• 한국연초학회지
• /
• 제35권1호
• /
• pp.7-12
• /
• 2013

A Solid-phase micro extraction(SPME) was evaluated as a tool for headspace sampling of tobacco samples. Several experimental parameters (sampling temperature, pH, and type of SPME fibers) were optimized to improve sampling efficiency in two aspects ; maximum adsorption and selective adsorption of volatile organic acids onto SPME fibers. Among four types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate), Car/PDMS (Carboxen/Polydimethylsiioxane) and PDMS/DVB(Polydimethylsiioxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency. A variety of tobacco samples such as flue cured, burley and oriental were used in this study. The effect of these parameters was often dominated by the physical and chemical nature (volatility, polarity) of target compounds. This method allowed us to make important improvements in selectivity and sensitivity. The Car/PDMS fiber was shown to be the most efficient at extracting the 10 selected volatile organic acids. The parameters were optimized: $80^{\circ}C$ adsorption temperature, 30 min of adsorption time, $240^{\circ}C$ desorption temperature, 1 min of adsorption time.

• 한국환경농학회지
• /
• 제25권4호
• /
• pp.306-315
• /
• 2006

강우에 의한 경사지 토양으로부터의 농약 유출양상을 파악하고 그에 대한 농약의 특성, 환경적 요인 및 영농방법 등의 영향 정도를 평가하기 위하여 토양흡착실험과 인공강우유출실험을 수행하였다. 흡착실험을 수행하여 농약의 이동 가능성과 이동형태를 파악하고 인공강우시설을 이용한 유출실험으로 강우양상 및 경사도의 영향 정도를 파악하여 농약의 표면유출에 의한 유실 수준을 평가하고자 하였다. 각 농약의 Freundlich 흡착계수 K는 ethoprophos $1.2{\sim}2.2$, alachlor $1.5{\sim}2.6$, ethalfluralin $56{\sim}94$ 및 pendimethalin $104{\sim}189$ 순이었다. 일반적인 흡착실험 방법인 용액에 존재하는 농약을 토양에 흡착시키는 방법보다 농약을 토양에 혼화처리한 후 탈착시키는 방법에서 흡착계수 값이 높았고, Freundlich 등온흡착식의 직선성을 나타내는 1/n 값은 탈착방법의 경우 $0.96{\sim}1.02$이었고 흡착방법의 경우는 $0.87{\sim}1.02$로 나타나 탈착방법에 의한 흡착계수 측정방법이 물질의 처리농도에 의하여 영향을 적게 받는 것으로 확인되었다. 영국 SSLRC의 이동성 분류기준으로 판단하면 alachlor와 ethoprophos는 moderately mobile$(75{\leq}Koc<500)$ 등급에 해당하였으며, ethalfluralin 및 pendimethalin은 Koc 4000을 초과하여 non-mobile 등급에 속하였다. 인공강우 처리구의 유출수 및 유실토양에 의한 농약 유실율은 각각 alachlor $1.0{\sim}6.4%$ 및 $0.3{\sim}1.2%,\;ethalfluralin\;1.0{\sim}2.5%$ 및 $1.7{\sim}10.1%,\;pendimethalin\;1.3{\sim}2.9%$ 및 $3.8{\sim}10.8%,\;ethoprophos\;0.6{\sim}2.7%$ 및 $0.1{\sim}0.3%$이었다. 인공강우실험 후 공약의 토심별 분포를 살펴 본 결과 alachlor와 ethopropho는 토심 $10{\sim}15cm$까지 이동하였고, ethalfluralin과 pendimethalin는 대부분 토심 5 cm 이내에 잔류하였다. 경사도 30%의 경우가 10%에 비하여 각 농약의 유실량이 $0.2{\sim}1.9$ 배 증가하였는데 유출수에 의한 농약의 유실량 차이는 유출수 중 농도 차이로 판단되며, 유실토양에 의한 농약 유실량 차이는 토양 유실량과 관계되는 것으로 생각되었다. 농약의 강우에 의한 유실은 복잡하게 작용하는 많은 환경적 요인에 의하여 영향을 받지만 정교하게 구성된 환경 시나리오에 의하여 예측 가능할 것으로 판단되었다.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.181-189
• /
• 2008

GaAs film growth process from trimethylgallium(TMGa) and tertiary-butylarsine(TBAs) using a horizontal MOCVD reactor was numerically studied to explain the experimental result that the decreasing surface reaction rate as the increasing partial pressure of group III species. Using the non-linear model based on the Langmuir isotherm which considers the adsorption and desorption of molecules, film deposition over the entire reactor scale was predicted by computational fluid dynamics (CFD) with the aid of the parameters obtained from the selective area growth (SAG) technique. CFD Results using the non-linear surface reaction model with the parameters determined from the SAG experiments predicted too high film growth rate compared to the measured values at the downstream region where the temperature was decreased abruptly. The pairs of ($k_s^n$, K) from the numerical simulations was $(2.52{\times}10K^{-6}mol/m^2/s,\;1.6{\times}10^5m^3/mol)$, whereas the experimentally determined was $(3.58{\times}10^{-5}mol/m^2/s,\;6.9{\times}10^5m^3/mol)$.

• 한국지구과학회지
• /
• 제42권4호
• /
• pp.390-400
• /
• 2021

Ocean biogeochemistry plays a crucial role in sustaining the marine ecosystem and global carbon cycle. To investigate the oceanic biogeochemical responses to iron parameters in the tropical Pacific, we conducted sensitivity experiments using the Nucleus for European Modelling of the Ocean-Tracers of Ocean Phytoplankton with Allometric Zooplankton (NEMO-TOPAZ) model. Compared to observations, the NEMO-TOPAZ model overestimated the concentrations of chlorophyll and dissolved iron (DFe). The sensitivity tests showed that with increasing (+50%) iron scavenging rates, chlorophyll concentrations in the tropical Pacific were reduced by approximately 16%. The bias in DFe also decreased by approximately 7%; however, the sea surface temperature was not affected. As such, these results can facilitate the development of the model tuning strategy to improve ocean biogeochemical performance using the NEMO-TOPAZ model.

• 산업식품공학
• /
• 제14권4호
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.

• Advances in environmental research
• /
• 제12권1호
• /
• pp.17-40
• /
• 2023

This article presents studies of the adsorption process in a continuous system of fluoride solutions at a concentration of 30 mg/L using a bone char packed in fixed-bed columns, as well as regeneration studies in the same system using HNO₃, HCl and NaOH at 0.01, 0.1 and 1 M. The Thomas Model, Artificial Neural Networks (ANNs), Numerical Integration and Mass Transfer Zone were used for the modeling of asyemmetrical breakthrough curves obtained from the fluoride adsorption on bone char. The maximum adsorption capacity of the breakthrough curves was estimated, and various design parameters of the columns were obtained for the different operating conditions. Results showed that an improvement in the modeling capabilities of the Thomas model can be obtained using ANNs. Moreover, ANNs are useful for determining reasonable and accurate design parameters of packed-bed adsorption columns. This modeling approach can be useful for the process system engineering of dynamic adsorption systems involved in the field of water treatment and purification. It is important to highlight that the obtained results indicate that, when using HCl or HNO₃ at a concentration of 0.1 M, a large number of adsorption-desorption cycles are obtained and, therefore, the highest values of adsorption capacity, which leads to a reduction in operation costs.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.173-184
• /
• 1990

본 연구에서는 활성슬러지 하수처리장에 유입된 PAHs의 일종인 anthracene을 대상으로 이의 농도분포, 물리적 혹은 생물학적 변환을 예측하기 위한 수학적 모형을 제안하였다. 이 수학적 모형은 유입 anthracene의 volatilization, biodegradation 및 adsorption/desorption과 같은 반응을 고려한 5개의 연립미분방정식으로 구성되어 있으며, 이들에는 7개의 kinetic rate constants와 18개의 input variables를 포함하고 있다. Steady state simulation의 결과 유입된 anthracene은 1차 침전지에서의 슬러지 배출로 인하여 약 33%가 포기조에서 발생한 volatilization에 의하여 약 61%가 제거되어, 총괄적인 anthracene의 제거율은 약 97%정도이었다. Dynamic simulation의 결과로 본 연구대상 system의 경우에 system이 steady state에 도달하는 시간은 약 160시간 정도로 예측되었다. 이와 아울러 본 연구에서 제안된 수학적 모형의 활용 가능성이 각종 simulation의 결과로 비교적 구체적으로 규명되었다.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.61-67
• /
• 1997

미생물에 의한 흡착법으로 중금속을 효과적으로 제거, 회수할 수 있다. 알콜 발효 후 부산물로 생성되는 폐 Saccharomyces cerevisiae는 비교적 가격이 저렴하고, 중금속 생체흡착에 유용한 자원으로 이용될 수 있다. 생체흡착 실험에 사용된 미생물은 부유 및 alginate에 고정화된 S. cerevisiae로 수행하였다. 회분식 실험에서 생체흡착량은 Pb > Cu > Cd의 순으로 이루어졌다. Pb 이온의 흡착 평형은 Freundlich와 Langinuir 모델로 설명하였고, Freundlich 모델이 실험자 료와 잘 부합되었다 고정화된 S. cerevisiae를 이용한 혼합용액( Pb, Cu, Cr 및 Cd )흡착 실험에서 각 중금속들은 선택적 흡착 특성을 나타내었다. 고정화 미생물을 고정층 반응기에 충진하여 혼합 중금속 용액의 생체흡착 실험을 수행한 결과 Pb 이온이 가장 많이 흡착을 하였다. 고정화된 미생물에 흡착된 Pb의 탈착실험에서 0.1M의 HCI 및 $H_2SO_4$가 효과적이었다.