• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.691-700
• /
• 2008

Contemporary architectural structures have diverse and complex forms. Such structural variety demands requisite performance from the connections in the steel structure so that the latter could resist a horizontal force, such as an earthquake. The connections are the all-important components that create the discontinuous form and that support stress concentration, determining the stiffness and toughness of the entire steel frame. In this study, a real-scale column-to-beam connection was constructed in the 600MPa-grade high-strength and high-performance steel, to test its behavior. Its material and welding characteristics were examined in this study, and its structural performance was analyzed by conducting seismic-resistance tests on the full-scale, cross-shaped column-to-beam welded connections with non-scallop, ordinary-scallop, and reinforced-scallop details. The weld ability of the high-strength, high-performance steel was also evaluated, and data regarding the seismic design for practical application were provided.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.17-24
• /
• 2018

This paper presents a numerical analysis of flow inside a water nozzle for fire fighting and observes the effect of the variation in primary components on internal flow. In order to observe the performance of water nozzles, they have been systematically designed and modelled, applying boundary conditions obtained from field experiments (inlet pressure at pump : 4 bar, and pressure outlet : atmospheric pressure). In addition, the governing equations were calculated to obtain velocity, pressure inside the nozzle. Two main parameters (the presence and length of sub-pipes) were considered with the aim to observe the detail internal flow characteristics. It is found that the base model is not significant on flow characteristics, but a negative effect (i. e. the reverse flow) at the entrance region of sub-pipe. On the other hand, the reverse flow was vanished when making the length of sub-pipe double.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.153-158
• /
• 1998

Since the mid-1990′s, researches on 3D GIS have been regarded as one of main issues both in the academic sites and commercial vendors; recently, some prototyped systems or the first versioned software systems of commercial basis are being reported and released. Unlike conventional 2D GIS, which consists in intelligent structured GIS or desktop GIS, every 3D GIS has its own distinguished features according to data structure-supporting capability, GIS-styled functionality, external database accessibility, interfacing extents with 2D GIS, 3D visualization/texture mapping ability, and so forth. In this study, technical aspects related to system development, SERI-Web3D GIS ver. 1.2, are explained. Main features in this revised 3D GIS can be summarized: 2-tier system model(client-server), VGFF(Virtual GIS File Format), internal GIS import, Feature manager(zoning, layering, visualization evironment), Scene manager(manage 3D geographic world), Scene editor, Spatial analyzer(Intersect, Buffering, Network analysis), VRML exporter. While, most other 3D GISes or cartographic mapping systems may be categorized into 3D visualization systems handling terrain height-field processing, 2D GIS extension modules, or 3D geometric feature generation system using orthophoto image: actually, these are eventually considered as several parts of "real 3D GIS". As well as these things, other components, especially web-based 3D GIS, are being implemented in this study: Surface/feature integration, Java/VRML linkage, Mesh/Grid problem, LOD(Level of Detail)/Tiling, Public access security problem, 3-tier architecture extension, Surface handling strategy for VRML.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.95-106
• /
• 2002

Soybean is one of the most important sources of protein and oil in the world. Recently, emphasis has been laid on the chemical composition of soybean seeds for the processing soybean foods. Improvement of soybean components has been expected to improve food-processing quality for the processed soybean products such as soymilk and various edible ingredients as well as fur the traditional soyfoods. In Korea, soybean breeding research programmes have been focused on the quality of the products derived from soybean with yield stability, and some new modified soybean varieties haying good food-processing quality were developed recently. So the efforts of establishing standard and standardization of products in soybean are important. Three main categories should be considered in view of soybean seed quality; the marketing value such as grain size, shape, and appearance; the eating and processing value such as dehulled ratio, water absorption rate, and benny flavor; the nutritional value such as protein, lipid, and carbohydrate contents. And the new frontiers in research are looking at the functional nutrients in soybeans and how to improve them. In case marketing value, mainly the appearance is evaluated, therefore, each country has an application of standard related to quality. Each determination of standard class, heat-damaged kernels, splits, and soybeans of other colors is made on the basis of the grain when free from foreign materials. But processing value and nutritional value for standardization were not studied in detail till now. In addition, soybean has potential roles in the prevention and treatment of chronic diseases, most notably cancer, osteoporosis, and heart disease. The functional nutrients include a protease inhibitor, phytic acid, saponins, and isoflavones, etc.. It is believed that standardization of soybean quality should perform to overcome the difficulties, relatively high price of domestic soybean products has weakened the competitive power, in the market related to WTO. So, we should focus on further research into the evaluation and establishment of quality-standard in soybean.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.18-25
• /
• 2006

In order to perform system requirements quickly and accurately, an automatic design program of solid rocket motors(SRM) structure designated as the 'ProDes software' has been developed and verified. from given system design criteria and constraints, it has the capabilities to design, analysis, simulation and drawing process to greatly reduce the over 'design cycle time' and manpower of a project. The conception of the program is modular, and calculations are performed step by step allowing parametric design studies and providing final selected design goal. Each configurations of SRM components and joint types composed of various master models is obtained from the data base module of the library. Between the design results of the ProDes software and those of the previous detail design of the established motor showed good agreements.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.330-335
• /
• 2012

Brushless doubly-fed machine (BDFM) doesn't use brush and slip ring, and has advantages such as high system reliability, small capacity of its frequency converter, low system cost, adjustable power factor and speed, etc. At the same time, it has good applicable potentials on the variable frequency motors and the variable speed constant frequency generators. However, due to the complicacy and particularity of BDFM in the structure and operating mechanism, the effect of magnetic field modulation directly influences the operating efficiency of BDFM. To study the effect of different cage rotor structures on the magnetic field modulation of BDFM, the rotor magnetomotive force (MMF) of BDFM with cage rotor is studied by the analytical method. The components and features of rotor harmonic MMFs are discussed. At the same time, the method to weaken the higher harmonics is analyzed by the theoretic formulae. Furthermore, the magnetic field modulation mechanism is expounded on in detail and the relationship between the magnetic field modulation effect and the operating efficiency of BDFM is established. And then, a new method for estimating the magnetic field modulation effect is proposed. At last, the magnetic field modulation effects of four BDFM prototypes with different cage rotor structures are compared by the MMF analysis and the efficiency data of electromagnetic design. The results verify the effectiveness of the new method for estimating the magnetic field modulation effect of BDFM with cage rotor.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.334-348
• /
• 2002

In this study we have developed programs to enhance the scientific creativity by reviewing literature on the creativity and analyzing the theoretical models related to gifted education. The scientific creativity is regarded as the process of problem solving and problem finding, in particular, solving and finding the ill-defined but significant problems. In general, the important components of the scientific creativity are considered as the scientific knowledge, process skill, divergent/critical thinking, ill-defined problem, and problem finding. The program developed for the purpose of the study is composed of three stages based on Renzulli's model : general exploratory activities, group training activities and individual and small group investigations of real problems. The developed program in this study consists of 4 themes, 15 school hours in the earth science area. The process and products of the program development as well as the background of the present research are described and discussed in detail.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.146-158
• /
• 1991

The flow around a two-dimensional foil section Is measured by a LDV(Laser Doppler Velocimetry) system which is capable of measuring the datailed flow field without interfering the original flow field. A 2-color 3-beam LDV system, which is capable of mea,;tiring 2 velocity components simultaneously and uses 2W Ar-Ion laser source, is used to measure the flow field around an NACA0012 foil section. The measured flow velocities are analysed iii order to study the boundary layer characteristics, flow separation and the detail structure of the flow near the trailing edge of the foil. The boundary layer characteristics are compared with the results by the head's momentum integral method. For the case of small angle of attack at relatively higher Reynolds number, both results show good agreements. The measured data of the velocity field around an NACA0012 foil section would be valuable data to validate the CFD(Computational Fluid Dynamic) calculation results. The developed experimental technique to evaluate the characteristics of two-dimensional foil sections is essential tool to develope new blade sections which have good lift characteristics and better cavitation performances.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.101-109
• /
• 2011

M&S in the field of national defense is a battle system has been highly spotlighted for obtaining weapon systems, analyzing and experimentation of battle effects to reduce costs, time, and risks. It is classified as Campaign, Mission, Engagement, and Engineering levels by detail of description. In engagements, many situations on the battle field which are really unpredictable are required to be considered on the view of diverse tactics. Thus, engagement simulation is in demand to use for forecasting real-world battle situations by inserting various components which consists of real engaging situations into virtual local battle field. While developing the engagement simulation, adopting the concept of agent-based simulation gives it benefits which are improved autonomy, composability, and reusability of entities. It means reducing the time, cost and effort to develop the simulations. This paper concentrates on the framework of multi-agent based engagement simulation using Cougaar Architecture.

• Journal of the Economic Geographical Society of Korea
• /
• v.4 no.1
• /
• pp.19-35
• /
• 2001

This paper is concerned with the relationships between large firms with global reaches in their markets and subcontracting firms, mostly small and medium-sized firms. It then attempts to focus in more detail on the dynamic relational dimensions between the two. In doing so, we draw upon the secondary data and the results of interviewing survey with some senior managers. The empirical study shows that the localisation of subcontracting networks have been increasingly reinforced thanks to the increasing tendency of vertical disintegration by LC. However, it is identified that there is a tendency that local subcontractors are specialised in producing relatively low value-added and low technology-intensive electronic parts/components. Based on these results, the author suggests the implications of regional economic development in the context of innovation and learning.