• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.122-130
• /
• 2013

This work proposes a 12b 100MS/s 45nm CMOS four-step pipeline ADC for high-speed digital communication systems requiring high resolution, low power, and small size. The input SHA employs a gate-bootstrapping circuit to sample wide-band input signals with an accuracy of 12 bits or more. The input SHA and MDACs adopt two-stage op-amps with a gain-boosting technique to achieve the required DC gain and high signal swing range. In addition, cascode and Miller frequency-compensation techniques are selectively used for wide bandwidth and stable signal settling. The cascode current mirror minimizes current mismatch by channel length modulation and supply variation. The finger width of current mirrors and amplifiers is laid out in the same size to reduce device mismatch. The proposed supply- and temperature-insensitive current and voltage references are implemented on chip with optional off-chip reference voltages for various system applications. The prototype ADC in a 45nm CMOS demonstrates the measured DNL and INL within 0.88LSB and 1.46LSB, respectively. The ADC shows a maximum SNDR of 61.0dB and a maximum SFDR of 74.9dB at 100MS/s, respectively. The ADC with an active die area of $0.43mm^2$ consumes 29.8mW at 100MS/s and a 1.1V supply.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2007

The morphology of gonad and reproductive cycle of ribbed gunnel (Dictyosoma burgeri) were investigated on the basis of histological observation. The specimens were monthly sampled in the coastal waters of Jeju from November 2001 to February 2003. The ovaries and testis of this species are categorized as cystovarian and lobule type, respectively. The gonadosomatic index (GSI) of female increased in November and maintained high values from December to February. The GSI of male was similar to that of female although it was decreased in February. The reproductive cycle can be grouped into the following successive stage in the ovary: growth (October to November), mature (November to February), spawning (January to February), and degenerating and recovery (March to September). And in the testis, the stage observed were: multiplication (August to November), growth (November to January), mature and spawning (November to February), and degenerating and recovery (January to September). The minimum maturation size of D. burgeri was over 15.0 cm and fecundity ranged from 2,194 to 6,581 eggs. The relationship between the fecundity and fish body was calculated in the fecundity (F) equation as: $F=0.4057TL^{3.1425}$ ($R^2=0.7621$) for total length (TL); $F=149.88BW^{0.9579}$ ($R^2=0.7982$) for body weight (BW), respectively. The fecundity was correlated positively with TL and BW. The histological observations of the gonads suggested that major spawning of this species probably occurs between January to February, when low water temperature ($13{\pm}0.3^{\circ}C$) period.

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.131-139
• /
• 2011

Bisphenol A (BPA) is mainly used in the production of epoxy resins and polycarbonate plastics, which is a known endocrine disruptor and acutely toxic to aquatic organisms. In this study, estrogenic effect of BPA was investigated on hybrid between Oryzias dancena and O. javanicus (ODJ). ODJ were exposed to BPA of various concentrations (eg. 2.5 mg/L, 5.0 mg/L and 10.0 mg/L) for 56 days. The growth rate, abnormality and the ratio of female and male were observed in test group and control group. As a result, the growth was $14.7{\pm}2.0$ mm in total length (TL) in 2.5 mg/L, $13.7{\pm}2.5$ mm in 5.0 mg/L, $12.8{\pm}2.5$ mm in 10.0 mg/L in test group while it was $18.0{\pm}1.2$ mm in TL in control group which was not treated with bisphenol A. The result showed that the growth decreased as the concentration of BPA increased. The abnormality rate was 13.6% in control group, 65.4% in 2.5 mg/L, 81.3% in 5.0 mg/L and 98.1 % in 10.0 mg/L which showed increase in abnormality as an increase of BPA concentration. As a result of analyzing ratio of sex in the test group and control group, 6.0% was examined to be interspecific in controls, 76.9% in 2.5 mg/L and 100.0% in 5.0 mg/L and 10.0 mg/L. In conclusion, these results suggest that BPA has estrogenic effect on ODJ.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.1
• /
• pp.39-46
• /
• 2005

Background : Even though it has been suggested that low-colony, scotochromogen nontuberculous mycobacteria (NTM) are usually contaminants and not true pathogens, evidence for this hypothesis has not been provided. This study investigated the colony characteristics, organism identification, and clinical significance of low-colony scotochromogen. Methods : The laboratory cultured 6,898 respiratory clinical specimens for an examination of mycobacteria over a three-month period. A low-colony count was arbitrarily defined as ${\leq}20$ colonies. This study analyzed the recovery rate of the mycobacteria, the number of colonies and their gross characteristics, and their clinical significance. PCR-restriction fragment length polymorphism analysis was carried out to identify the NTM species. NTM pulmonary disease was defined according to the American Thoracic Society. Results : A total of 6,898 respiratory specimens for mycobacterium were cultured. Of these, 263 (3.8%) grew NTM, and 382 (5.5%) grew M. tuberculosis. Of the 263 cultured NTM specimens, 124 (47.1%) were scotochromogens. The smear-positive rate was significantly lower in these scotochromogens (4.8%) than in the non-scotochromogens (23.7%) (p<0.05). The most common isolates were M. gordonae (83/102, 81.4%) in the scotochromogens, and MAC (52/121, 43.0%) in the non-scotochromogens. Even though three out of 113 patients with a low-colony scotochromogen has been diagnosed with NTM pulmonary disease, the isolated scotochromogen was not considered to be the cause of the NTM disease but was just a contaminant. Conclusion : In this study, the most common isolate of a low-colony count scotochromogen was M. gordonae, which appeared to be contaminants and not true pathogens. Greater efforts in the quality control of a mycobacterium laboratory are needed in cases where there is a high recovery rate of low-colony count scotochromogen.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.1-24
• /
• 1974

A national programme of erosion control for soil and water conservation needs to be based on factual information about rates and quantities of soil erosion and of water runoff. The best and simplest way of reducing sedimentation pollution is to prevent or control the erosion at its sources. Steeply sloping earth banks are liable to both surface erosion and land-slides and the key to the control of these form of erosion lies with drainages and dense vegetation establishment including surface mulching on the slopes. Micro-plots having $1.6m^2$ (1 metre in width and 1.6 metres in slope length, and 1:1.2 in gradient) of banking slopes on the coarse sand soil are used to establish the order of magnititude of the difference in controlling of soil erosion and water runoff, and in potentiality of execution in consideration of the values of landscapes, performed on the 2 repetetions of six-experiment plots consisted of five surface mulches including seedings and one bare slope as a control treatment. The main results obtained may be summarized as follows: 1. The significant difference is realized in the quantities of soil erosion between the measures of six treatments. 2. Excepting the differences between treatment III and VI, the significant difference is realized in the rate of surface runoff between each treatment measures. 3. Both measures of treatment II and IV are recognized as the most effective measures in controlling the soil erosion and water runoff and also in establishing the ground vegetation. (Treatment II is a measures of the coarse straw-mat mulchings on the micro-strip seedings, Treatment IV is a measures of the "SPRAY-ON method" on the micro-strip seedings). In consideration of the potentiality of execution as well as the value of landscapes, the measures of treatment II could be recommendable for establishing the vegetation cover on the denuded gentle slopes in hillsides while the measures of treatment IV could be suitable for accelerating the establishment of vegetation on steeply sloping earth banks and cuts.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.96-105
• /
• 2007

A pair of maroon clownfishes with an indonesian native, reared in recirculation culture system to develope its aquaculture techniques. Courtship, spawning behavior, egg developments and rearing of the maroon clownfish larvae were documented. The larval development were described with illustrative figures. The spawning was occurred 8 times between Feburary and August 2004. The gravid female spawned during 15:00-20:00. The male mainly took care of the eggs supplying oxygen by water currents using their pectoral fins, anal fin and mouth. The fertilized eggs were separative-adhesive and oval in shape, and $1.99{\pm}0.03\;mm$ in longer diameter and $0.88{\pm}0.03\;mm$ in shorter diameter. The fertilized eggs were in deep-orange color. Cleavage occurred in 30 minutes after fertilization, and the egg reached 2 cells stage in 1 hour 10 minutes after fertilization at $27.0^{\circ}{\pm}0.5^{\circ}C$. The embryo was formed in 23 hours 40 minutes after fertilization. Hatching began in between $120{\pm}2$ hours and $150{\pm}12$ hours after fertilization at $27.0^{\circ}C$ in the incubator. Total length (TL) of the newly hatched larvae was 3.22 mm with mouth and anus opened. Ten days after hatching, mean TL of the larvae were 6.21 mm with 28 dorsal fin rays, 17 anal fin rays and 28 caudal fin rays. Nineteen days after hatching, mean TL of the larvae were 9.34 mm. At this stage the larva had three white bands on the body, and they began to feed on commercial diet.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.9-15
• /
• 2010

This study was conducted to develop a stand growth model and a stand yield table for Eucalyptus pellita and Acacia mangium plantations in Kalimantan, Indonesia. To develop a stand growth model, Weibull robability density function, a diameter class model, was applied in this study. In the development of stand growth model by site index and stand age, a hierarchy is generally required - estimation, recovery and prediction of the diameter class model. A number of grow equations were also involved in each process to estimate diameter, height, basal area, minimum or maximum diameter. To examine whether the grow equations are adequate for Eucalyptus pellita or Acacia mangium plantations, a fitness index was analyzed for each equation. The results showed that fitness indices were ranged from 65 to 89% for Eucalyptus pellita plantations and from 72 to 95% for Acacia mangium plantations. As being highly adequate for the plantations, a stand yield table was developed based on the resulted growth model, and applied to estimate the stand growth with midium site index for 10-year period. The highest annual stand growth of Eucalyptus pellita plantations was estimated to be 21.25 $m^3$/ha, while that of Acacia mangium plantations was 27.5 $m^3$/ha. In terms of annual stand growth, Acacia mangium plantations appeared to be more beneficial than Eucalyptus pellita plantations. Also, to estimate commercial timber volume available from the plantations, an assumption that a log would be cut by 2.7 m in length and the rest of the log would be cut by 1.5m was involved. The commercial timber volume available from Eucalyptus pellita plantations was 68.0 $m^3$/ha, 33% from the total stand volume, 203.2 $m^3$/ha. Also 96.7 $m^3$/ha of commercial timbers were available from Acacia mangium plantations, which was 42% from the 232.9 $m^3$/ha in total. Presenting a good information about the stand growth in Eucalyptus pellita and Acacia mangium plantations, this study might be useful for whom proceeds or considers an abroad plantation for merchantable timber production or carbon credit in tropical regions.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.30-38
• /
• 2004

Purpose: To develop a whole body frame for the purpose of reducing patient motion and minimizing setup error for extra-cranial stereotactic radiotherapy, and to evaluate the repositioning setup error of a patient in the frame. Materials and Methods: The developed whole body frame is composed of a base plate, immobilizer, vacuum cushion, ruler and belts. The dimension of the base plate is 130 cm in length, 50 cm in width and 1 cm in thickness. The material used in the base plate of the frame was bakelite and the immobilizer was made of acetal. In addition, Radiopaque angio-catheter wires were engraved on the base plate for a coordinate system to determine the target localization. The measurement for radiation transmission and target localization is peformed in order to test the utilization of the frame. Also, a Matlab program analyzed the patients setup error by using the patient's setup images obtained from a CCTV camera and digital record recorder (DVR). Results: A frame that is useful for CT simulation and radiation treatment was fabricated. The frame structure was designed to minimize collisions from the changes in the rotation angle of the gantry and to maximize the transmission rate of the Incident radiation at the lateral or posterior oblique direction. The lightening belts may be used for the further reduction of the patient motion, and the belts can be adjusted so that they are not in the way of beam direction. The radiation transmission rates of this frame were measured as 95% and 96% at 10 and 21 MV, respectively. The position of a test target on the skin of a volunteer is accurately determined by CT simulation using the coordinate system in the frame. The estimated setup errors by Matlab program are shown 3.69$\pm$1.60, 2.14$\pm$0.78 mm at the lateral and central chest, and 7.11 $\pm$2.10, 6.54$\pm$2.22 mm at lateral and central abdomen, respectively. The setup error due to the lateral motion of breast is shown as 6.33$\pm$ 1.55 mm. Conclusion: The development and test of a whole body frame has proven very useful and practical in the radiosurgery for extra-cranial cancers. It may be used in determining target localization, and it can be used as a patient immobilization tool. More experimental data should be obtained in order to improve and confirm the results of the patient setup error.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.424-431
• /
• 2017

This study was conducted to set the optimum nutrient solution concentration by growth stage for new strawberry cultivars 'Berrystar' and 'Jukhyang'(Fragaria ${\times}$ ananassa Duch. cvs. 'Berrystar', 'Jukhyang') grown through hydroponics to improve the quality and yield. Three different EC levels were applied to the nutrient solution. The treatment levels were 0.7, 1.0 and 1.3 times higher than the nutrient concentration standard for 'Seolhyang' based on the 'Manual for strawberry cultivation' of Rural Development Administration. Based on the results, there were no significant differences in growth of 'Berrystar' by EC level. 'Jukhyang' showed the most vigorous growth grown in 1.3 times higher nutrient concentration. While the growth of 'Berrystar' and 'Jukhyang' grown in higher EC level has leaves with more chlorophyll concentration. However the quantum yield of leaves was not affected by the treatments. On the treatment with 1.3 times higher EC level, the weight, length, width and firmness of 'Berrystar' and 'Jukhyang' were significantly high. The sugar contents of the harvest analyzed by HPLC did not differed particularly, but the percentage composition of reducing sugar and non-reducing sugar were presented differently depending on the treatments. Marketable fruit yield increased as nutrient concentration increases. However, there were no large differences by treatments. Meanwhile, 'Jukhyang' showed significant difference by nutrient concentration and had the largest yield for a treatment grown in 1.3 times higher EC level. Based on these results, it is recommended to provide the same nutrient solution concentration level to the nutrient concentration standard of 'Seolhyang' for 'Berrystar', and the 1.3 times higher level for 'Jukhyang'.

• Journal of Mushroom
• /
• v.13 no.4
• /
• pp.314-318
• /
• 2015

This study was carried out to investigated the avaiability of dried Koojongsi persimmon peels (KPP) as a useful mushroom medium using Pleurotus eryngii ASI 2312. Mushroom cultivation medium used in this study was mixed with medium mixture, corn cob and sawdust (220:65:15, v/v). Dried KPP was replaced mushroom cultivation medium (control) with 5, 10, 15, 20, 30, 40, 50% dried KPP. The T-N content of dried KPP treatments decreased to increase replaced ratio of the dried KPP and C/N ratio was increased to increase replaced ratio of the dried KPP. But T-C content of dried KPP treatments was similar to untreated control. The average cultivating periods of mycelium on dried KPP treatments was delayed to increase replaced ratio of the dried KPP and cultivating periods was delayed over 30% dried KPP treatments. The length of stipe of dried KPP treatments was longer than that of the untreated control to increase replaced ratio of the dried KPP and thickness of stipes was tend to be thinner than that of the untreated control to increase replaced ratio of the dried KPP. The moisture, carbohydrate, crude protein and crude ash content of mycelial were similar to untreated control, but crude fatty acid was increased to increase replaced ratio of the dried KPP. The ${\beta}-glucan$ content of 10% and 15% treatments were higher than untreatment control. The results based on cultivation yield and ${\beta}-glucan$ content indicated that optimal mixture ratio dried KPP was 15%.