• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.76-84
• /
• 1992

The DSP silicon compiler consists of language compiler, module generator, placement tool, router, layout generation tools, and simulator. In this paper, The language compiler, the module generator, placement tool, and simulator were developed and provided for the system designer. The language compiler translates the designer's system description language into the intermediate form file. The intermediate form file expresses the interconnections and specifications of the cells in the cell library. The simulator was developed and provided for the behavioral verification of the DSP system. For its implementation, the event-driven technique and the C$^{++}$ task library was used. The module generator was developed for the layout of the verified DSP system, and generates the functional block to be used in the DSP chip. And then the placement tool determines the appropriate positions of the cells in the DSP chip. In this paper, the placement tool was implemented by Min-Cut and Simulated Annealing algorithm. The placement process can be controlled by the several conditions input by the system designer.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.391-397
• /
• 1994

In this paper, we have developed a PLD Designer which is a design tool for digital circuits design using PLD device. PLD designer consists of a state graphic editor to extract boolean equations from state table within 20 states of FSM and a pin map editor to assign pin map for PLD device(PAL16R4, PAL22V10, GAL16V8, etc), which is suitable for extracted boolean equations. Also pin map editor generates a necessary JEDEC file to implement PLD device by using fuse map and checksum algorithm. To verify extracted boolean equation, we have developed simulation test vector generation algorithm. The results of JEDEC files generated by PLD designer is same with the results of JEDEC files generated by PALASM.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.135-144
• /
• 2002

Multimedia systems design generally requires a collaborative effort from a group of designers with a variety of backgrounds and tasks, such as content experts, instructional designers, media specialists, users, and so forth. The fact that the designers have totally different backgrounds and tasks may hinder their collaboration. This research develops a collaborative design tool for multimedia systems design, called the Designer's Cafe, with which multimedia designers can share their design knowledge on the Web freely. Designer's Cafe consists of three intelligent agents that are designed for supporting collaboration activities of multimedia designers. The intelligent agents are implemented by using JAVA SCRIPT and COLD FUSION. By using the tool, designers create, revise, and share their knowledge/ideas in very structured ways. The structured design process might enhance the collaboration activities of designers while designing a multimedia system within a virtual working space.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.199-202
• /
• 2000

In this paper, we developed an expert system that helped a machine-tool designer to select a moderate servomotor of the feed drive unit of a machine tool. With the specification of the drive unit, it searches for the set of servo-motors that have enough torque and power to satisfy the driving condition which the designer defines from the database. me database also contains knowledge and rules, which describe the design process and calculate design parameters of a feed drive. The knowledge-based design support module shows every steps of inference and reason for the solution that it provides.

• IE interfaces
• /
• v.5 no.2
• /
• pp.53-74
• /
• 1992

In order to design an FMS(Flexible Manufacturing System), an effective design tool is necessary for selecting and anlayzing the complex interacting factors of a manufacturing system. Considering most of the previous researches have been focused on evaluating the designed FMS, development of an integrated FMS designing system is needed for performing the design task such as machine selection and layout determination as well as the evaluation task of the designed FMS. In this paper, we developed a prototype of such a system called the intelligent FMS designer based on the techniques of Expert System and Simulation. By using this designing system, possible design alternatives can be analyzed and appropriate manufacturing capacity can be estimated at the designing stage. Various operating characteristics of the designed FMS can be also predicted before it is implemented. Eventually a suitable design alternative can be provided with cost details within relatively short time period. To demonstrate the performance and effectiveness of the designer, a simple example is tested. The results show a great potential for automating design processes of an FMS.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.27-34
• /
• 2006

Designers should know CAD tool/license information such as available number of licenses or tools, types, and configuration methods to use CAD tools properly in their group. Usually, this information is provided by managers who administrate CAD tool and license servers in the specific design group. In the previous CAD tool/licenses sharing methods, designers have to get CAD tool/license information manually and setup the environments with their own hands. n a new designer comes into the design working group, the designer wastes unnecessary design time, because of these processes. As a result, designer's poductivity and utilization of CAD tools will decrease Besides, managers also waste their time and effort, since they should provide CAD tool/license information manually to each designer. In this paper, we present an automated scheme to share CAD tool/license information based on directory service. The proposed methods automate the communication processes between managers and designers that minimze unnecessary time to share CAD information. In addition, as this system maintains the consistency of CAD information automatically that remove the repeated work of managers and designers, it improves the enciency of sharing. Besides, it automates the license configuration steps using prof(y Last, we offer Executable Proxy which is proper for thin CAD application. We believe this scheme will reduce designers and managers' time and effort as well as maximize the utilization of CAD tools.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2006

Since most CAD tool companies are carrying out very expensive license policies, designers are sharing CAD tools with a limited number of licenses within a design working or research group. It is important to share and use them efficiently, because CAD tool licenses are very valuable resources. Designers should know CAD tool license information such as available number of licenses, types, and configuration methods to use CAD tools properly in their group. Usually, this information is provided by managers who administrate CAD tool license servers in the specific design group. In the previous CAD tool licenses sharing methods, designers have to get CAD tool license information manually and setup the environments with their own hands, If a new designer comes into the design working group, the designer wastes unnecessary time and effort due to these manual processes. As a result, designer's productivity and utilization of CAD tools will decrease. Besides, managers also waste their time and effort, since they should provide CAD tool license information manually to each desiEner. In this paper, we present a more efficient scheme to share CAD tool licenses based on directory service. The proposed method automates not only the communication processes between managers and designers, but also the license configuration steps. We expect this scheme will reduce time and effort of designers and managers as well as enhance the utilization of CAD tools.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.165-169
• /
• 2006

This study presents a new stress analysis method to be substituted for the elastic analysis in such a plastic design procedure. This method is accompanied by an efficient mathematical tool which can be easily handled by personal computer. The method also easily accepts arbitrary strategies by the designer for selection member size.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.1
• /
• pp.55-63
• /
• 2003

ADE i,1 a software tool for the design and implementation of multi-agent systems. ADE allows a designer to draw a multi-agent system graphically, specify the necessary properties, and deploy their applications. ADE offers a set of intuitive, easy to use interfaces that enable a designer to completely specify the agents and agent interactions in a multi-agent system. In this environment, JATLite/sup ［1］/ is improved significantly. Furthermore, ADE provides a unique set of features for a multi-agent system design tool. An agent description method based on Design roadmap/sup ［2］/ theory, a hierarchy of agents, and a fully featured Java-based Graphical User Interface are combined in ADE. This distinct combination of features mates ADE stand out among the existing multi-agent system design tools. This paper presents the research related to the application of the ADE, along with descriptions of its design and implementation.