In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.
The purpose of this study is to explore the direction of developing policies for parks and green spaces for inclusive urban planning and regeneration. By reviewing the status, budget, and laws pertaining to urban parks in Korea, as well as assessing the inclusivity of urban parks, this study revealed the problems and limitations in Korea as follows. First, the urban park system, which takes into account indicators such as park area per capita and green space ratio, is focused only on quantitative expansion. Second, the distribution of urban parks is unequal; hence, the higher the number of vulnerable residents, the lower the quality of urban parks and green spaces. Moreover, this study focused on the UK central government, along with the five local governments, including London, Edinburgh, Cardiff, Belfast, and Liverpool. Through an analysis of the contexts and contents establishing UK park and green space policies that can reduce socioeconomic inequalities while at the same time increase inclusiveness. This study discovered the following. The government's awareness of the necessity of tackling socioeconomic inequalities to make an inclusive society, the change in the urban regeneration policies from physical redevelopment to neighborhood renewal, and the survey and research on the correlation of parks and green spaces, inequality, health, and well-being provided the background for policy establishment. As a result, the creation of an inclusive society has been reflected in the stated goals of the UK's national plan and the strategies for park and green space supply and qualitative improvement. Deprived areas and vulnerable groups have been included in many local governments' park and green space policies. Also, tools for analyzing deficiencies in parks and methods for examining the qualitative evaluation of parks were developed. Besides, for the sustainability of each project, various funding programs have been set up, such as raising funds and fund-matching schemes. Different ways of supporting partnerships have been arranged, such as the establishment of collaborative bodies for government organizations, allowing for the participation of private organizations. The study results suggested five policy schemes, including conducting research on inequality and inclusiveness for parks and green spaces, developing strategies for improving the quality of park services, identifying tools for analyzing policy areas, developing park project models for urban regeneration, and building partnerships and establishing support systems.
Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.
This study aims to research the influences of the discrimination of internet media and one-person media environment, especially, the one-person media creators leading the mobile media that could be accessed and viewed anywhere, on the user attitude and continuous subscription intention. Especially, this study aimed to understand the current situation of one-person media market represented as YouTube, to explore the relationship and ecology between each subject and elements composing the media market, and also to understand the mediating effects of the characteristics of YouTube creators on the relation between contents involvement and user attitude, and the relation between user attitude and subscription intention, and the mediating effects of contents involvement on the relation between characteristics of creators and user attitude. As research methods, first, for the theoretical establishment, this study collected, conducted, and organized the published domestic/foreign theses/journal papers. For the objective validity and verification of the established research model, a survey was conducted targeting adult men and women currently watching YouTube, and then the empirical analysis was performed through the final effective samples. And the results of this study are as follows. First, the playfulness and reliability on the relation between characteristics of creators and contents involvement were not significant while the professionalism was significant. Second, the professionalism on the relation between characteristics of creators and user attitude was not significant while the playfulness and reliability were significant. Third, the relation between contents involvement and user attitude was significant. Fourth, the relation between user attitude and subscription intention was also significant. Also, in the results of verifying the mediating effects of contents involvement, the contents involvement completely mediated the relation between characteristics(playfulness, reliability, and professionalism) of creators and user attitude. And in the conclusion, this study presented the implications and suggestions for further researches in the future.
Maker education started on the basis of the maker movement in which makers gathered in makerspace share their activities and experiences, and the educational value pursued in maker education is based on the constructivist paradigm. The purpose of this study is to present maker education components to be used in school education, focus on the characteristics and educational values of maker education, and explore ways to use them. To this end, this study explored the theoretical grounds to re-conceptualize maker education, drew statements based on in-depth interview data of teachers conducting maker education classes, and reviewed its validity through experts. Based on these statements, by deriving the components for the use of maker education, the direction of maker education in school education was set, and an example framework that could be used in subject class and creative experiential learning was proposed. Research shows that in maker education, makers cooperate to carry out activities, share ideas with others and try to improve them, and include self-direction such as learning, tinkering, design thinking, sharing and reflection. can see. In addition, maker education emphasizes experiential learning that can solve real problems that students face, rather than confining specific activities to student choices as needed. It emphasizes the learner's course of action rather than the outcome of the activity, tolerates the learner's failure, and emphasizes the role of the teacher as a facilitator to promote re-challenge. In the future, it can be used in various ways in each subject (curriculum expert, teaching/learning expert, elementary and middle school teachers, parents, local educators, etc.) and school activities, and it will contribute to setting future research directions as a basic research for school maker education.
Introduction As consumers' purchase behavior change into a rational and practical direction, the discount store industry came to have keen competition along with rapid external growth. Therefore as a solution, distribution businesses are concentrating on developing PB(Private Brand) which can realize differentiation and profitability at the same time. And as improvement in customer loyalty beyond customer satisfaction is effective in surviving in an environment with keen competition, PB is being used as a strategic tool to improve customer loyalty. To improve loyalty among PB users, it is necessary to develop PB by examining properties of a customer group, first of all, quality level perceived by consumers should be met to obtain customer satisfaction and customer trust and consequently induce customer loyalty. To provide results of systematic analysis on relations between antecedents influenced perceived quality and variables affecting customer loyalty, this study proposed a research model based on causal relations verified in prior researches and set 16 hypotheses about relations among 9 theoretical variables. Data was collected from 400 adult customers residing in Seoul and the Metropolitan area and using large scale discount stores, among them, 375 copies were analyzed using SPSS 15.0 and Amos 7.0. The findings of the present study followed as; We ascertained that the higher company reputation, brand reputation, product experience and brand familiarity, the higher perceived quality. The study also examined the higher perceived quality, the higher customer satisfaction, customer trust and customer loyalty. The findings showed that the higher customer satisfaction and customer trust, the higher customer loyalty. As for moderating effects between PB and NB in terms of influences of perceived quality factors on perceived quality, we can ascertain that PB was higher than NB in the influences of company reputation on perceived quality while NB was higher than PB in the influences of brand reputation and brand familiarity on perceived quality. These results of empirical analysis will be useful for those concerned to do marketing activities based on a clearer understanding of antecedents and consecutive factors influenced perceived quality. At last, discussions about academical and managerial implications in these results, we suggested the limitations of this study and the future research directions. Research Model and Hypotheses Test After analyzing if antecedent variables having influence on perceived quality shows any difference between PB and NB in terms of their influences on them, the relation between variables that have influence on customer loyalty was determined as Figure 1. We established 16 hypotheses to test and hypotheses are as follows; H1-1: Perceived price has a positive effect on perceived quality. H1-2: It is expected that PB and NB would have different influence in terms of perceived price on perceived quality. H2-1: Company reputation has a positive effect on perceived quality. H2-2: It is expected that PB and NB would have different influence in terms of company reputation on perceived quality. H3-1: Brand reputation has a positive effect on perceived quality. H3-2: It is expected that PB and NB would have different influence in terms of brand reputation on perceived quality. H4-1: Product experience has a positive effect on perceived quality. H4-2: It is expected that PB and NB would have different influence in terms of product experience on perceived quality. H5-1: Brand familiarity has a positive effect on perceived quality. H5-2: It is expected that PB and NB would have different influence in terms of brand familiarity on perceived quality. H6: Perceived quality has a positive effect on customer satisfaction. H7: Perceived quality has a positive effect on customer trust. H8: Perceived quality has a positive effect on customer loyalty. H9: Customer satisfaction has a positive effect on customer trust. H10: Customer satisfaction has a positive effect on customer loyalty. H11: Customer trust has a positive effect on customer loyalty. Results from analyzing main effects of research model is shown as