• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.107-113
• /
• 2004

This study presents a development of DeCatS(Detail Design of High Speed Catenary System) which is a software to design high speed catenary system automatically. The program is developed by Korea Railroad Research Institute with the support of KHSR. A process of developing it and a comparison with LEXCAT. in order to demonstrate a preciseness of that, were performed. In the program, decision of H-beam, cantilever fitting, management of materials, automatic drawing and etc. according to input conditions can be accomplished. In this study, especially the program algorithm for the decision of mast was introduced.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.215-219
• /
• 1999

This study aims to make detail examination of smallholder dairy farming systems in the Nongpho Dairy Cooperative. Forty-three dairy farms were selected from three geographical areas i.e. irrigated area, municipality area, and factory area. Within each area some number of sample farms were selected from each of the three levels of farm and animal crowdedness (very crowded, crowded, and not crowded farms). Detail data were collected during 1996 to 1997, they were socio-economic conditions of the sample farms and farmers, dairy production systems and management of resources (animals, bam, feeds, stocking rates, herd structure, animal body conditions, milk yield and milk quality, manure and farm wastes management, and other related items). Detail information useful for the improvement of farm production efficiency were discussed. It was very clear that much improvement of smallholder dairy production can be achieved if the recommendations given by this study were implemented.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2005.06a
• /
• pp.54-62
• /
• 2005

While genomics (the set of experimental and computational tools that allows the blueprints of life to be read) opens the doors to a more rational approach to the design and use of living cells to bring about desirable chemical transformations, genomics is, by itself, insufficient. We need tools that allow us to relate genomic and molecular information to cellular physiology and then to the response of a population of cells. We propose the development of hybrid computer cellular models. In such models genomics and chemical detail for a cellular subsystem (e.g. pathogenesis) is embedded in a coarse-grain cell model. Such a construct allows the quantitative and explicit linkage of genomic detail to cell physiology to the extracellular environment. To illustrate the principles involved we are constructing a model for a minimal cell. A minimal cell is a bacterial cell with the fewest number of genes necessary to sustain life as a free living microbe.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.763-768
• /
• 2007

In construction of RC buildings, the quality of shop and detail drawings is very essential for the quality and safety of buildings, Nevertheless, most of thess works are left to site workers and the requirements about bar detailing such as anchorage and splice have been done without rational design and engineering. The purpose of this research is to develop a computer aided drawing system of rebars for RC buildings. The system is based on an integrated structural design system, that is SDP. SDP manages an engineering database for structural design information. It provides all the information needed to draw rebar drawings. The drawing system consists of three modules, 1) Structural Plan Drawing System, 2) Shop Drawing System, and 3) Detail Drawing System. It is expected that not only the productivity of detail drawing works but also the quality and safety of buildings will be improved using the rebar drawing system developed in this research.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.23-30
• /
• 2016

In this paper, we propose an adaptive histogram projection technique for dynamic range compression and an efficient detail enhancement method which is enhancing strong edge while reducing noise. First, The high dynamic range image is divided into low-pass component and high-pass component by applying 'guided image filtering'. After applying 'guided filter' to high dynamic range image, second, the low-pass component of the image is compressed into 8-bit with the adaptive histogram projection technique which is using global standard deviation value of whole image. Third, the high-pass component of the image adaptively reduces noise and intensifies the strong edges using standard deviation value in local path of the guided filter. Lastly, the monitor display image is summed up with the compressed low-pass component and the edge-intensified high-pass component. At the end of this paper, the experimental result show that the suggested technique can be applied properly to the IR images of various scenes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.101-104
• /
• 2004

Composite beams are generally known to possess higher flexural stiffness and strength under the positive bending moments than the normal steel beams. However the these beams also exhibit large differences in flexural stiffness and strength when both positive and negative bending moments are applied. As observed during the 1995 Kobe Earthquake, these beams tend to be fractured on the bottom flanges under repeated cyclic loadings. The objective of this study is to develop and evaluate the composite beam detail, which is able to effectively resist the seismic loadings. The proposed system is composed of the slit on concrete slab around column. A limited experimental program was designed and conducted to investigate the hysteretic behavior of the proposed composite beam system. From the experimental data obtained from the testing of three specimens, the proposed composite beam detail is found to possess large beam rotation than normal steel beams.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.45-51
• /
• 2002

The goal of image merging techniques are to enhance the resolution of low-resolution images using the detail information of the high-resolution images. Among the several image merging methods, wavelet-based image merging techniques have the advantages of efficient decorrelation of image bands and time-scale analysis. However, they have no regard for spatial information between the bands. In other words, multiresolution data merging methods merge the same information-the detail information of panchromatic image-with other band images, without considering specific characteristics. Therefore, a merged image contains much unnecessary information. In this paper, we discussed this 'mixing' effect and, proposed a method to classify the detail information of the panchromatic image according to the spatial and spectral characteristics, and to minimize distortion of the merged image.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.446-448
• /
• 1995

This paper dscribes a detail simulation model with EMTP (Electro-Magnetic Transients Program) which is very effective to analyze the interaction between the ac transmission line and STATCON (static condenser). The SATCON was represented by two voltage-source converters connected in parallel and sharing an energy storage dc capacitor bank. The voltage source converters was modeled with ideal gate turn-off switches. The power system was represented by a detail generator model and a distributed tramnsmission line model for detail performance analyses. Analysis results show that the conceived simulation model is very effective to analyze the interaction between the ac transmission line and STATCON, and to evaluate the performance of STATCON.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.3
• /
• pp.61-68
• /
• 2021

In this study, a rocking behavior experiment using a guide plate and a guide channel to prevent lateral deformation of a steel damper was planned. For this purpose, strut I-type specimen I-1 and strut S-type specimen S-1 were prepared. The experimental results were compared with the existing experimental results of SI-260 and SS-260 under the same conditions without the details of lateral deformation prevention in order to evaluate the effect of preventing lateral deformation. The damper with lateral deformation prevention detail was evaluated to have superior strength capacity, deformation capacity, and energy dissipation capacity than the damper without it. Therefore, the lateral deformation prevention detail was evaluated to have a good effect in improving the design capability of the steel damper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.392-393
• /
• 2022

In relation to the creation of an avatar that will become the main character in the metaverse environment, we design a system that automatically determines the shape of the avatar according to the situation and location by adjusting the details between immersion and privacy. In this study, as a way to control immersion in various virtual environments of the metaverse environment, we derive the hypothesis that immersion is determined by how detailed the original object is expressed. We conduct research that can adaptively control the expression information of avatars.