• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.139-147
• /
• 2008

8 Exclusive Median Bus Lanes(EMBL) are operated in Seoul metropolitan city after the opening of Chon-ho section in 1996. But the changes in the road traffic demand on the direct and indirect influence area have not reported. In this paper, before and after survey and analysis of road traffic demand on 3 EMBLs opened in 2004 are conducted. In summary, the traffic demand of 3 EMBL road section decreased dramatically to 24.7% after the opening and then increased 1.4% after a year. The traffic demand of detour road decreased to 2.9% after the opening and then increased 0.3% after a year. Considering measurement error as ${\pm}5%$, Road traffic demands on the influence area of EMBL section are a stable state after one year. So it is presumed that the trip demand on EMBL section using vehicle does not make a detour around the influence area but divert into another transport modal.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.82-96
• /
• 2020

The Demand Responsive Transit (DRT) system is the flexible public transport service that determines the route and schedule of the service vehicles according to users' requests. With increasing importance of public transport systems in urban areas, the development of stable and fast routing algorithms for DRT has become the goal of many researches over the past decades. In this study, a new heuristic method is proposed to generate fast and efficient routes for multiple vehicles using demand clustering and destination demand priority searching method considering the imbalance of users' origin and destination demands. The proposed algorithm is tested in various demand distribution scenarios including random, concentration and directed cases. The result shows that the proposed method reduce the drop of service ratio due to an increase in demand density and save computation time compared to other algorithms. In addition, compared to other clustering-based algorithms, the walking cost of the passengers is significantly reduced, but the detour time and in-vehicle travel time of the passenger is increased due to the detour burden.

• Korea Real Estate Review
• /
• v.27 no.3
• /
• pp.51-70
• /
• 2017

This study aimed to measure street centralities with the street width, and to analyze their effects on the residential and non-residential land prices in Seoul, South Korea. Most of the studies on urban economics and policy focusing on the urban spatial structure have evolved in terms of their perspective from monocentric to polycentric models. Recently, their themes shifted to measuring street centralities and capturing their effects on urban phenomena. To expand the existing studies and discussion, this study analyzed the street centralities with the street width, and how they changed the land prices. Multilevel regression models generated a few key findings relevant to the relationship between street centralities and land prices. While a higher detour volume and closeness to wider streets commanded premium residential land prices, higher visibility and detour volume to wider streets were associated with higher non-residential land prices. These findings suggest a robust connection between street configuration and near-land prices. Thus, the results of this study suggest a few insightful policy implications for urban planners, urban designers, real estate developers, and appraisers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2018

In South Korea, Jeju Island has a role as a test bed for electric vehicles (EVs). All conventional cars on the island are supposed to be replaced with EVs by 2030. Accordingly, how to effectively set up EV charging stations (EVCSs) that can charge EVs is an urgent research issue. In this paper, we present a case study on planning the locations of EVCS for Jeju Island, South Korea. The objective is to determine where EVCSs to be installed so as to balance the load of EVCSs while satisfying demands. For a public service with EVCSs by some government or non-profit organization, load balancing between EVCS locations may be one of major measures to evaluate or publicize the associated service network. Nevertheless, this measure has not been receiving much attention in the related literature. Thus, we consider the measure as a constraint and an objective in a mixed integer programming model. The model also considers the maximum allowed distance that drivers would detour to recharge their EV instead of using the shortest path to their destination. To solve the problem effectively, we develop a heuristic algorithm. With the proposed heuristic algorithm, a variety of numerical analysis is conducted to identify effects of the maximum allowed detour distance and the tightness of budget for installing EVCSs. From the analysis, we discuss the effects and draw practical implications.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.4
• /
• pp.1-10
• /
• 2005

According to the aviational definition, the fog is an obscuration phenomenon when prevailing visibility becomes less than 1,000m. Fog defined above causes so many aviation traffic problems like detour, flight delay and cancel. Therefore this study investigated quantitatively the fog effects on flight operation using flight delay and cancel statistic data during last four years from 1st Jul. 2001 to 30th Jun. 2005 at the Incheon Int'l Airport. The results of this study show that the hazardous meteorological condition is a important cause of flight delay and cancel, especially fog phenomenon. And it is expected that the results of this study give us the necessary and importance of fog prediction at the Incheon Int'l Airport.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.4
• /
• pp.403-413
• /
• 1990

A collision free trajectory control for multiple mobile robots in obstacle-resident workspace is proposed. The proposed method is based on the concept of neural optimization network which has been applied to such problems which are too complex to be handled by traditional analytical methods, and gives good adaptibility for unpredictable environment. In this paper, the positions of the mobile robot are taken as the variables of the neural circuit and the differential equations are derived based on the performance index which is the weighted summation of the functions of the distances between the goal and current position of each robot, between each pair of robots and between the goal and current position of each robot, between each pair of robots and between obstacles and robots. Also is studied the problem of local minimum and of detour in large radius around obstacles, which is caused by inertia of mobile robots. To show the validity of the proposed method an example is illustrated by computer simulation, in which 6 mobile robots with mass and friction traverse in a workspace with 6 obstacles.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.563-566
• /
• 2006

In this paper, we studied about AGVs modeling and material handling automation simulation using a virtual AGV. The proposed virtual AGV model that operates independently each other is based on a real AGV. Continuous straight-line and workstation model using vector drawing method that could easily, rapidly work system modeling are suggested. Centralized traffic control, which could collision avoidance in intersection and should not stop AGV as possible, and algorithm for detour routing which performs when another AGV is working in pre-routed path are proposed. The traffic control and the algorithm have been proved efficiently by simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.700-705
• /
• 2006

This paper proposes a collision avoidance algorithm for two mobile robots with independent goals in a same workspace. Using skeleton map, an environment is presented as a graph consisting of nodes and arcs. Robots generate the shortest set of paths using the combination of objective functions of the two robots. Path for collision avoidance of a robot can be selected among three class; the shortest path, detour, paths with a waiting time at safety points around crossing points. Simulation results are presented to verify the efficiency of the proposed algorithms.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.1
• /
• pp.15-31
• /
• 1997

This work aims at examining the navigational safety of the entrance channels of Masan harbour and suggesting the way to improve ships' navigational safety through the channels. It has been found, from the on-scene investigation of the navigational safety at Masan, that the depth of the Budo-Sudo channel is not deep enough to cater for the largest vessel visiting the harbour, and that the No.2 navigational channel is not wide enough for the vessel. An additional new waterway, therefore, has been recommended to be established in the south of the Budo-Sudo channel so that the deep draft vessel can detour. The No.2 navigational channel has been recommended to be widen. The width of the channel was suggested to be 280 meters. A waterway design simulation methodology has been applied to examine the safety of the newly suggested channels. New channels have been proved to be safe from the experiment.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.9-14
• /
• 2007

This study was designated to clarify the aspect of the wave propagation around the cavity. The change of traveltime and amplitude of the seismic wave was observed according to the various wave velocities of the cavity. The seismic wave detour or penetrate the cavity depending on the seismic velocity of the in-filled material. Generally, seismic wave detours toward high velocity zone around the cavity, and when the velocity of the cavity material reaches to 80 % of the base rock, the wave penetrates the cavity. The traveltime of the detouring seismic wave is not sensitive to the change of the cavity velocity, but as the velocity of the cavity increases, the fall of the amplitude was reduced. The penetrating wave showed the steeply increasing amplitude due to the reiteration of the detouring wave.