• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.60-66
• /
• 2011

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.651-658
• /
• 2017

This paper proposes an analysis method of performance degradation of antenna due to radio frequency interference between an antenna and adjacent noise sources using active scattering parameters. The radio frequency interference can be analyzed by the measured or simulated scattering parameters and by excited noise sources in the circuit as well. In this paper, a planar inverted-F antenna and a noise source are designed and fabricated to analyze radio frequency interference between the planar inverted-F antenna and noise source. The proposed analysis method uses active scattering parameters, of which verification is experimentally verified, and in simulation as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• 한국지열·수열에너지학회논문집
• /
• 제12권2호
• /
• pp.1-6
• /
• 2016

A ground air heat exchanger (GAHX), also called earth air heat exchanger is a useful technology to be integrated with other renewable energy technologies. In this study, ground-air heat exchanger system for the air source heat pump is introduced. The purpose of this study is to design the volumetric flow rate and the length of GAHX system. A GAHX length model equation has been developed and used for calculation. GAHX thermal efficiency are recommended as 75% and 85% in order to optimize pipe length. $2,750m^3/h$, $2,420m^3/h$ of volumetric flow rate on 88.3m, 111.7m length are suggested for providing 7.5kW thermal capacity. And the number of path is recommended more than two to minimize pressure drop. For future study, advanced model equation study with ground thermal behavior and a more efficient GAHX design will be considered.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.994-1005
• /
• 2015

This paper presents a novel power control strategy for PWM current-source rectifiers (CSRs) in the stationary frame based on the instantaneous power theory. In the proposed control strategy, a virtual resistance based on the capacitor voltage feedback is used to realize the active damping. In addition, the proportional resonant (PR) controller under the two-phase stationary coordinate is designed to track the ac reference current and to avoid the strong coupling brought about by the coordinate transformation. The limitations on improving steady-state performance of the PR controller is investigated and mitigated using a cascaded lead-lag compensator. In the z-domain, a straightforward procedure is developed to analyze and design the control-loop with the help of MATLAB/SISO software tools. In addition, robustness against parameter variations is analyzed. Finally, simulation and experimental results verify the proposed control scheme and design method.

• 한국정보처리학회논문지
• /
• 제5권8호
• /
• pp.2041-2049
• /
• 1998

소프트웨어의 품질을 향상시키며, 기존코드의 결함식별을 용이하게 하는 방법으로 프로그램의 후상태 종속성 분석을 통한 프로그램 ？살 및 유지보수지원 기법을 제안한다. 결함을 식별하고 분석하기에 이해도가 중요시 되는 교정유지보수를 위해서, 기존 코드의 분석 및 세그먼트화를 후상태 종속성모형(PSDG)을 이용하여 정적분할과 동적분할 및 의미분할의 장점을 살린 코드분할로 수행한다. 분할의 원리는 기존코드의 상태 종속성을 추적하여 그래프로 모형화한 후, 조각화(Clustering)와 강조분할(Highlighting)을 통해서 프로그램을 분할한다. PSDG 모형화의 결과로 비효율적인 프로그램 결함코드(Deadcode)의 식별 및 제거가 가능하며, 관련 프로그램 문장들을 일반화할 수 있고, 상태전이도 모형과의 확장연계로 분석 및 설계의 문서로 이용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.189-194
• /
• 2024

This paper presents a radiation-hardened-by-design preamplifier that utilizes a self-compensation technique with a charge-sensitive amplifier (CSA) and replica for total ionizing dose (TID) effects. The CSA consists of an operational amplifier (OPAMP) with a 6-bit binary weighted current source (BWCS) and feedback network. The replica circuit is utilized to compensate for the TID effects of the CSA. Two comparators can detect the operating point of the replica OPAMP and generate appropriate signals to control the switches of the BWCS. The proposed preamplifier was fabricated using a general-purpose complementary metal-oxide-silicon field effect transistor 0.18 ㎛ process and verified through a test up to 230 kGy (SiO₂) at a rate of 10.46 kGy (SiO₂)/h. The code of the BWCS control circuit varied with the total radiation dose. During the verification test, the initial value of the digital code was 39, and a final value of 30 was observed. Furthermore, the preamplifier output exhibited a maximum variation error of 2.39%, while the maximum rise-time error was 1.96%. A minimum signal-to-noise ratio of 49.64 dB was measured.

• 한국지열·수열에너지학회논문집
• /
• 제16권1호
• /
• pp.17-25
• /
• 2020

Ground-coupled heat pump (GCHP) systems have become an efficient alternative to conventional cooling and heating methods due to their higher energy using efficiency. Although some experimental and simulation works related to performance analysis of GCHP systems for commercial buildings have been done, relatively little has been reported on the performance evaluation of GCHP systems for school buildings. The purpose of this simulation study is to evaluate the performance of a hypothetical GCHP system for a school building in Seoul. We collected various data of building specifications and construction materials for the building and then modeled to calculate hourly building loads with SketchuUp and TRNSYS V17. In addition, we used GLD (Ground Loop Design) V2016, a GCHP system design and simulation software, to design the GCHP system for the building and to simulate temperature of circulating water in ground heat exchanger. The variation of entering source temperature (EST) into the system was calculated with different prediction time and then each result was compared. For 20 years of prediction time, EST for baseline design (Case A) based on the hourly simulation results were outranged from the design criteria.

• 복식문화연구
• /
• 제10권2호
• /
• pp.103-115
• /
• 2002

The purpose of this study is to investigate the consumers′ cognition and buying behavior on sports brand character. Since the character industries are booming, this study focused on the source and the expression method of sports brand characters that are already known to consumers. Subjects of this study were university students who were interested in sports brand characters, living in Seoul and Kyenggi-do. The questionnaire were developed based on the previous studies. Data were analysed by Frequency analysis, ANOVA, Duncan Test, and Spearman′s Rho. The results were as follows: 1. The most preferred source of sports brands character was "illustrated human figure"(i.e. a famous athlete like Michael Jordan). And the most favorite expression method of character was the combination of letter and symbol as the character of ASICS and NIKE. 2. The important design factors of sports brand character were the symbolism and aesthetics. The consumer recognized NIKE as the most well-designed character design. 3. Consumers′ preference of sports brand was found to be NIKE, REEBOK, ADIDAS, and FILA, in order. The reasons for preference were the design, the brand image, and the quality. On the other hand, the most frequently purchased brand was NIKE, FILA, and ADIDAS in order. Most of the purchase took place in the brand outlet store, and the consumers usually came with their friends for purchase of sports brand. The display of store was the consumers′ major source of information. 4. The preference group of sports brand character recognized more importantly color, design, brand, and especially fashionability than the non-preference group. And the most important criteria for brand selection were design, price, and comfort orderly. 5. Female consumers recognized more importantly color, design, brand, and others′ recommendations than male consumers. The aged consumers recognized importantly durability, comfort, and quality.