
• 2017

Work zone traffic control is of keen interest because both traffic operations and safety performances are directly affected by traffic management methods. In particular, work zone traffic on two-lane roads needs to be managed in more efficient and safer manners due to its unique characteristics of alternative right-of-way assignment. This study developed a dynamic control algorithm that can be used for real-time operations of two-lane work zone traffic. The performance of the developed algorithm was evaluated by VISSIM microscopic traffic simulator. An applied programming interface (API) based program was developed to plug-in the control algorithm onto the simulator. The results demonstrated the feasibility of the proposed control algorithm for two-lane work zone.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.4
• /
• pp.300-308
• /
• 2009

In a pursuit of the development of alternative mobile power sources with a high energy density, a planar and air-breathing PEMFCs with a new type of hydrogen cartridge which uses onsite $H_2$ generated from sodium borohydride ($NaBH_4$) hydrolysis have been investigated for use in advanced power systems. Two types of $H_2$ generation through $NaBH_4$ hydrolysis are available: (1) using organic acids such as sulphuric acid, malic acid, and sodium hydrogen carbonate in aqueous solution with solid $NaBH_4$ and (2) using solid selected catalysts such as Pt, Ru, CoB into the stabilized alkaline $NaBH_4$ solution. It might therefore be relevant at this stage to evaluate the relative competitiveness of the two methods mentioned above. The effects of flow rate of stabilized $NaBH_4$ solution, MEA (Membrane Electrode Assembly) improvement, and type and flow control of the catalytic acidic solution have been studied and the cell performances of the planar, air-breathing PEMFCs using $NaBH_4$ has been measured from aspects of power density, fuel efficiency, energy density, and fast response of cell. In our experiments, planar, air-breathing PEMFCs using $NaBH_4$ achieved to maximum power density of 128mW/$cm^2$ at 0.7V and energy efficiency of 46% and has many advantages such as low operating temperature, sustained operation at a high power density, compactness, the potential for low cost and volume, long stack life, fast star-up and suitability for discontinuous operation.