• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.183-183
• /
• 2015

Arc in plasma processing chamber results in high current discharge marks and particles on wafers, but it is hard to identify or observe it during the proc ess. In this paper, we report the observations of plasma arc s during various plasma proc esses through a non-invasive optic al plasma monitoring system (OPMS) devised for the in-situ detec tion of abnormal discharge.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.330-339
• /
• 2015

Power quality (PQ) problems are becoming a big issue, since delicate complex electronic devices are widely used. We present a new denoising technique using discrete wavelet transform (DWT), where a modified correlation thresholding is used in order to reliably detect the PQ disturbances. We consider various PQ disturbances on the basis of IEEE-1159 standard over noisy environments, including voltage swell, voltage sag, transient, harmonics, interrupt, and their combinations. These event signals are decomposed using DWT for the detection of disturbances. We then evaluate the PQ disturbance detection ratio of the proposed denoising scheme over Gaussian noise channels. Simulation results also show that the proposed scheme has an improved signal-to-noise ratio (SNR) over existing scheme.

• 소음진동
• /
• 제7권6호
• /
• pp.931-936
• /
• 1997

Optical fiber sensor is a subject which has been attracted considerable attention in recent years. Detection of sound pressure with optical fibers positioned in the arms of a Mach-Zehnder interferometer is presented in this paper. A fiber length of the order of 150m is wounded is made by hollow cylinder type. To increase the sound signal 3${\times}3$ directional coupler is used. Fiber optic hydrophone is the underwater tank with 2kHz sound source. Finally, it is shown that the fiber optic hydeophone can stably detec 2kHz sound.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.12-18
• /
• 2001

Frequency domain has been used to detect chatter vibration and to decide commencing point of chatter for the milling processes. For this, power spectrum of accelerations signal is analyzed in the frequency domain. Also, the power spectrum and surface roughness are measured, compared, and evaluated according to the depth of cut by experimental works. As a results, it is known that the commencing point of chatter can be decided the behavior of the maximum amplitude of the power spectrum of acceleration signal and there is a correlation between the power spectrum of acceleration signal and the surface roughness. In conclusion, the power spectrum of acceleration signal can be used as a useful information for detec-tion and estimation of chatter vibration in machining.

• Journal of Communications and Networks
• /
• 제1권2호
• /
• pp.118-133
• /
• 1999

In this paper we compare linear and non-linear inter-ference cancellation for systems employing code division multi-ple access (CDMA) techniques. Specifically, we examine linear and non-linear parallel interference cancellation(also called multi-stage cancellation) in relationship to other multiuser detection al-gorithms. We show the explicit relationship between parallel inter-ference cancellation and the decorrelator (or direct matrix inver-sion). This comparison gives insight into the performance of paral-lel interference cancellation (PIC) and leads to vetter approaches. We also show that non-linear PIC approaches with explicit chan-nel setimation can provide performance improvement over linear PIC, especially when using soft non-linear symbol estimates. The application of interference cancellation to non-linear modulation techniques is also presented along with a discussion on minimum mean-squared error(MMSE) symbol estimation techniques. These are shown to further improve the performance of parallel cancella-tion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.293-301
• /
• 1997

Edge detection is the first step and very important step in image analysis. We cast edge detec¬tion as a problem in cost maximization. This is acheived by the formulation of a cost function that evaluates the quality of edge configurations. The cost function can be used as a basis for compar¬ing the performances of different detectors. We used a Genetic Algorithm for maximizing cost func¬tion. Genetic algorithms are a class of adaptive search techniques that have been intensively stud¬ied in recent years and have been prone to converge prematurely before the best solution has been found. This paper shows that carefully chosen modifications(three factors of the crossover opera¬tor) are implemented can be effective in alleviating this problem.

• 방재기술
• /
• 통권19호
• /
• pp.9-16
• /
• 1995

The spot-type heat detector is a main component of the automatic fire alarm system intended to signal when heat energy is produced in protected area. The most of protected area in our country is installed spot-type heat detector. On this study, the responsiveness to the change of environmental temp. of spot-type heat detec-tor were obtained and analyzed under specified temp., velocity in accordance with the KOFEIS stan-dard. The experiment was carried under the condition with the change of environmental temp. Concluion of this study is as follows : 1. It was confirmed that the responsiveness of rate-of rise heat detector is sensitive to temp. below 10 degrees above zero. The malfunction appeared at 40 degrees above zero and intended performance is disqualified at 50 degrees above zero. 2. The intended performance of fixed-temp. detector which is maintained for the change of envi-ronmental temp. But the responsiveneness is confirmed instability for the change of environmental temp.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.25-31
• /
• 2013

국도 및 고속도로에 기 설치된 AVC System은 두 개의 Piezo Sensor를 평행 하게 설치하여 차량의 축수,축간거리, Front hang 등의 정보를 취득한다. 이러한 시스템은 두 개의 Piezo 신호만을 분석하여 사용하기 때문에 차량의 편향 주행등과 같은 주행패턴이나 센서 이상 등에 능동적으로 대처하기 힘들다. 차종의 분류성능 개선을 위해 제3의 센서인 사선 센서를 도입하여 3-sensor AVC 구동 알고리즘을 제시하였다. 본 알고리즘은 차량의 유거 및 윤폭정보를 기존의 정보 스키마에 추가함으로써 취득된 차종분류 정보 오분류를 획기적으로 줄일 수 있었다. 또한 이러한 이론적 알고리즘을 현장에 적용하여 실질적인 개선 효과가 있음을 증명할 수 있었다.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.180-189
• /
• 1994

철근콘크리트 구조물의 손상을 진동반응특성치의 변화를 측정한 자료로부터 예측할 수 있는 실용적인 방법론이 제시되었다. 먼저, 구조물에 발생한 손상의 위치를 구조물 모드형상의 변화로부터 결정할 수 있는 알고리즘이 요약되었다. 다음으로, 실물크기 1/3 촉소 건조된 철근콘크리트 구조물을 사용한 실험에서 알고리즘을 이용하여 손상의 위치를 예측하였다. 이 실험과정에는 손상발생 전$\cdot$후의 소수의 진동반응특성치가 사용되었다. 구조물의 손상을 예측한 결과로부터 알고리즘이 손상을 정확하게 발견하는 것으로 판명되었다.

• 한국전자파학회지:전자파기술
• /
• 제5권1호
• /
• pp.40-50
• /
• 1994

자신이 위치를 파악하는 전자항해 시스템 중에서도 저궤도 위성인 GPS 위성을 이용한 위치측정 방식은 지구상 어느곳에서 언제든지 고정밀 3차원의 전천후 실시간 위치측정이 가능한 방식이다. 이 GPS위성의 전파가 통과하게 되는 전리층의 변화를 분석하기 위하여 전리층 변동에 다른 현상을 관측하여 GPS 위성에 의한 위치 측정 오차와 전리층 변화와의 관계를 모델링 하여 임의의 지역에서의 GPS 수신기에 의한 실제의 샘플 데이타를 사용하여 시간, 양각, 방위각 등을 변화시켜 가면서 컴퓨터 시뮬레이션을 통하여 성능을 비교 분석하였다 실험결과 제안한 단일 주파수 GPS 사용자일 경우에 전리층 시간지연은 어느정도의 오차가 존재하지만 실제 실험에의한 시간지연이 5~6nsec이고 본 논문에서의 결과가 상태가 양호한 경우에는 5~7nxec정도까지 근접함을 알 수 있었다. 이것은 본논문에서의 전리층 전파특성 알고리듬이 실제 실험 결과치와 근하하게 일치함을 나타낸다.