• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1380-1390
• /
• 1997

This paper presents a systolic array design method which derives 1 or 2 dimensional optimal planar systolic arrays from a given n dimensional problem represented as a regular recurrence equation and its implementation called a systolic array design system(SADS).The SADS parses a regular recurrence equation and gets the information such as problem space, data dependence vectors. and intial data positions. Systolic arrays are automati-cally derived by the space-time transformation form the information to be abeaired in the parsing phase.The SADS allows us to verify the parallel execution of the derived systolic aooay through the graghical interface.

• Journal of Korea Water Resources Association
• /
• v.34 no.3
• /
• pp.199-207
• /
• 2001

Due to the nationwide development, sediment yield has to be estimated to design the sedimentation basin which is used to minimize the effects of construction or disturbing the natural soil condition. But there is no proved equation for the estimation of sediment yield in Korea. Therefore, applicability and the limitation of RUSLE (revised universal sediment loss equation) sediment yield equation is examined for the construction sites, where the rainfall and sediment data are available. General mistakes in estimation of the RUSLE parameters are also discussed. It is found that RUSLE could be applied in Korea as long as the sediment delivery ratio was considered. Appropriate estimation method of sediment delivery ratio are also proposed.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.87-92
• /
• 2008

Tokamak reactor system analysis code was developed at KAERI (Korea Atomic Energy Research Institute) and is used here for the conceptual development of a DEMO reactor. In the system analysis code, prospects of the development of plasma physics and the relevant technology are included in a simple mathematical model, i.e., the overall plant power balance equation and the plasma power balance equation. This system analysis code provides satisfactory results for developing the concept of a DEMO reactor and for identifying the necessary R&D areas, both in the physics and technology areas for the realization of the concept. With this system analysis code, the performance of a DEMO reactor with a limited extension of the plasma physics and technology adopted in the ITER design. The main requirements for the DEMO reactor were selected as: 1) demonstrate tritium self-sufficiency, 2) generate net electricity, and 3) achieve a steady-state operation. It was shown that to access an operational region for higher performance, the main restrictions are presented by the divertor heat load and the steady-state operation requirements.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.197-198
• /
• 2012

If the mechanical development be applied to the Nuclear Power Plant Structures instead of the standard hook development, the problem of overcrowding re-bars in the anchorage zone can be solved and the construction quality of the concrete work will be improved. But there are some problems in applying it to the NPP structures because of the restriction on the re-bar yield strength and diameter. After the performance evaluation test for the mechanical development, we can develop the new design equation of the mechanical development length in order to solve the limitation and apply it to NPP structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.368-376
• /
• 2015

This paper is the study on the establishment of design model to improve design efficiency using modified weight estimation equation on the initial design stage for development of a helicopter. The methodology to extract coefficients of the weight estimation equation was proposed through the influence investigation for the weight of components and the parameter study and sensitivity analysis for design variables such as the rotor disk loading, the number of blade and the aspect ratio of blade were also performed. As a result of study, the relation of parameters and degree of sensitivity of parameters on helicopter design are considerable points for optimization of helicopter characteristics, and it is necessary for designer to consider the complex relation of main parameters.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2021

The purpose of this study is to analyze the reliability index of a design by applying the reduction factor of the recently developed fiber reinforced high strength concrete design guideline(draft). By collecting material and member test data performed for the development of the design guideline(draft), statistical characteristics of material strength and member strength analysis equations are obtained. A simul ation that appl ies the material statistical characteristics and the member anal ysis equation of the design guidel ine(draft) is performed, and the statistical characteristics of the section strength are calculated by combining the statistical characteristics of the analysis equation. Reliability analysis was performed by applying the load combination of the domestic highway bridge design code and concrete structural code, and it was confirmed that the design that applies the reduction factor for materials and members suggested in the design guideline(draft) satisfies the target reliability index.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.992-999
• /
• 2011

The recent power add-on drive wheelchairs (PADWs) provide greater physical activity, are easier to transport, and may be an excellent alternative for the typical manual or electric wheelchairs. The development of in-wheel motor for a PADW is the principal issues. In this paper, design, implementation, and testing of the permanent magnet synchronous motor (PMSM) for a PADW are presented. To design output power and torque of the motor, the equation of motion has been investigated. The design parameters were calculated and the dimension and shape of the motor which was limited by the In-wheel mechanism of the PADW were done by applying FEM and optimal design technique. The prototype of the motor mentioned above was fabricated with precise machining and assembling. Then the motor tested on dynamometer and the measured results of the motor were verified by comparing the design results. The fabricated motor was 80 mm in length with a diameter of 110 mm and small enough to be attached the driving unit of the PADW.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.716-719
• /
• 1995

Although design process is a creative work, it includes a lot of iterations. Statistics show that about 15 to 40 percent of the total design activity is spent on time-consuming retrieval of technical informations such as standard part, handbook, engineering equation,previous design and so on. On the other hand, product structure and parts specifications change with the design process, which also need to be traced accordingly. The BOM, design history, and all the relecant technical informations can be managed can be efficiently within a unified framework called configuration. This paper presents a prototype of a configuration manager which is a part of the engineering data management system for machine tools.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.416-428
• /
• 1999

A user-interactive pixel design tool for high-quality TFT-LCDs is realized and used to explore the sensitivity of the various array and device parameters for optimizing pixel design. In this tool, the Thompson cable equation and gradual-channel approximation were used for the gate time delay and TFT current modeling respectively. With this tool, each capacitance element, and TFT and array dimensions can be optimized under given design specifications. The electrical characteristics such ascharging ratio, gate time delay, pixel voltage level-shift, and holding ratio can be analyzed. The sensitivity analysis of those design parameters were executed and presented.

• Journal of The Korean Association For Science Education
• /
• v.17 no.3
• /
• pp.301-311
• /
• 1997

The purpose of this study is to construct a structural equation model and to analyze causal relationships among variables related to attitudes to science using structural equation modeling(SEM) with LISREL VII. The sample consisted of 483 10th grade boys from a general high school in Pusan, Korea. The questionnaires (ABC-attitude scale: affection, behavioral intention, cognition scale of attitude towards science) were developed by the researcher through a pilot study. And other instruments have modified previous ones. Five instruments were used in this study: GALT(group assessment of logical thinking), MTSlS(modified test of science inquiry skill), ABC-attitude scale, MSAS(modified scientific attitude scale), CSAT(common science achievement test). Structural equation modeling with LISREL VII($J\ddot{o}reskog$ & $S\ddot{o}rbom,$ 1993) was employed to estimate the causal inferences about hypothesized relationships among observed data sets. Three competing models consisted of five latent variable(scientific thinking ability, science inquiry skill, attitude towards science, scientific attitude, science achievement) - lP(inquiry preceding) model, AP(attitude preceding) model and AM(attitude mediating) model - were developed. Among these competing models, IP model satisfied the observed data sets. The causal relationships among "attitudes to science" and other latent variables were reliably identified. According to the results of the present study, science inquiry skill was the most significant variable that can predict science achievement. But scientific thinking ability has not directly influenced science achievement. This study suggests that inquiry based teaching-learning processes should be offered to students for improvement of science achievement. At the same time, it seems to be important to develop positive attitude towards science. Understanding of relationships among variables related to attitudes to science will be helpful to the development of science curriculum and to the design of science teaching and learning process. LISREL has been recognized as a useful approach in testing a SEM. However, in this study, LISREL approach was estimated as much more useful method for research design.