• 대한조선학회논문집
• /
• 제56권1호
• /
• pp.94-101
• /
• 2019

Underwater acoustic power should be measured in a free field, but it is not easy to implement. In practice, the measurement could be performed in a reverberant field such as a water-filled steel tank and concrete tank. In this case, the structure and the acoustic field are strongly or weakly coupled according to material properties of the steel and water. So, characteristics of the water tank must be investigated in order to get the accurate underwater acoustic power. In detail, modal frequencies, mode shapes of the structure and frequency response functions of the acoustic field could represent the characteristics of the reverberant water tank. In this paper, the structure-acoustic coupling has been investigated on a reverberant water tank numerically and experimentally. The finite element analysis has been carried out to estimate the structural and acoustical modal parameters under the dry and water-filled conditions, respectively. In order to investigate the structure-acoustic coupling effect, the numerical analysis has been performed according to the structure stiffness change of the water tank. The acoustic frequency response functions were compared with the numerical analysis and acoustic exciting test. From the results, the structural modal frequencies of the water-filled condition have been decreased compared to those of the dry condition in the low frequency range. The acoustic frequency response functions under the coupled boundary conditions showed different patterns from those under the ideal boundary conditions such as the pressure release and rigid boundary condition, respectively.

• 항공우주기술
• /
• 제7권1호
• /
• pp.68-75
• /
• 2008

우주방사선환경은 위성의 운용궤도와 임무 기간 및 시기에 따라 달라지고 시뮬레이션을 통 해 예측이 가능하다. 총 이온화 조사량(TID)의 경우 dose-depth 곡선으로 차폐두께에 따른 조사량을 알 수 있다. 그러나 이는 차폐두께에 따른 조사량의 정보만 보여주므로 실제 차폐 구조물의 형상에 따른 부품수준에서의 총 이온화 조사량을 예측하기 위해서는 구조물의 형태를 고려한 유효 방사선 차폐두께의 상세 분석이 필요하다. 이를 위해 다양한 구조형상을 3차원 좌표로 입력하여 모델링이 가능하게 하고 여기에 임의 지점에서 방사되는 ray를 이용하여 구조체의 전 방향에 대한 유효 차폐두께분포를 계산하는 프로그램을 개발하였다. 이 분포결과를 위성의 우주임무환경에서 예측되는 dose-depth 곡선 데이터와 결합하여 최종적으로 위성내부의 임의지점에서 예측되는 총 이온화 조사량을 계산함으로써 3차원 구조형상을 고려한 상세 분석이 가능하도록 하였다. 이를 이용하여 위성의 전자박스구조를 모델링하여 부품수준의 임의지점에서 예측되는 총 이온화 조사량을 분석하였다.

• Smart Structures and Systems
• /
• 제32권5호
• /
• pp.281-295
• /
• 2023

The purpose of this study is to demonstrate and verify the application of phase-control absolute-acceleration-feedback active tuned mass dampers (PCA-ATMD) to multiple-degree-of-freedom (MDOF) building structures. In addition, servo speed control technique has been developed as a replacement for force control in order to mitigate the negative effects caused by friction and inertia. The essence of the proposed PCA-ATMD is to achieve a 90° phase lag for a structure by implementing the desired control force so that the PCA-ATMD can receive the maximum power flow with which to effectively mitigate the structural vibration. An MDOF building structure with a PCA-ATMD and a real-time filter forming a complete system is modeled using a state-space representation and is presented in detail. The feedback measurement for the phase control algorithm of the MDOF structure is compact, with only the absolute acceleration of one structural floor and ATMD's velocity relative to the structure required. A discrete-time direct output-feedback optimization method is introduced to the PCA-ATMD to ensure that the control system is optimized and stable. Numerical simulation and shaking table experiments are conducted on a three-story steel shear building structure to verify the performance of the PCA-ATMD. The results indicate that the absolute acceleration of the structure is well suppressed whether considering peak or root-mean-square responses. The experiment also demonstrates that the control of the PCA-ATMD can be decentralized, so that it is convenient to apply and maintain to real high-rise building structures.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2254-2259
• /
• 2011

The introduction of Personal Rapid Transit (PRT) has been widely discussed in the Korean transportation research field. However, there is no robust criterion to derive the throughput of cars and passengers at PRT stations, which plays a primary role in determining the overall capacity of PRT systems. The present study provided a methodology to rigorously compute the capacity for simple-serial PRT stations with a single platform, considering three decisive factors, i.e., the demand level of incoming cars and outgoing passengers, the station structure, and the operation strategy. A micro-level simulator was developed for the analysis of station capacity. And, by using this, station capacities were presented for various combinations of the decisive factors. In particular, the relationship between capacity and station structure was investigated in detail. Station structure is represented by the numbers of platform berths, input queue berths, and output queue berths. Moreover, both waive rate and waiting time, which represent the level of passenger service, were taken into account when the station throughput was computed.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.104-109
• /
• 2009

In the view of the importance of material reduction due to the jump in oil and steel prices, an optimized structural system for lifting lugs was developed. Such a system is needed hundreds of thousands of times a year. A direct design process was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. In order to verify the system efficiency and convenience, several new prototype lug shapes were suggested using the developed system. From these research results, it was found that the slope of the main plate of the lug structure has a tendency to move from about 45 degrees to about 60 degrees and the design weight was reduced from an initial value of about 32kgf to about $15{\sim}19kg_f$ after the redesign. Based on these initial research results, an efficient reduction in steel weight was expected considering the enormous consumption of lug structures per year. Additionally, a more detail structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for a lug structure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1175-1178
• /
• 2005

Brittle materials, especially single-crystal silicon wafer, are widely used for sensors, IC industry, and MEMS applications. e general machining process of crack easy materials is by chemical agents, but it is hazardous and time consuming. Also, it is difficult to get high aspect ratio micro structure. As an alternative tool, an AJM(Abrasive jet machining) is promising method in terms of high aspect ratio and production cost. In this study, to get more precise detail compared to general AJM, photo polymer mask, SU-8, used in photolithography was applied in AJM. Process parameters such as abrasive diameter, air pressure, nozzle diameter, flow rate of abrasive in AJM and a variety of conditions in spin coating were decided. Finally, micro channel and mixer was fabricated to see the efficiency of the AJM with photo polymer mask.

• 한국농공학회논문집
• /
• 제48권6호
• /
• pp.45-56
• /
• 2006

The finite element method is a practical tool to compute the response of the irregularly layered soil deposit to the base-rock motions. The method is useful not only in estimating the interaction between the structure and the surrounding soil as a whole and the local behavior of the contacting area in detail, but also in predicting the resulting behavior of the superstructure affected by such soil-structure interactions. However, the computation of finite element analysis is marched in the time domain (TD), while the site response analysis has been carried out mostly in the frequency domain (FD) with equivalent linear analysis. This study is intended to compare the results of the TD and FD analysis with focus on the peak response accelerations and the predominant frequencies, and thus to evaluate the applicability and the validity of the finite element analysis in the site response analysis. The comparison shows that one can obtain the results very close to that of FD analysis, from the finite element analysis by including sufficiently large width of foundation in the model and further by applying partial mode superposition. The finite element analysis turned out to be well agreeing with FD analysis in their computed results of the peak acceleration and the acceleration response spectra, especially at the surface layer.

• 한국연소학회지
• /
• 제12권1호
• /
• pp.28-37
• /
• 2007

Numerical study is conducted to grasp the flame structure and NO emissions for a wide range of oxy-fuel combustion (covering from air blown combustion to pure oxygen combustion) and for various mole fractions of recirculated $CO_2$ in $CH4-O_2/N_2/CO_2$ counterflow diffusion flames. Special concern is given to the difference of the flame structure and NO emissions between air blown combustion and oxy-fuel combustion w/o recirculated $CO_2$ and is also focused on chemical effects of recirculated $CO_2$. Air blown combustion and oxy-fuel combustion w/o recirculated $CO_2$ are shown to be considerably different in the flame structure and NO emissions. Modified fuel oxidation reaction pathways in oxygen-enriched combustion are provided in detail compared to those in air blown combustion w/o recirculated $CO_2$. The formation and destruction of NO through Fenimore and thermal mechanisms are also compared for air blown combustion and oxyegn-enriched combustion w/o recirculated $CO_2$, and the role of the recirculated $CO_2$ and its chemical effects are discussed. Importantly contributing reaction steps to the formation and destruction of NO are also estimated in oxygen-enriched combustion in comparison to air blown combustion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.337-338
• /
• 2006

The purpose of this study is to find out main factors affecting public enterprise's environment, which improves the performance of public enterprise. In detail, under the premises of keeping publicity in Korea Electricity Industry, the main target of this study is to seek after factors enhancing entrepreneurship and deals with publicity which is related with entrepreneurship. Questionnaires are distributed to the employee of public enterprise, public servants, and civil corps. A total of 553 copies are collected. The main contents of questionnaires are related with the effect of publicity and entrepreneurship by government control, competitive environment, and shareholding structure in Korea Electricity Power Corporation(KEPCO). The results of this survey are as follows : First, government control is negatively related to the entrepreneurship while it is positively related to the publicity. Second, this survey shows that competitive environment has a positive influence on promoting both publicity and entrepreneurship. Third, this survey in connection with shareholding structure indicates that present structure in KEPCO has a positive effect on publicity but negative effect on entrepreneurship. According to this empirical results, it is verified that the main issues on the performance of KEPCO are related with the level of government control and competitive environment in its industry.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.244-252
• /
• 1997

$LiCO_3, Al_2O_3, Fe_2O_3$ 혼합물을 1620K에서 반응시켜 리튬전지의 음극재료로 응용이 가능한 스핀넬형 $LiAl_{2.5}/Fe_{2.5}O_8$를 합성하였다. XRD의 Rietveld 해석을 통하여 결정구조 해석을 하였다. 고용체의 공간군은 $P4_3$32(a=8.1293$\AA$)이고, 결정구조해석의 최종 Residual index는 약 5%정도이었다. 역 스핀넬구조에서 양이온 $Al^{3+}, Fe^{3+}$은 4-배위와 6-배위로 위치하고, $Li^+$은 4b, 12d의 6-배위자리에 존재하였다.