Korea's national income statistics have been compiled by the Bank of Korea since 1953. However, there is a break in the time series. The current time series (1970 onward) is based on the '1993 SNA (System of National Accounts)' suggested by the UN, and the previous time series (1953~1970) was based on the '1953 SNA'. The difference between the previous and current time series is 4.8% in 1970 when the two series overlap. The difference is even greater in terms of comparisons across industries. In addition, it has now become even more difficult to connect the current and the previous time series because, in 2009, the Bank of Korea introduced a chain weighted method for calculating the current time series (1970 onward). Under the chain weighted method, the time series underwent substantial modification; for instance, the economic growth rate during 1970~2005 is 0.9%p higher than the rate under the general method. This paper applies chain weighted values and the '1993 SNA' to the previous time series (1953~1970) by utilizing various national account manuals published by the UN and previous Korean input-output tables in order to calculate a long term time series from 1953 to 2010 based on the same criteria as the current time series (1970 onward). In the revised time series, it appears that 1953 GDP at current basic prices is 3.5% higher and the growth rate for the period of 1953~1970 is 1.5%p higher each year than under the previous time series. Under the revised time series the size of the Korean economy as of 2010 is 50-fold bigger than that of 1953. In terms of industries, manufacturing and SOC show significant expansion whereas the extent of that of the service industry is relatively small.
Journal of the Korea Academia-Industrial cooperation Society
/
v.9
no.6
/
pp.1754-1759
/
2008
To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.
The Journal of Korean Institute of Communications and Information Sciences
/
v.30
no.2B
/
pp.36-43
/
2005
This paper suggests a method to effectively apply an application model of fuzzy-neural network to the optimal load distribution algorithm, considering the complication and non-linearity of the web server environment. We use the clustering web server in the linux system and it consists of a load balancer that distributes the network loads and some of real servers that processes the load and responses to the client. The previous works considered only with the scrappy decision information such as the connections. That is, since the distribution algorithm depends on the input of the whole network throughput, it was proved inefficient in terms of performance improvement of the web server. With the proposed algorithm, it monitors the whole states of both network input and output. Then, it infers CPU and memory states of each real server and effectively distributes the requests of the clients. In this paper, the proposed model is compared with the previous method through simulations and we analysis the results to develop the optimal and intelligent load balancing model.
Greenhouse gas (GHG) emission from agricultural lands is recognized as one of important factors of global warming. The objective of this short communication was to evaluate the applicability of different soil GHG emission prediction models on agricultural systems in Korea. Four models, namely, DNDC, DAYCENT, EXPERT-N and COUP, were selected and the basic structure (e.g., components and sub-model), input variables, and output variables were compared. In particular, the availability and compilation of essential input variables were assessed. Major input variables needed for operating these predictive models were found to be available through database systems established by national organizations such as the Korea Meteorological Administration, the Korean Soil Information System, and the Rural Development Administration. However, in order to apply these models in Korea, it was necessary to calibrate and validate each of the models for the domestic landscape settings and climate conditions. In addition, field data of long-term monitoring of GHG emission from agricultural lands are limited and therefore should be measured.
From game consoles to TV and Hollywood films, 3D rendering technology is involved in various fields. Up until the late 90s, the computer image rendering method was rasterization that mainly used Phong Shading, and up until recently it was the go-to method for movies and film animation. In the 21st century, the quality provided by Ray Tracing and the development of Global Illumination was much more realistic and thus became popularized. However, despite its growing use in architectural rendering to the markets, Global Illumination in film animation and movies was limited due to its long render time. So, in this thesis, if one were to take the concept from each rendering method and consider it from a mathematical perspective, one could adapt the Ambient Occlusion's equation to the illumination loop equation used in rasterization. This algorithm modification has the capability to reflect the lighting of a diverse array of colors, like in Global Illumination, with a fast render time, as in rasterization, and the example RenderMan Shader is based upon this new algorithm. In conclusion, with Global Illumination's naturalistic lighting and rasterization's rendering speed, the combination of the best points of each is a new method with a short rendering time while producing good quality. I hope animations and films can benefit from this algorithm by the reduction of budget with an overall better quality output in VFX production.
We have developed a prototype patient monitoring system including module-based bedside units, interbed network, and central stations. A bedside unit consists of a color monitor and a main CPU unit with peripherals including a module controller. It can also include up to 3 module cases and 21 different modules. In addition to the 3-channel recorder module, six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmogaph are provided as parameter modules. Modules and a module controller communicate with up to 1Mbps data rate through an intrabed network based on RS-485 and HDLC protocol. Bedside units can display up to 12 channels of waveforms with any related numeric informations simultaneously. At the same time, it communicates with other bedside units and central stations through interbed network based on 10Mbps Ethernet and TCP/IP protocol. Software far bedside units and central stations fully utilizes gaphical user interface techniques and all functions are controlled by a rotate/push button on bedside unit and a mouse on central station. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances. In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we are developing a relational database server dedicated to the patient monitoring system. We are also developing a clinical workstation with which physicians can review and examine the data from patients through various kinds of computer networks far diagnosis and report generation. Portable bedside units with LCD display and wired or wireless data communication capability will be developed in the near future. New parameter modules including cardiac output, capnograph, and other gas analysis functions will be added.
In this study, the system for application of the bone stimulation was implemented using high frequency and low strain method. The whole system consists of the high frequency and low strain vibration stimulation system 177 for stimulating bone, LVDT sensor, and wireless sensor based on tri-axial accelerometer. To evaluate the usefulness of the system, the frequencies and accelerations from function generator were applied to the vibration stimulation system. The range of frequency was 17 Hz, 30 Hz, 45 Hz, 50 Hz and the range of acceleration was set 0.3 g, 0.6 g, 1g, and 2 g. The measured frequencies and acceleration using LVDT (linear variable difference transformer) sensor and 3-axial accelerometer were estimated and compared. The range of frequencies average difference was from 0.0 to 0.004 Hz. As the standard deviation of frequencies estimated by LVDT sensor and accelerometer was below 0.03 Hz and the output frequencies of function generator were similar: Also the results of t-test were satisfied with conditions of p > 0.05. And the acquired frequencies and acceleration from vibration measuring device module were estimated and analyzed. As the mean of accelerations was similar to the acceleration applied from function generator. And the standard deviation of acceleration estimated from vibration measuring device module was ranged from 0.019 g to 0.038 g. Also the results of t-test were satisfied with conditions of p > 0.05. Therefore, these results were airy similar to the acceleration applied from function generator. As a result, the usefulness of the system was confirmed. n a further study, clinical experiment will be carried out with the authorization of IRB (institutional review board) so that appropriate frequency and strain would be investigated in clinical field.
Basic research have contributed to technological growth or economic growth in U.S. Specially recent studies say that universities also contribute to economic development through scientific activities like science research, education, technology transfers. But we can not assure whether scientific knowledge was connected to real technology or economic performance, and it is difficult to figure out the effect of scientific output. "What is the exact performance of scientific knowledge?" It is still obscure. In this context, this paper analyzes characteristics of the linkage of science and technology. Data are U.S. R&D expenditure, scientific articles, citation of articles in U.S. patents by fields and sectors. As a result, university sector has the most weight of the linkage of science and technology. But, in relative connection rate analysis, industrial sector's is stronger than any other sectors. In the field analysis, linkage of science and technology is very strong in Chemistry, Physics, Biological sciences fields. And recently the linkage was increased in the fields of Computer science, Agricultural science, Engineering. Finally, this paper supports funding policy or estimation policy of government to product of scientific knowledge. University sector is still important because it has the most weight of the linkage. Scientific knowledge of industrial sector is also important. The connection rate of industrial science is the strongest in all sectors. And this research classify the R&D type by science fields. Considering the differences of science fields is needed to product science knowledge effectively.
An, Young-jun;Hur, Min-goo;Yang, Seung-dae;Shin, Dae-seob;Lee, Dong-hoon
Journal of the Korea Institute of Information and Communication Engineering
/
v.19
no.11
/
pp.2689-2696
/
2015
Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.5
/
pp.153-163
/
2016
Intellectual output, such as research papers and patents, has increased due to the consistent investment of the government R&D budget, however, the economical outcome leaves much to be desired. These unsatisfactory results originate from the lack of information sharing about the technology's business compatibility and enterprise's business capability between technology supplier and technology user. This study aims at investigating the decision making process of technology commercialization by proposing an assessment model of the technology's business compatibility and enterprise's business capability. The assessment model was completed by selecting the key index through a literature survey, field survey and consultation with experts. The technology assessment model can be effectively utilized for technology licensing, technology start-up and technology selection in R&BD projects. However, the assessment indexes required for the basic science are not investigated in this study and some assessment indexes are differently interpreted by the individual appraisers. The assessment model will be improved through field application and additional studies will be conducted to develop the assessment model of basic science.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.