• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.93-121
• /
• 2011

This article is concerned with the withdrawal of the compositional principle of Jinogigut which has been performed in Seoul and the identification of its meaning based on the withdrawal. Jinogigut is a world where a god is connected to humans in complicated manners, this world and the world of the dead coexist, and it is a process of demonstrating that the dead, who have stayed in the world of humans, enter the world of a god. Jinogigut shows the process of leading the dead to the world of the dead one after another. First, the god-centered street is continued, and the gut displays through which process a god will guide the dead to the world of the dead. Next, is a human-centered street, which exhibits the appearance of the dead heading to the world of the dead following the death angel, more in detail. Finally, a human-centered structure shows how humans enter the world of the dead. Through this repetition, it reveals that the dead take a seat in the world of the dead, at last. The organization of the later part of the world of the dead-oriented gut in Jinogigut, which is god-centered, continues to a human-centered gut through the meeting between a god and humans. and , which are continued, followed by , are ceremonial rituals that confirm the dead entering the world of the dead without any problem. Begareugi shows that the entering of the dead into the world of the dead was completed with perfection by cutting hemp cloth, and informs the living that the dead expressed gratitude for holding the ritual for him/her by appearing at the venue of the gut once again and that the dead settled into the world of death. , which finally holds ancestral rites to the god of ancestors who is seated in the world of the dead, reveals that the dead, who had been a human, has been transformed into the god of ancestors through Jinogigut. Jinogigut also performs the function of comforting a client (who is the family of the dead) of the gut, who has faced a sudden death in his/her family. What is the most important for consoling the client is to display that the dead has entered the world of the dead without any problem. Jinogigut shows this process through a three-layered structure. It exhibits how the dead would be moved to the world of gods, as well as the safe entering of the dead who followed Jeoseung-saja(envoy from the world of the dead) and who had appeared to this world from the world of the dead. Then, it demonstrates again the appearance of the dead entering the world of the dead following Barigongu; thus, it placates the heart of the client's family.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.225-285
• /
• 2017

In regard to the regulations related to the RPA(Remotely Piloted Aircraft), which is sometimes called in other countries as UA(Unmanned Aircraft), ICAO stipulates the regulations in the 'RPAS manual (2015)' in detail based on the 'Chicago Convention' in 1944, and enacts provisions for the Rules of UAS or RPAS. Other contries stipulates them such as the Federal Airline Rules (14 CFR), Public Law (112-95) in the United States, the Air Transport Act, Air Transport Order, Air Transport Authorization Order (through revision in "Regulations to operating Rules on unmanned aerial System") based on EASA Regulation (EC) No.216/2008 in the case of unmanned aircaft under 150kg in Germany, and Civil Aviation Act (CAA 1998), Civil Aviation Act 101 (CASR Part 101) in Australia. Commonly, these laws exclude the model aircraft for leisure purpose and require pilots on the ground, not onboard aricraft, capable of controlling RPA. The laws also require that all managements necessary to operate RPA and pilots safely and efficiently under the structure of the unmanned aircraft system within the scope of the regulations. Each country classifies the RPA as an aircraft less than 25kg. Australia and Germany further break down the RPA at a lower weight. ICAO stipulates all general aviation operations, including commercial operation, in accordance with Annex 6 of the Chicago Convention, and it also applies to RPAs operations. However, passenger transportation using RPAs is excluded. If the operational scope of the RPAs includes the airspace of another country, the special permission of the relevant country shall be required 7 days before the flight date with detail flight plan submitted. In accordance with Federal Aviation Regulation 107 in the United States, a small non-leisure RPA may be operated within line-of-sight of a responsible navigator or observer during the day in the speed range up to 161 km/hr (87 knots) and to the height up to 122 m (400 ft) from surface or water. RPA must yield flight path to other aircraft, and is prohibited to load dangerous materials or to operate more than two RPAs at the same time. In Germany, the regulations on UAS except for leisure and sports provide duty to avoidance of airborne collisions and other provisions related to ground safety and individual privacy. Although commercial UAS of 5 kg or less can be freely operated without approval by relaxing the existing regulatory requirements, all the UAS regardless of the weight must be operated below an altitude of 100 meters with continuous monitoring and pilot control. Australia was the first country to regulate unmanned aircraft in 2001, and its regulations have impacts on the unmanned aircraft laws of ICAO, FAA, and EASA. In order to improve the utiliity of unmanned aircraft which is considered to be low risk, the regulation conditions were relaxed through the revision in 2016 by adding the concept "Excluded RPA". In the case of excluded RPA, it can be operated without special permission even for commercial purpose. Furthermore, disscussions on a new standard manual is being conducted for further flexibility of the current regulations.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.149-161
• /
• 2014

The export of domestic public services to overseas markets contains many potential obstacles, stemming from different export procedures, the target services, and socio-economic environments. In order to alleviate these problems, the business incubation platform as an open business ecosystem can be a powerful instrument to support the decisions taken by participants and stakeholders. In this paper, we propose an ontology model and its implementation processes for the business incubation platform with an open and pervasive architecture to support public service exports. For the conceptual model of platform ontology, export case studies are used for requirements analysis. The conceptual model shows the basic structure, with vocabulary and its meaning, the relationship between ontologies, and key attributes. For the implementation and test of the ontology model, the logical structure is edited using Prot$\acute{e}$g$\acute{e}$ editor. The core engine of the business incubation platform is the simulator module, where the various contexts of export businesses should be captured, defined, and shared with other modules through ontologies. It is well-known that an ontology, with which concepts and their relationships are represented using a shared vocabulary, is an efficient and effective tool for organizing meta-information to develop structural frameworks in a particular domain. The proposed model consists of five ontologies derived from a requirements survey of major stakeholders and their operational scenarios: service, requirements, environment, enterprise, and county. The service ontology contains several components that can find and categorize public services through a case analysis of the public service export. Key attributes of the service ontology are composed of categories including objective, requirements, activity, and service. The objective category, which has sub-attributes including operational body (organization) and user, acts as a reference to search and classify public services. The requirements category relates to the functional needs at a particular phase of system (service) design or operation. Sub-attributes of requirements are user, application, platform, architecture, and social overhead. The activity category represents business processes during the operation and maintenance phase. The activity category also has sub-attributes including facility, software, and project unit. The service category, with sub-attributes such as target, time, and place, acts as a reference to sort and classify the public services. The requirements ontology is derived from the basic and common components of public services and target countries. The key attributes of the requirements ontology are business, technology, and constraints. Business requirements represent the needs of processes and activities for public service export; technology represents the technological requirements for the operation of public services; and constraints represent the business law, regulations, or cultural characteristics of the target country. The environment ontology is derived from case studies of target countries for public service operation. Key attributes of the environment ontology are user, requirements, and activity. A user includes stakeholders in public services, from citizens to operators and managers; the requirements attribute represents the managerial and physical needs during operation; the activity attribute represents business processes in detail. The enterprise ontology is introduced from a previous study, and its attributes are activity, organization, strategy, marketing, and time. The country ontology is derived from the demographic and geopolitical analysis of the target country, and its key attributes are economy, social infrastructure, law, regulation, customs, population, location, and development strategies. The priority list for target services for a certain country and/or the priority list for target countries for a certain public services are generated by a matching algorithm. These lists are used as input seeds to simulate the consortium partners, and government's policies and programs. In the simulation, the environmental differences between Korea and the target country can be customized through a gap analysis and work-flow optimization process. When the process gap between Korea and the target country is too large for a single corporation to cover, a consortium is considered an alternative choice, and various alternatives are derived from the capability index of enterprises. For financial packages, a mix of various foreign aid funds can be simulated during this stage. It is expected that the proposed ontology model and the business incubation platform can be used by various participants in the public service export market. It could be especially beneficial to small and medium businesses that have relatively fewer resources and experience with public service export. We also expect that the open and pervasive service architecture in a digital business ecosystem will help stakeholders find new opportunities through information sharing and collaboration on business processes.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.143-152
• /
• 1999

Using a Rheometrics Fluids Spectrometer(RFS II), the steady shear flow and the small-amplitude dynamic viscoelastic properties of three kinds of semi-solid food materials(mayonnaise, tomato ketchup, and wasabi) have been measured over a wide range of shear rates and angular frequencies. The shear rate dependence of steady flow behavior and the angular frequency dependence of dynamic viscoelastic behavior were reported from the experimentally measured data. In addition, some viscoplastic flow models with a yield stress term were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was also examined in detail. Furthermore, the correlations between steady shear flow(nonlinear behavior) and dynamic viscoelastic(linear behavior)properties were discussed using the modified power-law flow equations. Main results obtained from this study can be summarized as follows : (1) Semi-solid food materials are regarded as viscoplastic fluids having a finite magnitude of yield stress, and their flow behavior shows shear-thinning characteristics, exhibiting a decrease in steady flow viscosity with increasing shear rate. (2) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable to describe the steady flow behavior of semi-solid food materials. Among these models, the Heinz-Casson model has the best validity. (3) Semi-solid food materials show a stronger shear-thinning behavior at shear rate region higher than a critical shear rate where a more progressive structure breakdown takes place. (4) Both the storage and loss moduli are increased with increasing angular frequency, but they have a slight dependence on angular frequency. The elastic behavior is dominant to the viscous behavior over a wide range of angular frequencies. (5) All of the steady flow, dynamic, and complex viscosities are well satisfied with the power-law model behavior. The relationships between steady shear flow and dynamic viscoelastic properties can well be described by the modified forms of the power-law flow equations.

• The Korean Journal of Pesticide Science
• /
• v.5 no.3
• /
• pp.1-11
• /
• 2001

New technologies will have a large impact on the discovery of new herbicide site of action. Genomics, combinatorial chemistry, and bioinformatics help take advantage of serendipity through tile sequencing of huge numbers of genes or the synthesis of large numbers of chemical compounds. There are approximately $10^{30}\;to\;10^{50}$ possible molecules in molecular space of which only a fraction have been synthesized. Combining this potential with having access to 50,000 plant genes in the future elevates tile probability of discovering flew herbicidal site of actions. If 0.1, 1.0 or 10% of total genes in a typical plant are valid for herbicide target, a plant with 50,000 genes would provide about 50, 500, and 5,000 targets, respectively. However, only 11 herbicide targets have been identified and commercialized. The successful design of novel herbicides depends on careful consideration of a number of factors including target enzyme selections and validations, inhibitor designs, and the metabolic fates. Biochemical information can be used to identify enzymes which produce lethal phenotypes. The identification of a lethal target site is an important step to this approach. An examination of the characteristics of known targets provides of crucial insight as to the definition of a lethal target. Recently, antisense RNA suppression of an enzyme translation has been used to determine the genes required for toxicity and offers a strategy for identifying lethal target sites. After the identification of a lethal target, detailed knowledge such as the enzyme kinetics and the protein structure may be used to design potent inhibitors. Various types of inhibitors may be designed for a given enzyme. Strategies for the selection of new enzyme targets giving the desired physiological response upon partial inhibition include identification of chemical leads, lethal mutants and the use of antisense technology. Enzyme inhibitors having agrochemical utility can be categorized into six major groups: ground-state analogues, group specific reagents, affinity labels, suicide substrates, reaction intermediate analogues, and extraneous site inhibitors. In this review, examples of each category, and their advantages and disadvantages, will be discussed. The target identification and construction of a potent inhibitor, in itself, may not lead to develop an effective herbicide. The desired in vivo activity, uptake and translocation, and metabolism of the inhibitor should be studied in detail to assess the full potential of the target. Strategies for delivery of the compound to the target enzyme and avoidance of premature detoxification may include a proherbicidal approach, especially when inhibitors are highly charged or when selective detoxification or activation can be exploited. Utilization of differences in detoxification or activation between weeds and crops may lead to enhance selectivity. Without a full appreciation of each of these facets of herbicide design, the chances for success with the target or enzyme-driven approach are reduced.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.420-428
• /
• 2015

The majority of cultivated varieties of grape have perfect flowers that are clustered in an individual inflorescence. Grape flower has a single pistil, five stamens, a protective flower cap (calyptra), and a calyx. After fertilization, an individual flower develops into a single berry. Although there are a number of reported studies focusing on berry formation, berry enlargement, and sugar accumulation in grape, the morphological studies of flower, including gametophyte morphogenesis and structural change in floral organs, have not yet been studied in detail. In this study, we investigated the flower structure and development characteristics of grape using microscopy and defined the floral development stages 9 to 13 based on microspore or male gametophyte development stage from tetrad to mature pollen. We used seeded diploid table grapes 'Campbell Early' (Vitis labruscana) and 'Tamnara' (V. spp.) as plant materials. At floral development stage 9, pollen mother cells develop to tetrads. During floral development stages 10 to 11, unicellular microspore develop to mid bicellular pollen. At the end of floral stage 12, male gametophyte develops to mature tricelluar pollen. In floral stage 13, the flower cap falls off and flower bud opens. During floral development stages 9 to 12, there were no major changes in calyx length, whereas the length of the flower cap continuously increased. The flower cap-to-calyx length ratio was 2.0, 3.0, 4.5, and 6.5 at floral stages 9, 10, 11, and 12, respectively. The flower cap-to-calyx length ratio was consistent in the two grape cultivars, suggesting that the ratio is a morphological character representing floral development stage. This study provides a reference for determining floral development stage of the two grape cultivars. It will be useful for the determination of optimum time for microspore culture needed to generate doubled haploid lines and appropriate gibberellic acid treatment needed to induce parthenocarpic fruit development in 'Tamnara' grape.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.236-256
• /
• 2011

Forest carbon stocks change due to land use change is an important data required by UNFCCC(United Nations framework convention on climate change). Spatially explicit estimation of forest carbon stocks based on IPCC GPG(intergovernmental panel on climate change good practice guidance) tier 3 gives high reliability. But a current estimation which was aggregated from NFI data doesn't have detail forest carbon stocks by polygon or cell. In order to improve an estimation remote sensing and GIS have been used especially in Europe and North America. We divided research trends in main countries into 4 categories such as remote sensing, GIS, geostatistics and environmental modeling considering spatial heterogeneity. The easiest way to apply is combination NFI data with forest type map based on GIS. Considering especially complicated forest structure of Korea, geostatistics is useful to estimate local variation of forest carbon. In addition, fine scale image is good for verification of forest carbon stocks and determination of CDM site. Related domestic researches are still on initial status and forest carbon stocks are mainly estimated using k-nearest neighbor(k-NN). In order to select suitable method for forest in Korea, an applicability of diverse spatial data and algorithm must be considered. Also the comparison between methods is required.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.

• Archives of design research
• /
• v.15 no.4
• /
• pp.57-66
• /
• 2002

With the advanced localization followed by the settlement of the local autonomous systems, every city has faced new realities that it is inevitable to change its environment and image designs which have been uniformly made without consideration of its characteristics. Accordingly, they have failed to effectively achieve the development goal which make them distinctive.. The identity of a city means an image rather than its attribute. It can be drawn only when the city has its own municipality as well as the superiority to others. For Corporate Identity(CI) to function effectively as a comprehensive medium of communication, We should take into consideration all the situations which surround the city. It should be emphasized on the culture and environment oriented image. To do so we first of all have to analyze in detail the current situations and characteristics of the city. Hence, this paper tried to propose the strategies of making the CI which expresses the unique identity and communication of the city applying the CI program which have been used as the way of business management. The creation of the CI of the city takes the following steps. First, find the potentials for the image of the city through the survey of its resources. Second, provide the motive for citizens to actively participate in making plans with a dear vision for the improvement of the city image, physical development and so on. Third, provide with the events and the projects for specialized goods of the city to strengthen the ability of delivering the information, to design the city image and the street environment of the city. Fourth, apply the communication design system to use actively the administration organization, to enhance the citizenship, and to differentiate the city image. To do so, a variety of efforts should be followed to integrate and promote the regional culture, develope the structure and the facility functions of the city connecting those factors effectively. The establishment of the city identity is required a variety of activities to make the environment of the city, and the agreeable residential environment for a better life by differentiating the characteristics the city has.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.221-238
• /
• 2005

This study analyzed the contents of the milk-related nutrition education currently found in elementary and secondary school textbooks. An attempt was made to develop the basic data needed to in the future provide students with pertinent in formation regarding the nutritional attributes of milk, as well as the desired consumption behavior, within the school education system. To attain the objectives of this study, the researcher analyzed the contents of the milk-related nutrition education described in elementary and secondary school textbooks(1st-10th grades). Based on the results of this analysis, measures were developed to organize the contents of the milk-related nutrition education that should be taught within the school education system. At the elementary school level, milk-related nutrition education was included in the textbooks for the integrated curriculum for the lower grades, as well as in the science, practical arts, and physical education textbooks for every grade, except the End and the 6th. The practical arts textbook, which contained basic knowledge related to the nutritional attributes of milk and the proper method in which to intake milk, was found to be the one which dealt with milk-related nutrition education in the most detail. At the secondary school level. milk-related nutrition education was included in the 7th-10th grade textbooks for the science, technology and home economics, and physical education courses. In this instance. the technology and home economics textbooks were the ones which were found to contain the most milk-related nutrition education covering such aspects as the nutritional attributes of milk, the special characteristics of milk as a food. how to select and store milk. as well as how to use milk as part of a balanced diet in everyday life. However, as was the case at the elementary school levet the repetitious nature of the milk-related contents found in the textbooks for various school subjects and at different school levels, as well as the inefficient hierarchical structure in which the knowledge is presented, were identified as key problems. There is a need to establish the appropriate milk-related nutrition education for each school level. The need to develop education programs, which could be linked to the school subjects and special milk programs, was also emphasized.