• 한국동물생명공학회지
• /
• 제39권2호
• /
• pp.121-130
• /
• 2024

Background: This study focused on reproductive traits in Hanwoo cattle, specifically the environmental factors affecting gestation length and birth weight. Methods: The records of 1,540 cows calved at the Hanwoo Research Institute from 2015 to 2023 were examined. This study analyzed two populations, line-breeding Hanwoo (LBH) and general Hanwoo (GH), with all cows undergoing estrus synchronization and artificial insemination. The R software was used to compare the differences between the two populations and analyze the environmental factors affecting each trait. Results: The results showed that the average gestation length for LBH was 283.28 ± 5.93 days, which was significantly shorter than that of the GH, which had an average of 285.63 ± 6.21 days (p < 0.001). The average birth weight of LBH calves was 25.10 ± 3.69 kg, significantly lighter than GH calves, which weighed 27.26 ± 4.11 kg on average (p < 0.001). Analysis of environmental factors revealed significant differences in the gestation length of LBH based on dam parity, year, and season of calving. However, no significant differences were observed based on calf sex. For LBH, birth weight showed significant differences based on dam parity, year of calving, and sex of the calf, but not the season of calving. In GH, gestation length varied with dam parity and calving season, but not with calving year or calf sex. The GH birth weight showed differences based on dam parity, year of calving, and calf sex, but not the season of calving. Conclusions: Reproductive traits in the Hanwoo cattle industry are economically vital but are heavily influenced by environmental factors due to their low heritability. An accurate evaluation of the genetic potential of these traits requires an analysis of the environmental factors affecting them. The results of this study serve as foundational data for predicting the potential for genetic improvement in the gestation length and birth weight of Hanwoo cattle.

• 한국건설관리학회논문집
• /
• 제24권5호
• /
• pp.83-94
• /
• 2023

In order to devise a rebar usage optimization algorithm, it is necessary to calculate the exact rebar length and revise the arrangement of rebars into special lengths. However, the process of rearranging numerous rebars and manually calculating their quantities is time-consuming and requires significant human resources. To address this challenge, it is necessary to develop an algorithm that can automatically estimate the length of rebars and calculate their quantities. This study aims to create an automatic estimation algorithm that improves work efficiency while ensuring accurate and reliable calculations of rebar quantities. The algorithm considers various factors such as concrete cover, hook length, development length, and lapping length, mandated by the building codes, to calculate the quantity of rebars for wall structures. The effectiveness of the proposed method is validated by comparing the rebar quantities generated by the algorithm with manually calculated quantities, resulting in a difference rate of 1.14% for the hook case and 1.37% for the U-bar case. The implementation of this method enables fast and precise estimation of rebar quantities, adhering to relevant regulatory codes.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.48-52
• /
• 2006

This study is a research of safety valve development for LP gas cylinder which use sintering metal. Re-searcher wishes to apply technology of sintering metal for safety valve development and do gas flow control. The basis of this study is most suitable fluid examination that to reduce gas accident. This research concluded following results. 1. When press pin length is 42mm to 45mm powder quantity is 0.25g, in case of press pin length 36mm to 42mm powder quantity is 0.2g, displayed fluid optimization. 2. When press pin length is 39mm and powder quantity is 0.25g, press pressure displayed fluid optimization at all interests from $1.2\;tons/cm^{2}\;to\;2\;tons/cm^{2}$. 3. When apparent density is about $5.0g/cm^{3}\;to\;4.5g/cm^{3}$, fluid optimization becomes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.454-457
• /
• 2006

This study presents a strut-and-tie model for the development of headed bars in an exterior beam-column joint with transverse reinforcements. The tensile force of a headed bar is considered to be developed by head bearing together with bond along a bonded length as a partial embedment length. The model requires construction of struts with biaxially compressed nodal zones for head bearing and fan-shaped stress fields against neighboring nodal zones for bond stresses along the bonded length. Due to the existence of transverse reinforcements, the fan-shaped stress fields are divided into direct and indirect fan-shaped stress fields. A required development length and head size of a headed bar can be optimally designed by adjusting a proportion between a bond contribution and bearing contribution.

• 대한한의학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2003

Purpose : Nowadays, there are many studies of growth retardation treatment by oriental medical therapy. This study was performed to evaluate the effect of Hwalhyulsungjang-san (Huoxuechengzhang-san) and KC101 on physical development in growth, Methods : 60 young (3 weeks old) male rats, whose mean weight was $46.8{\pm}0,7g$, were divided into 5 groups : groups A, B, C, and D were fed an experimental diet containing respectively Hwalhyulsungjang-san 2.5%, Hwalhyulsungjang-san 7.5%, KC101 5.0%, and KC101 10.0%, and the other group were fed an AIN-diet containing neither Hwalhyulsungjang-san nor KC101 as a control. Study of each group used 2 rats and was repeated in 6 times. Body weight, daily weight gain, dietary intake, body length, femur length, backbone length and serum concentration of IGF-I and hemoglobin were measured. Result : 1. Body weight and daily weight gain of group D (KC101 10%) were highest; dietary intake of group D was also increased by 13% over the control group. 2. Average body length of group D was increased to 1.69cm, which was 3.2% over the control group. Backbone length of group D was also increased 4% compared to control group. 3. Serum concentration of IGF-I of group D increased 17% compared to control group. 4. Serum concentration of hemoglobin of group B (Hwalhyulsungjang-san 7.5%) increased 8% compared to control group. Conclusion : This study showed that Hwalhyulsungjang-san and KC101 composed of oriental medicinal stuffs have effect on physical development in growing rats. There were not any statistical meaning compared to control group, but this study suggests that intake of these compounds from a young age may lead to increase physical development in growth.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.859-862
• /
• 2008

본 연구는 GFRP 보강근의 정착길이 산정식을 제안하는 것이다. 정착길이 산정식을 제안하기 위해 인발실험을 실시하였다. 실험변수는 묻힘길이, 피복두께, 보강근 직경, 보강근 종류이다. 묻힘길이는 15d$_b$, 30d$_b$, 45d$_b$로 하고, 순 피복두께는 0.5d$_b$, 1.0d$_b$, 1.5d$_b$, 및 2.0d$_b$로 계획하였다. 사용된 보강근은 모두 3종류(국내 2종, 국외 1종)이고 보강근 크기는 D10, D13, D16이다. 실험은 겹침이음된 GFRP 보강근 양 단부를 동시에 인발하여 최종파괴에 도달될 때까지 GFRP 보강근에 하중을 가력하였다. 인발실험을 통해 얻은 결과를 토대로 각 변수에 따른 GFRP 보강근의 부착특성 및 평균부착응력을 산정하였으며, 실험체중 쪼갬파괴된 실험체만을 선택하여 회귀분석을 통해 정착길이 산정식은 제안하였고 ACI 440.1R-06에 제안하고 있는 식과 비교하였다. 본 연구를 통해 제안된 회귀분석에 의한 제안식을 근거로 겹침이음된 GFRP 보강근을 이용한 휨 설계가 가능할 것으로 판단된다.

• 한국작물학회지
• /
• 제44권1호
• /
• pp.86-94
• /
• 1999

A set of rice recombinant inbred lines was developed from a cross between a Tongil type variety, Nonganbyeo, and an indica variety, BG276, by the single seed descent method. The number of the lines in the population was 272. All the agronomic characters studied except ADV (alkali-digestion value) showed continuous variation among the RILs, implying that their inheritance mode should be quantitative. The patterns of the variation in the RILs were either normal or skewed distribution. ADVs of RILs were segregated into two groups with 1:1 ratio, indicating that ADVs in this KIL population might be controlled by one major gene. Transgressive variations were also observed in all characters. Heritability values of the characters varied from 0.488 in brown/rough rice ratio to 0.895 in alkali-digestion value. In the analysis of genotypic and phenotypic correlations, the character of yield was positively correlated with 8 different agronomic characters. The number of panicles per hill was negatively correlated with culm length, panicle length, and number of spikelets per panicle. Grain length was positively correlated with grain width, grain thickness, grain length/width ratio, white belly, ADV, and amylose. However, grain length/width ratio was negatively correlated with grain width. White core was also negatively correlated with white belly and ADV.

• Fisheries and Aquatic Sciences
• /
• 제10권1호
• /
• pp.30-36
• /
• 2007

We present age and growth data for Ilisha elongata, based on 363 specimens caught in 1999 and 2000 around Jeju Island and the southwest coast of Korea. Scale and ring radii of each ring group showed a direct one-to-one relationship, with ring radius increasing as scale radius increased. The relationship between fork length and scale radius was FL=39.553SR+60.935 for females, FL=39.474SR+54.026 for males, and FL=39.608SR+57.547 for both sexes. Monthly changes in the marginal index indicated that a new ring appears once each year (in July). Maximum age, mean age and mean fork length of fish were 10 years, 5.0 years, and 349mm, respectively. Von Bertalanffy's growth equations were $FL_t=495.4{\times}[1-\exp(-0.2586(t+0.6487))]$ for fork length (mm) and $W_t=1,112.5{\times}[1-\exp(-0.2586(t+0.6487))]^{2.874}$ for body weight (g) for both sexes. Monthly changes in the gonadosomatic index (GSI) indicated that the spawning period was in June and July, which corresponded closely with ring formation time. Differences in monthly GSI changes in 1999 and 2000 may be related to water temperature variation. Fecundity ranged from 5,664 to 176,290 eggs per individual (n=43, fork length 264-470mm). The relationship between fecundity(F) and fork length was $F=7.7{\times}10^{-7}{\times}FL^{4.9269}$.

• Fisheries and Aquatic Sciences
• /
• 제17권4호
• /
• pp.491-496
• /
• 2014

A total of six specimens (57.03-100.72 mm in standard length) belonging to the family Diodontidae were collected around Jeju Island, Korea between July and August 2013. On the Basis of morphological and molecular analyses, we identified the specimens as Cyclichthys orbicularis (Bloch, 1785), a new record to the Korean fish fauna. Morphologically, the species is characterized by nine caudal fin rays, immovable spines on the head and body except the caudal peduncle, and small black spots dorsally. Some morphometric characters changed disproportionately with growth, which was a new finding. Caudal peduncle length, body width and preanus length to standard length tend to grow at a rate different from that of overall growth. When the 601 base pairs of mitochondrial DNA cytochrome c oxidase subunit I sequences of our specimens were compared with those of other diodontid fishes, our specimens clustered tightly around C. orbicularis (d = 0.000-0.002) in an NJ tree, with a high bootstrap value (99%). We herein describe the morphological and molecular traits of the specimens, and propose a new Korean name, "gud-ga-si-bok-sok" for the genus Cyclichthys, and "dung-geun-gud-ga-si-bok" for C. orbicularis.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.861-869
• /
• 1986

본 연구에서는 동시확립문제의 속도장해석에 있어서 단면내의 속도분포에 대 한 일체의 가정을 하지 않고 운동량방정식을 직접 해석하여 단면내의 속도분포를 구하 였다. 또한 Prandtl수, 반경비 및 편심도가 열전달특성에 미치는 영향에 대한 해석 도 수행하였다.