• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2135-2146
• /
• 2022

A nuclear energy facility is one of the most critical facilities to be safely protected during and after operation because the physical destruction of its barriers by an external attack could release radioactivity into the environment and can cause harmful effects. The barrier walls of nuclear energy facilities should be sufficiently robust to protect essential facilities from external attack or sabotage. Physical protection system (PPS) vulnerability assessment of a typical small nuclear research reactor was carried out by simulating an external attack with a tri-nitro toluene (TNT) shaped charge and results are presented. The reinforced concrete (RC) barrier wall of the research reactor located at a distance of 50 m from a TNT-shaped charge was the target of external attack. For the purpose of the impact assessment of the RC barrier wall, a finite element method (FEM) is utilized to simulate the destruction condition. The study results showed that a hole-size of diameter 342 mm at the front side and 364 mm at the back side was created on the RC barrier wall as a result of a 143.35 kg TNT-shaped charge. This aperture would be large enough to let at least one person can pass through at a time. For the purpose of the PPS vulnerability assessment, an Estimate of Adversary Sequence Interruption (EASI) model was used, which enabled the determination of most vulnerable path to the target with a probability of interruption equal to 0.43. The study showed that the RC barrier wall is vulnerable to a TNT-shaped charge impact, which could in turn reduce the effectiveness of the PPS.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.21 no.2
• /
• pp.39-56
• /
• 2010

The purpose of this study is to seek the solutions for development of young adults programs in the public libraries in Korea. The reasons for the problems and limitations of the young adults programs are the absence of personnel in charge of young adult service, the shortage in book stock and space, the low participation due to the educational environment pursuing only entrance examination, the poor system in public relations and the cooperation with young adult related organization etc. As the result of seeking solutions for the development of young adults programs in the public libraries based on these problems, followings are required: the establishment of young adults service system, placement of personnel in charge, the development of integrated young adult programs, strengthening of education for librarians in charge, and the establishment of young adult service network.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.585-586
• /
• 2010

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2002

This paper is concerned with the development of a new method for making, separating ice and storage floated ice by installing an evaporation plate at under-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating an ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. Developed new harvest-type method shows good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, however these components are not necessary in a new method. In this study ice storage systems are experimentally investigated to study the charge and discharge of thermal energy. The results show the applicable possibility and performance enhancement of a new type.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.690-691
• /
• 2009

This study intends to discuss the Charge and Discharge Monitoring System for HEV. Study is aim to charge and discharge stability and efficient. This study is include hardware module and application software development. It is possible to maintain charge and discharge performance efficiently.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.288-293
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• Particle and aerosol research
• /
• v.10 no.1
• /
• pp.27-31
• /
• 2014

A simple bimodal model has been developed to analyze charged particle coagulation by modifying previously suggested bimdal model for evolution of particle generation and growth. In the present model, two monodisperse modes are used and 40 charge nodes are assigned to each mode to account both change of the particle size and charge distribution. In addition, we also implemented the effect of electrostatic dispersion loss in the present model. Based on the developed model, we analyzed coagulation of asymmetric bipolar charged particles by computing evolutions of particle number concentration, geometric mean diameter of particles, charge asymmetric ratio and geometric standard deviation of particle size distribution for various initial charge asymmetric ratios. The number concentration of asymmetric bipolar charged particles decreases faster than that of neutral particles but that does not give faster growth of particles since the electrostatic dispersion loss overwhelms particle growth by coagulation.

• Journal of Multimedia Information System
• /
• v.6 no.3
• /
• pp.147-154
• /
• 2019

In a variety of fields, highly developed technology is being combined to create a lot of value. In order to keep up with this global trend, the Ministry of Education, which is in charge of national education, continuously develops and applies content for creative education to textbooks. The continuous development of content for creative education is not only related to national interests, but also to the continued development of mankind. Today, the succession and development of human knowledge is in charge of the education system. Research into an effective educational system is necessary for effective succession of rapidly developing science and technology and building up technical personnel with such skills. In particular, the computer science field is faster in development than other scientific fields and has accumulated many technologies, indicating that it takes a lot of time and good teaching to foster talent that can effectively utilize the technology. In this paper, elementary school subjects were analyzed to achieve the purpose of cultivating talent in the field of computer science. In addition, we have investigated techniques related to computer programming learning not covered in elementary school subjects. So we developed content that students need to practice. Next, we taught the content to randomly selected elementary school students and assessed their educational effectiveness. As a result of training using the content we developed, 55.37% increased academic performance.

• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.279-289
• /
• 2012

This study was conducted to survey and diagnose operation status of the agricultural machinery rental service, analyse and compare operational efficiency among 82 city and county ATDEC (agricultural technology development and extension center) using the DEA (Data Envelopment Analysis) method, and recommend future direction, for improvement of the business. Input variables were invested budget and labor, and output variable was rental return. Percentages of return to investment on the rental service were calculated as 68.3% and 63.9% when analyzed with CCR (Charnes, Cooper and Rhodes) and BCC (Banker, Charnes and Cooper) models, respectively, indicating inefficiency of the service operation. Increase of rental charge would increase efficiency by 63.9~68.3% depending on models, and decrease of financial and labor investment would improve the efficiency by about 11.3%. Technical efficiency would be more important than scale efficiency, therefore adjustment of over-invested budget and labor needed to be made together with increase of rental charge to improve the operation. Among the ATDECs providing the rental service, 6 (7.3%), 43 (52.4%), and 33 (40.2%) were in state of CRS (constant return to scale), IRS (increasing return to scale), and DRS (decreasing return to scale), respectively. These indicated public aspects of the rental system, over-investment, lack of output component for input component, meaning that scale income would be increased by qualitative expand of rental charge. Efficiency analysis of the rental system by region showed that efficient ATDECs to be benchmarked by others were in the order of DMU-70, DMU-54, DMU-29, DMU-5, DMU-22, DMU-2, and DMU-61. More comprehensive and extensive survey and analyses would be necessary in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.492-499
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.