• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.164-171
• /
• 1999

An optimum blank design technology is required for near-net of net-shape cold forming using sheets. Originally, the backward tracing scheme has been developed for preform design in bulk forming, and applied to several forming processes successfully. Its key concept is to trace backward from the final desirable configuration to an intermediate preform of initial blocker. A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracing simulation, has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping, the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup product without machining after forming. Another general application appears in the blank design of a cup stamping with protruding flanges, one of typical automobile components. The blank configurations derived by backward tracing simulation have been confirmed by a series of loading simulations. The approach or decision of an initial blank configuration presented in this study will be a milestone in fields of sheet forming process design.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.1
• /
• pp.15-22
• /
• 1990

The purpose of this study is to suggest possibility to analyze the three-dimensional positions of the whole surface of an object simultaneously and precisely by close-range photogrammetry. For this purpose, the geometry of network, namely imaging geometry and control configuration etc was considered, and then the whole surface of the object was analyzed by bundle adjustment through forma. lion of strip and block with which cover the whole surface of the object. As a result, we were able to prove possibility of the whole surface analysis of an object and to extract characteristics of accuracies in accordance with the number and configuration of control points. Also as desirable accuracies were able to be acquired even by employing configuration of only a few control point stationed on a limited surface, it is expected that the difficulties of control surveying will be able to be reduced considerably.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1338-1341
• /
• 1997

In this paper, we propose angular rate computation algorithm using GPS carrier phase. A direct angylar rate masurement has not previously been available form GRS, although its availability is highly desirable for use in state feedback control. So we propose angular rate computationalgorithm which derive angular rate from the velocity of differentiated carrier phase og GPS. The proposed algorithm contains attitude determination using double-differentiated carrier phase and 2 baseline configuration whcih provide more practical applications than 3 baseline.

• Journal of Korean Society for Quality Management
• /
• v.13 no.2
• /
• pp.29-36
• /
• 1985

The problem of selecting the gamma population with the largest mean out of k gamma populations, each of which has the same shape parameter is considered. An elimination type two-stage procedure is proposed which guarantees the same probability requirement using the indifference-zone approach as does the single-stage procedure of Gibbons, Olkin and Sobel (1977). The two-stage procedure has the highly desirable property that the expected total number of observations required by the procedure is always less than that of the corresponding single-stage procedure regardless of the configuration of the population parameters.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.459-464
• /
• 2001

A great level of strength and deformability on compressive zone of RC wall is essentially required when subjected to high axial and in-plane lateral loading due to earthquakes. One of the best ways to handle this situation is to provide the confinement effectiveness to the compressive zone by reinforcing steel. For this a series of design charts were constructed to evaluate the confinement effectiveness for a given steel configuration in accordance with a well-known model and part of them are presented in this paper. Using the chart, designers can choose a desirable steel arrangement in flexural compressive zone of RC walls for a prescribed confinement factor.

• The Microorganisms and Industry
• /
• v.19 no.4
• /
• pp.14-26
• /
• 1993

Optimizing protein production in recombinant E. coli strains involves manipulation of genetic and environmental factors. In designing a production system, attention must be paid to gene expression efficiency, culture conditions and bioreactor configuration. Although not much emphasis was given to the physiology of host strains in this review, an understanding of the relationship between the physiology of host cell growth and the overproduction of a cloned gene protein is of primary importance to the improvement of the recombinant fermentation processes. Sometimes it is desirable to make use of gene fusion systems, e.g. protein A, polypeptide, gutathione-S-transferase, or pneumococcal murein hydrolase fusion, to facilitate protein purification.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1416-1428
• /
• 2021

Pebble flow characteristics can be significantly affected by the configuration of pebble bed, especially for HTGR pebble beds. How to achieve a desired uniform flow pattern without stagnation is the top priority for reactor design. Pebbles flows inside some specially designed pebble bed with arc-shaped contraction configurations at the bottom, including both concave-inward and convex-outward shapes are explored based on discrete element method. Flow characteristics including pebble retention, residence-time frequency density, flow uniformity as well as axial velocity are investigated. The results show that the traditionally designed pebble bed with cone-shape bottom is not the most preferred structure with respect to flow pattern for reactor design. By improving the contraction configuration, the flow performance can be significantly enhanced. The flow in the convex-shape configuration featured by uniformity, consistency and less stagnation, is much more desirable for pebble bed design. In contrast, when the shape is from convex-forward to concave-inward, the flow shows more nonuniformity and stagnation in the corner although the average cross-section axial velocity is the largest due to the dominant middle pebbles.

• Journal of Intelligence and Information Systems
• /
• v.8 no.1
• /
• pp.119-139
• /
• 2002

In electronic catalogs, each item is represented as an independent unit while the parts of the item can be composed of a higher level of functionality. Thus, the search for this kind of product database is limited to the retrieval of most similar standard commodities. However, many industrial products need to configure optional parts to fulfill the required specifications. Since there are many paths in finding the required specifications, we need to develop a search system via the configuration process. In this system, we adopt a two-phased approach. The first phase finds the most similar template, and the second phase adjusts the template specifications toward the required set of specifications by the Constraint and Rule Satisfaction Problem approach. There is no guarantee that the most similar template can find the most desirable configuration. The search system needs backtracking capability, so the search can stop at a satisfied local optimal satisfaction. This framework is applied to the configuration of computers and peripherals. Template-based reasoning is basically the same as case-based reasoning. The required set of specifications is represented by a list of criteria, and matched with the product specifications to find the closest ones. To measure the distance, we develop a thesaurus of values, which can identify the meaning of numbers, symbols, and words. With this configuration, the performance of the search by configuration algorithm is evaluated in terms of feasibility and admissibility.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.17-26
• /
• 2015

A cluster tool used in many kinds of semiconductor processes for improving the performance and the quality of wafers has a simple configuration, but its schedule is not easy because of its parallel processing module, a lack of intermediate buffers, and time constraints. While there have been many studies on its schedule, most of them have focused on full cycles in which identical work cycles are repeated under constant task times. In this research, we suggest strategies of start-up transient scheduling which satisfies time constraints and converges into a desirable steady schedule for full work cycle. The proposed schedules are expected robust under the stationary stochastic task times. Finally, we show that the strategies make schedules enters the desirable steady schedule and robust using the simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1303-1308
• /
• 2008

Keeping cooling water temperature higher within the allowable range helps marine engines to run in more efficient condition especially when the engine load is low. Temperature control of jacket cooling water in outlet side of main engine has been more widely adopted to ships these days for the purpose to reduce fuel consumption rate. But If the temperature sensor for the control loop is placed at the outlet of engine, it brings more difficulties in attaining stable and desirable properties due to dead times included in pipe length and engine itself comparing to the case where the measuring point is at the inlet side of main engine. In relation with this problem, Feed-forward control could be one of realistic solutions as it reveals good properties and requires less cost for system configuration. This study suggests a forward control system which leads to improved temperature control performances to disturbance signals which could arise from variation of engine load or weather condition. Two dead times in the modelling were described, considering pipe length between the actuator and the engine as well as the thermal process inside the engine. The results of analysis were shown by simulations to confirm responses under different conditions.