• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.1-10
• /
• 2022

Recently, due to the frequent occurrence of localized torrential rains and heat waves caused by abnormal climates. For this reason, it is necessary to develop an economical and eco-friendly rainwater detention facility that can secure the groundwater level through rainwater detention as well as flood prevention against concentrated rainfall by simultaneously implementing rainwater permeation and storage. In this study, the structural safety of an eco-friendly rainwater infiltration type detention facility made using eco-friendly inorganic binders including red clay was examined. Static analysis considering the constant load and additional vertical load and dynamic analysis considering the seismic spectrum were performed. As a result, it was found that the eco-friendly prefabricated rainwater infiltration type detention facility developed in this study has a maximum stress of about 68.1% to 75.4% and a maximum displacement of about 0.9% to 9.6% under the same load and seismic conditions compared to the existing PE block rainwater detention facility. It was confirmed that the eco-friendly prefabricated rainwater infiltration type detention facility secured excellent structural stability.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.25-30
• /
• 2007

The purpose of this research is to analyze the water quantity of the rainwater detention system based on the Planning Simulation in Residential Areas. The contents of this research consists of two main parts. The first part is to calculate the supply water quantity of the rainwater detention system and the demand water quantity of the Wonheungs' ecological park. The second part is to analyze the difference between demand and supply of water quantity, based on the Planning Simulation, in the rainwater detention system. This research will contribute to the establishment of the environment-friendly site planning methods which increase the quality of residential environment in apartment housing.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.686-692
• /
• 2012

This study illustrates how to design and evaluate a non-point sources management detention pond using SWMM. In particular, special attention is given to the orifice design. In SWMM, orifice properties that need to be defined include its height above the bottom of the storage unit, its type, its geometry and its hydraulic properties. Among the various characteristics of orifice, the orifice hole size which is closely related to hydraulic retention time is focused in this study. Sensitivity analysis of orifice size in annual non-point sources reduction efficiency is carried out. In addition, a methodology which can be used to design a virtual junction in SWMM has been proposed to quantify water quality improvement triggered by the detention pond installation. As a result, it is recommended that a detention outlet should be designed to be about 2 to 3 days of hydraulic retention time.

• Korean Journal of Hydrosciences
• /
• v.7
• /
• pp.61-75
• /
• 1996

The purpose of this study is to develop an efficient model for the least cost design of multi-site detention systems. The IDP (Incremental Dynamic Programming) model for optimal design is composed of two sub-models : hydrologic-hydraulic model and optimization model. The objective function of IDP is the sum of costs ; acquisition cost of the land, construction cost of detention basin and pumping system. Model inputs include channel characteristics, hydrologic parameters, design storm, and cost function. The model is applied to the Jung-Rang Cheon basin in Seoul, a watershed with cetention basins in multiple branching channels. The application results show that the detention system can be designed reasonably for various conditions and the model can be applied to multi-site detention system design.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.2 s.17
• /
• pp.17-28
• /
• 2005

The objective of this study is to evaluate the critical duration between detention facility and flood control facility of small size catchment. 4 small size catchments are applied for hydrological analysis and rainfall excess is computed by using the NRCS Runoff Curve Number method. The critical duration of detention facility and flood control facility is evaluated using the concept of allowable release rate. The conclusions studied in this study are as follows; (1) The type of temporal pattern of design rainfall which causes maximum storage ratio has resulted in Huff's 2 quartile in case of the use of the concept of allowable release rate. (2) Based on (1) of conclusion, the critical durations of flood control facility are similar to those of detention facility, which is used for uncontrolled single detention pond.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.121-128
• /
• 2009

Objectives of this study were to investigate influencing factors of detention time, particle size distribution, and filter medium characteristics for waterworks sludge dewatering. The stepped pressure filtration was carried out with lab scale apparatus and the filter press pilot test for dewatering was conducted at the water treatment plant. Effects of filter medium and polymer dose were examined through observing water content and dewatering velocity and cyclic dewatering rate with filter press pilot test. Relationships among detention time, particle size distribution and filtration resistance were analyzed. Prolongation of sludge detention time was found to cause blinding phenomenon in cake and filter medium and to decrease dewatering process efficiency. The average specific resistance increased according to detention time. In pilot test of dewatering for thickened sludge with Nylon Multi-NY840D and Nylon Mono-100% filter media, dewatering velocities were 0.92 and $0.93kg\;DS/m^2{\cdot}hr$ according to 0.1% polymer dose of dried solids weight base. And cyclic dewatering rates were 2.45 and $2.50kg\;DS/m^2{\cdot}cycle$ cycle for the Nylon Multi-NY840D and Nylon Mono-100% media. Dewatering velocity of polymer dosed sludge was observed to be higher than that of non-polymer sludge.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.343-350
• /
• 2004

For the last two decades, Seoul has always been affected by large floods. As climate change causes more frequent localized heavy rains exceeding the capacity of sewer or river to discharge water, flood damage is expected to increase. Under the situation, detention facilities for lacking capacity of sewers can control stormwater runoff to reduce flood damage in urbanized areas. In this study, in order to reduce flood damage in Cheonggyecheon areas, the capacity of detention facilities was decided to make up for the lacking capacity of main sewers in case of the rainfall in July, 2001 as large flood. The average amount of stormwater detained in eight Cheonggyecheon drainage areas is $235.09m^3/ha$. Location and size of stormwater detention facilities is designed to have effects in short term by targeting the reduction of flood damage. Schools and parks are suggested as optimal locations where detention facilities are constructed in drainage areas.

• Water for future
• /
• v.24 no.4
• /
• pp.73-84
• /
• 1991

A number of planning models that are used for preliminary design of detention ponds in urban area were compared with consideration of urbanization effects. The characteristics of hydrological parameters $\alpha$, $\gamma$ which are used in planning models wee analyzed. And a new planning model for detention ponds was suggested. The required storage volumes of the Sinjung I, Myunmock, and Hannam detention pond were calculated by the planning models with the catchment data. The applicability of planning models to estimate the required storage volume of detention pond was investigated. Mori and Rational model have the trend of overstimation of storage volumes of detention ponds, on the other hand Abt & Grigg and Kadoya model show the trend of understimated values, and the rest of the planning models show the reasonable volumes.

• Journal of the Korean Geophysical Society
• /
• v.7 no.2
• /
• pp.151-155
• /
• 2004

To solve the urban flood problems, it must get the enough channel conveyances and pumping capacities. It needs set up the detention system to control the flow over the channel capacity. Inspite of this detention system, the peak flow may increased by rainfall distribution and the delay of flow. This shows a design model of detention system which can consider the time problems from mutual connections of the detention storages and pumping flow using IDP(Incremental Dynamic Programming) method.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.125-136
• /
• 2020

Freight charges are one of the major clauses in the voyage charter. However, in case of unexpected delays at loading and discharging ports, the owner of the ship would not be willing to cover the various costs he should bear by paying the freight receives from the charterer. Therefore, the shipowner, whose time and the ship would be both considered to be an expense, would try to reduce the laytime as least as possible when signing the charter party and to receive compensation such as demurrage and damage for detention from the charterer, just waiting for the agreed laytime to pass. In this study, we review the differences between demurrage and damage for detention and examine the acknowledgeable circumstances through the actual cases. Since the shipowner and the charterer do not often agree on the damage for detention from the respective contract, it is necessary to examine each. Besides, the shipowner and the charterer must acquaint the damage for detention and specify in a contract, to compensate for the actual loss of the shipowner.