• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1067-1072
• /
• 2002

A new polystyrene-divinylbenzene resin containing 2-(2-thiazolylazo)-5-dimethylamino-phenol (TAM) functional groups has been synthesized and its sorption behavior for nineteen metal ions, including Zr(Ⅳ),Hf(Ⅳ) and U(Ⅵ) has been investigated by batch and column methods. The chelating resin showed high sorption affinity for Zr(Ⅳ) at pH 1-5 and U(Ⅵ) at pH 4. Some parameters affecting the sorption of the metal ions have been detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(Ⅳ), Th(Ⅳ) and U(Ⅵ), which showed higher than the other metal ions, were 0.90,0.84 and 0.80 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as Zr(Ⅳ) > Th(Ⅳ) > U(Ⅵ) > Cu(Ⅱ) > Hf(Ⅳ) > W(Ⅵ) > Mo(Ⅵ) > In(Ⅲ) > Sn(Ⅳ) > Cr(Ⅲ) > V(Ⅴ) > Fe(Ⅲ). Quantitative recovery of most metal ions except Zr(Ⅳ) was achieved using 2M HNO3. Desorption and recovery of Zr(Ⅳ) was successfully performed with 2 M HClO4 and 2 M HCl.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1075-1078
• /
• 2005

Hydrogen adsorption on various porous materials have been studied with a volumetric method at low temperature in the pressure of 0-760 torr. Their hydrogen uptakes depend at least partly on microporosity rather than total porosity. However, it is also necessary to consider other parameters such as pore size and pore architecture to explain the adsorption capacity. The heat of adsorption and adsorption-desorption-readsorption experiments show that the hydrogen adsorption over the porous materials are composed of physisorption with negligible contribution of chemisorption. Among the porous materials studied in this work, SAPO-34 has the highest adsorption capacity of 160 mL/g at 77 K and 1 atm probably due to high micropore surface area, micropore volume and narrow pore diameter.

• 한국환경과학회지
• /
• 제13권10호
• /
• pp.903-909
• /
• 2004

A new method based on solid phase microextraction(SPME), coupled with GC/FID, has been developed for the determination of PCE and TCE in water samples. The experimental parameters affecting the SPME process (i.e, kinds of fibers, extraction time, desorption time, extraction temperature, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. The coefficients of determination ($R^2$) for PCE and TCE were 0.9951 and 0.9831, respectively when analytes concentration ranges from 10 to 300$\mu$g/L. The relative standard deviations were 3.4 and $2.1\%$ for concentration of 10$\mu$g/L(n=5), respectively. The detection limits of PCE and TCE were 0.5 and l.3$\mu$g/L, respectively.

• 농업과학연구
• /
• 제27권2호
• /
• pp.135-140
• /
• 2000

토양내에서 황산이온의 이동성은 산화환원전위, 토양광물 특성, pH, 그리고 환산이온과 토양입자 표면에 흡착에 관여하는 타 음이온들에 의해 영향을 받는다고 알려져 있 다. 제시된 황산이온의 흡착 기작은 토양입자 표면과 수용성상태의 음이온간의 상관 관계를 나타낸 것이다. 그러므로 흡 탈착연구로 부터 얻어진 적정한 계수를 적용함으로서 다중 이온이 존재하는 토양내에서의 일반적 등온흡착 곡선을 적용할 수 있는 이 동모형은 실험적 접근 방법을 수용하게 된다.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.138-144
• /
• 2001

This study was carried out to investigate characteristics and Pb(II) removal effect of natural clays in the batch mode test. The effect of parameters such as temperature, adsorption time and coexisting cations on the sorption ability and characteristics was investigated to find out whether the clays could be used as adsorbents. Several natural clays from domestic have been investigated to have high specific surface area and have minerals such as SiO$_2$ and $Al_2$O$_3$. As a result, removal effects of Pb(II) on clays were reached at equilibrium in aqueous solutions by stirring about 20 minutes. The removal effect of Pb(II) was best for Kang Jin clay than other clays in terms of fixed time. Adsorption efficiency was not influenced by the possibility of continuous treatment system of wastewater which contain heavy metals by using natural clays from domestic.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.146-150
• /
• 2021

Plasma information based virtual metrology (PI-VM) that predicts wafer-to-wafer etch rate variation after wet cleaning of plasma facing parts was developed. As input parameters, plasma information (PI) variables such as electron temperature, fluorine density and hydrogen density were extracted from optical emission spectroscopy (OES) data for etch plasma. The PI-VM model was trained by stepwise variable selection method and multi-linear regression method. The expected etch rate by PI-VM showed high correlation coefficient with measured etch rate from SEM image analysis. The PI-VM model revealed that the root cause of etch rate variation after the wet cleaning was desorption of hydrogen from the cleaned parts as hydrogen combined with fluorine and decreased etchant density and etch rate.

• 분석과학
• /
• 제21권4호
• /
• pp.259-271
• /
• 2008

혈액 내에 축적되어 있는 유기염소계 농약을 분석하기 위한 방법으로 기존에는 액체-액체 추출법과 고체상 추출법을 많이 사용하였으나 정제 및 많은 양의 시료 처리에 한계가 있다. 이를 극복하기 위한 방법으로 시료양이 적으며 간편한 고체상미량추출법을 사용하여 혈액 중 18종의 유기염소계 농약의 최적 추출법을 연구하였다. 흡착조건(fiber type, 흡착시간, 흡착온도, 염석효과)과 탈착조건(탈착시간, 탈착온도) 등 최적의 추출을 위해 여러 가지의 실험조건 등을 검토한 결과, fiber는 polyacrylate $85{\mu}m$, 흡착시간은 50분, 흡착온도는 $80^{\circ}C$, 염석효과는 NaCl 0.1 g, 탈착시간은 5분, 탈착온도는 $280^{\circ}C$에서 최적임을 확인하였다. 정확도, 정밀도 및 검출한계에 대한 타당성을 최적 실험조건에서 조사한 결과, 검출한계는 0.05~0.20 ng/mL, 정밀도는 5.59~13.39%, 정확도는 -0.5%~24.5%의 범위인 것으로 확인되었다.

• 한국지반환경공학회 논문집
• /
• 제11권5호
• /
• pp.61-67
• /
• 2010

본 연구는 GC/FID에서 염화유기용제(PCE와 TCE)와 그 부산물(cis-DCE, VC, 그리고 Ethylene)의 분석을 위하여 액-액추출법의 대안인 SPME방법을 연구하였다. 실험인자로써 fiber의 종류, 흡착 및 탈착시간, headspace의 부피, 염석효과, 그리고 교반효과에 대하여 실험을 실시하였다. 염화유기용제와 부산물의 분석을 위하여 fiber는 CAR/PDMS, 흡착과 탈착시간은 $250^{\circ}C$에서 20분과 5분, 염첨가량 25%와 교반이 병행되었을 때에 최적의 분석조건으로 도출되었다. CAR/PDMS fiber에서 분석물의 추출감도는 PCE>TCE>cis-DCE>VC>Ethylene순으로 조사되었다. 염화유기용제와 부산물의 농도 $10{\mu}g/L$에서 $500{\mu}g/L$까지의 직선상의 상관계수($R^2$)는 0.912에서 0.999로 조사되었으며, $500{\mu}g/L$(5회 분석)일 때에 상대표준편차(% RSD)는 2.1%에서 3.6%로 나타났다. 마지막으로 본 연구에서 염화유기용제와 부산물의 검출한계(LOD)는 $0.5{\mu}g/L$에서 $10{\mu}g/L$로 관측되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.179-191
• /
• 2016

In addition to the measurement of the concentration of soil contaminants, the new idea of indicative parameters was proposed to validate the remedial works through the monitoring for the changes of soil characteristics after applying the clean up technologies. The parameters like CFU (colony forming unit), pH and soil texture were recommended as indicative parameters for land farming. In case of soil washing, water content and the particle size distribution of the sludge were recommended as indicative parameters. The sludge is produced through the particle separation process in soil washing and it is usually treated as a waste. The parameters like water content, organic matter content, CEC (cation exchange capacity) and CFU were recommended as indicative parameters for the low temperature thermal desorption method. Besides the indicative parameter, sampling methods in stock pile and the optimal minimum amount of composite soil sample were proposed. The rates of sampling error in regular grid, zigzag, four bearing, random grid methods were 17.3%, 17.6%, 17.2% and 16.5% respectively. The random grid method showed the minimum sampling error among the 4 kinds of sampling methods although the differences in sampling errors were very little. Therefore the random grid method was recommended as an appropriate sampling method in stock pile. It was not possible to propose a value of optimal minimum amount of composite soil sample based on the real analytical data due to the dynamic variation of $CV_{fund{\cdot}error}$. Instead of this, 355 g of soil was recommended for the optimal minimum amount of composite soil sample under the assumption of ISO 10381-8.

• 대한화학회지
• /
• 제58권5호
• /
• pp.437-444
• /
• 2014

변전위법과 전기화학적 임피던스측정법(electrochemical impedence spectroscopy)을 이용하여 borate 완충용액에서 Co-RDE의 전기화학적 부식과 부동화에 대하여 조사하였다. Tafel 기울기, 코발트 회전원판전극의 회전속도, 임피던스 그리고 부식전위와 부식전류의 pH 의존성으로부터 코발트의 부식과 부동화 반응 메커니즘과 환원반응에서의 수소 발생 반응구조를 제안하였다. EIS data로부터 등가회로를 제안하였으며 산화반응의 영역별로 전기화학적 변수들을 측정하였다. 부식전위에서 측정된 Nyquist plot의 induction loop가 낮은 주파수 영역에서 관측되는 것으로 보아 흡착/탈착 현상이 Co의 부식과정에 영향을 미치는 것으로 보인다.