• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1425-1427
• /
• 1995

The effect of the magnetic flux interference between the driving and detecting unit of the gyroscope by the electromagnetic force has been investigated quantitatively. The key parameter dictating the output characteristics of the gyroscope which is driven and detected using electromagnetic force is the mutual interference between the driving and detecting unit. Using the specially designed apparatus for positioning of the detecting unit, it is found that the vertical positioning of the detecting unit plays a significant role in minimizing the interference effect as evidenced by our experimental results.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.45-49
• /
• 2003

Wireless life signal detecting system is implemented with using the mechanism of Doppler Effect. This system can measure the respiration and heart rates with the periodic movement of skin and muscle near the heart. The system is consisted of antenna, RF transmitter, receiver, and display part. We did use two operating frequencies at 1.9 ㎓ and 10 ㎓. Firstly, the link budget about detecting system is analyzed and the signal detected from the system is compared with electrocardiogram(ECG) of monitor which is using for patient monitoring in hospital. Secondly, the detection of vital sign is also performed according to the different distances, and including behind the wall.

• Bioinformatics and Biosystems
• /
• 제1권1호
• /
• pp.67-72
• /
• 2006

The aim of this paper is to discuss the effect of missing values in detecting differentially expressed genes in a cDNA microarray experiment in the context of a one sample problem. We conducted a cDNA micro array experiment to detect differentially expressed genes for the metastasis of colorectal cancer based on twenty patients who underwent liver resection due to liver metastasis from colorectal cancer. Total RNAs from metastatic liver tumor and adjacent normal liver tissue from a single patient were labeled with cy5 and cy3, respectively, and competitively hybridized to a cDNA microarray with 7775 human genes. We used $M=log_2(R/G)$ for the signal evaluation, where Rand G denoted the fluorescent intensities of Cy5 and Cy3 dyes, respectively. The statistical problem comprises a one sample test of testing E(M)=0 for each gene and involves multiple tests. The twenty cDNA microarray data would comprise a matrix of dimension 7775 by 20, if there were no missing values. However, missing values occur for various reasons. For each gene, the no missing proportion (NMP) was defined to be the proportion of non-missing values out of twenty. In detecting differentially expressed (DE) genes, we used the genes whose NMP is greater than or equal to 0.4 and then sequentially increased NMP by 0.1 for investigating its effect on the detection of DE genes. For each fixed NMP, we imputed the missing values with K-nearest neighbor method (K=10) and applied the nonparametric t-test of Dudoit et al. (2002), SAM by Tusher et al. (2001) and empirical Bayes procedure by $L\ddot{o}nnstedt$ and Speed (2002) to find out the effect of missing values in the final outcome. These three procedures yielded substantially agreeable result in detecting DE genes. Of these three procedures we used SAM for exploring the acceptable NMP level. The result showed that the optimum no missing proportion (NMP) found in this data set turned out to be 80%. It is more desirable to find the optimum level of NMP for each data set by applying the method described in this note, when the plot of (NMP, Number of overlapping genes) shows a turning point.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.211-214
• /
• 2002

Under a continuous manufacturing process, two dimension inspection system causes problems as blurring effect and low resolution and requires position calibration between frames. One dimension inspection system is, therefore, being researched as a substitution. In this paper, we implement mechanism of switching memory and processing data for reasonable one dimension inspection system. Redundant weft image and noise was suggested to be reduced by new method using modified morphological process and masked erosion process. From resulting image, line data and possible error information were obtained and constructed as a structure. Finally, error detecting algorithm was performed with this data structure. Processing time of error detecting was 0.625ms per line in applied system and experiment showed 94.7% of error detecting ability. This method is 20% faster in speed and 2.7% higher in error detecting ability comparing with the present method.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.72-79
• /
• 1997

The dominant physical process repsonsible for the nonlinear gain is from spectral-hole burning with the time constant fo about 50fs and the contribution to the nonlinea rgain form hot carriers effect is determined to be about 15% of the contribution due to spectral-hole burning. To prove the above results we fit the data of hall and found that hot carriers have a profound effect on their experimental data despite the fact that the magnitude of hot carriers effect is only 15% of spectral-hole burning. We suggest that the experimenta with a pump pulse width of 180 fs is very sensitive in detecting the effect of hot carriers, but is not sensitive in detecting much faster process associated with spectral-hole burning.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.32-39
• /
• 1990

The ${\gamma}$-Fe$_2$O$_3$ compounds were oxidized in the furance after gas detecting sensor made molding as the Fe$_3$O$_4$ the synthesized Fe$_3$O$_4$, by ferrous sulfate and sodium hydroxide. Their sensities on carbon monoxide, ethyl alcohol and L. P. G. were measured at various temperatures, respectively. And then their electrical resistivities, thermal properties (D.T.A. ＆ T.G.A.), were examined about their having an effet on the gas-sensing in company with the effect of pure ${\gamma}$-Fe$_2$O$_3$ and the detecting sensor ${\gamma}$-Fe$_2$O$_3$, which reacts with $K_2$CO$_3$ in the hydrothermal coundition, and the electrical conductive mechanism was reflected simultaneously. It was observed that the electrical conductivities and response ratios showed highest value at the endothermic temperature part, 300~35$0^{\circ}C$ of D.T.A.―curve. Consequently, the response ratios and response times of the hydrothermal detecting sensor were higher than that of pure detecting sensor, the specific surface areas were the highest at the endothermic range of D.T.A.-curve. These response ratios of detecting sensor for $K_2$CO$_3$, process at hydrothermal condition on carbon monoxide appeared higher than that on ethyl alcohol and in case of L.P.G. last.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.54-60
• /
• 2001

A newly designed inductive micro displacement detecting system is presented. The proposed inductive system consists of driving coils, position-detecting coils, cores, and closed-loop formed magnetic blocks. The cores and magnetic blocks are made of Mn-Zn ferrite. When AC sine wave is applied to the driving coils, the time derivative flux is generated within the system, and then induced voltages arise in the position-detecting coils according to the core\`s position. Putting the cores to be moved proportionally to the input displacement, the induced voltage is proportional to input displacement. The parameters that affect the system characteristics are turn ratio, air-gap size, excitation frequency, overlap area, load resistance, capacitance effect, and so forth. Based on the experimental results, the system parameters are selected in such a way as to have high sensitivity ad stable responses. The sensitivity of the proposed inductive displacement-detecting system is greater than 2800mV.V-1mm-1 and the linearity error is below $\pm$0.10% in the range of $\pm$200㎛.

• 센서학회지
• /
• 제10권1호
• /
• pp.33-41
• /
• 2001

와이어 로프는 무거운 중량을 안전하게 운반하거나 기계적인 에너지를 빠르게 전송하는 곳과 같은 산업응용 분야에 광범위하게 사용되어 왔다. 특히, 운전 중 엘리베이터의 와이어 로프가 파손되면 큰 재산 상 손실과 주변 인명의 심각한 상해를 초래할 수 있다. 따라서, 와이어 로프의 정기적인 검사는 매우 중요하다. 와이어 로프의 고장 검출은 로프의 구조, 특성, 결함 특성, 검출방법과 신호처리 방법에 대한 기본적인 이해가 요구된다. 이 연구에서는 엘리베이터에 노화된 와이어 로프에 대한 마모, 단선, 부식과 형붕괴와 같은 결함을 검출하기 위하여, Hall 센서를 결합한 새로운 결함 검출시스템의 개발에 대하여 다룬다. 휴대용 계측기로서 검출기를 사용하기 위하여, Hall 센서를 가진 센싱 부분과 아날로그 신호처리 및 프로그램의 제작에 대한 몇 가지 특성들이 서술되었다. 제작된 검출시스템에 대한 실험과 실장시험 결과 역시 제시되었다. 그 결과, 검출시스템은 사용 중인 노화된 와이어 로프의 결함을 검출하는데 양호한 효율성을 갖는다는 것을 확인하였다.

• Journal of the Korean Statistical Society
• /
• 제24권2호
• /
• pp.495-506
• /
• 1995

We present formula for detecting influential observations on the smoothing parameter in smoothing spline. Further, we express them as functions of basic building blocks such as residuals and leverage, and compare it with the local influence approach by Thomas (1991). An example based on a real data set is given.

• Journal of Information Technology Applications and Management
• /
• 제11권4호
• /
• pp.87-94
• /
• 2004

The software reliability growth model(SRGM) has been developed in order to estimate such reliability measures as remaining fault number, failure rate and reliability for the developing stage software. Almost of them assumed that the faults detected during testing were evetually removed. Namely, they have studied SRGM based on the assumption that the faults detected during testing were perfectly removed. The fault removing efficiency. however. IS imperfect and it is widely known as so in general. It is very difficult to remove detected fault perfectly because the fault detecting is not easy and new error may be introduced during debugging and correcting. Therefore, the fault detecting efficiency may influence the SRGM or cost of developing software. It is a very useful measure for the developing software. much helpful for the developer to evaluate the debugging efficiency, and, moreover, help to additional workloads necessary. Therefore. it is very important to evaluate the effect of imperfect dubugging in point of SRGM and cost. and may influence the optimal release time and operational budget. I extent and study the generally used reliability and cost models to the imperfect debugging range in this paper.