• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1314-1319
• /
• 2009

The design methods of mechanical systems are largely classified into deterministic methods and stochastic methods. In deterministic methods, design parameters are assumed to have fixed values. On the other hand, in stochastic methods, design parameters are assumed to be statistically distributed. When a stochastic method is employed, statistical characteristics of the populations of design variables are assumed to be known. However, very often, it is almost impossible or very expensive to obtain the statistical characteristics of the populations. Therefore a sample survey method is usually employed for stochastic methods. This paper describes the procedure of estimating the statistical characteristics of populations by employing sample data sets. An example of AFM micro cantilever beam is employed to show the effectiveness of the procedure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.949-959
• /
• 2006

Despite of the popularity of using empirical methods for support design, empirical rules suffer from the inherent problem of providing no indication of the safety degree of the design. For the support design of large span tunnel, it was considered that the empirical design guidelines should be augmented by more explicit design methods. This paper presents an overview of the analytical support design methodology that is used to refine initial empirical recommendations. The initial support design supplemented by analytical methods is validated by probabilistic and deterministic approach applied to stress-induced and structurally controlled gravity-driven instability problem each. As a result, the extent of the potential failure zone is sorted out and numerical parametric studies were performed to gain insight into the overall behavior of tunnel in the potential failure zone. Concequently, it was decided that additional conservation techniques have to be planed as a reserved support pattern.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2002년도 봄 학술발표회 논문집
• /
• pp.68-69
• /
• 2002

• 대한산업공학회지
• /
• 제38권3호
• /
• pp.198-207
• /
• 2012

In product or process parameter design, the case of multiple performance characteristics appears more commonly than that of a single characteristic. Numerous methods have been developed to deal with such multi-characteristic parameter design (MCPD) problems. Among these, this paper considers three representative methods, which are respectively based on the desirability function (DF), grey relational analysis (GRA), and principal component analysis (PCA). These three methods are then used to solve the MCPD problems in ten case studies reported in the literature. The performance of each method is evaluated for various combinations of its algorithmic parameters and alternatives. Relative performances of the three methods are then compared in terms of the significance of a design parameter and the overall performance value corresponding to the compromise optimal design condition identified by each method. Although no method is significantly inferior to others for the data sets considered, the GRA-based and PCA-based methods perform slightly better than the DF-based method. Besides, for the PCA-based method, the compromise optimal design condition depends much on which alternative is adopted while, for the GRA-based method, it is almost independent of the algorithmic parameter, and therefore, the difficulty involved in selecting an appropriate algorithmic parameter value can be alleviated.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권3호
• /
• pp.47-55
• /
• 2015

Purpose: While medical standard is rapidly improved, welfare of users and employees in hospitals is not treated correspondingly. Intercommunication of hospital users is thought to be very important for their welfare, and provision of conversation spaces within hospital environment needs to be expanded by architectural design. Space organization methods for the design of conversation space is to be embellished. Methods: Literature and hospital designs are analysed in order to develop the basis of argumentation for the hospital conversation space. 15 hospitals are reviewed and designed spaces for the intercommunication of the users are examined, Space organization efforts and design experiments are identified, and 6 organizational methods are proposed such as: 1) reducing territoriality 2) flowing space 3) categorizing and separating spaces 4) height variation 5) contact with outside and 6) Sun-lighted space. Results: 6 organization methods are confirmed in precedent hospital cases, and these proposed methods are applied in a new hospital design project to verify their usefulness. Implications: A hospital design project is presented based on these proposed methods of organization for the conversation space. Outcomes of this study can be applied for the formulation of human intercommunication spaces in other facilities.

• 한국가구학회지
• /
• 제19권4호
• /
• pp.252-259
• /
• 2008

High glossy painting and UV lithographic painting as painting methods for wooden furniture have played a positive role in enhancing the diversity of furniture design, which has been proved by the analysis on the relationship between the change in the diversity of design and painting methods of graduation projects (wooden furniture) presented by graduates of local universities, as a focus of this article. Since the development of new painting methods has the potential to develop aesthetic characteristics of wooden furniture, many design experiments are needed to improve decorative features of furniture, such as the application of high glossy painting and UV lithographic painting.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• 공학교육연구
• /
• 제23권1호
• /
• pp.59-64
• /
• 2020

The purpose of this study is to develop capstone design model of gender analysis methods suitable for engineering education field and examine improvements and effects by applying it to actual lessons for biomedical engineering students. Case study was performed to achieve the purpose of the study. Twelve gender analysis methods were applied to 'biomedical engineering capstone design' which was major course offered by department of biomedical engineering at J university. After the students understood how to analyze gender analysis methods and cases, they decided project topics and presented what gender analysis methods were applied for each project. Additionally, the results of analysis showed that the students were more able to understand the differences between men and women of all ages and try to narrow down the differences. They also found that they could contribute to development of new added value of knowledge and technology that reflected the needs of both men and women by applying gender analysis methods in system development.

• 디지털융복합연구
• /
• 제13권5호
• /
• pp.317-327
• /
• 2015

창의적 공간디자인 교육을 위해서는 온라인을 비롯한 새로운 커뮤니케이션의 융합이 필요하며, 이에 대한 실증적 연구의 필요성에서 본 연구는 시도되었다. 본 연구의 목적은 공간디자인 교육과 커뮤니케이션 방법에 대한 체계적 이해와 함께 실제 공간디자인 스튜디오 수업사례를 통해 온 오프라인 커뮤니케이션 방법의 융합에서 인지되는 친밀도와 유용성을 분석하는 것이다. 연구결과, 공간디자인의 단계별로 유용하게 적용되는 커뮤니케이션 방법이 각각 다르게 나타났고, 일방향적인 커뮤니케이션 방법보다 강의자뿐만 아니라 수강생 간의 양방향 커뮤니케이션이 가능한 방법이 더욱 유용하게 인식되는 것으로 나타났다. 또한, 이미지 등 시각적 자료와 함께 하는 온라인 커뮤니케이션 방법에 대한 친밀도와 유용성이 드러났다. 이러한 결과를 바탕으로 공간디자인 교육을 위한 새로운 커뮤니케이션 방법에 대한 올바른 방향에서의 융합이 요구된다.

• 한국실내디자인학회논문집
• /
• 제28호
• /
• pp.265-265
• /
• 2001

The perceptual presentation of interior design is to represent an interior space planned by a designer as if people see it in reality. The perceptual presentation methods that have developed are perspectives, full-scale models, small-scale models, photography of models, video taping of models, computer images, computer animation, and virtual reality. The purpose of this study is to investigate limits of those perceptual presentation methods according to their characteristics. The methods have characteristics that are either static or dynamic and either monoscopic or stereoscopic. In terms of representing interior spaces and perceiving interior spaces, the dynamic characteristic is more helpful than the static characteristic because the dynamic characteristic provides consecutively changing views of interior spaces when people walk around within the spaces. The stereoscopic characteristic is more helpful than the monoscopic characteristic because the stereoscopic characteristic provides the binocular depth perception. Full-scale models, small-scale models, virtual reality that have dynamic and stereoscopic characteristics, are most effective. The next effective methods are video taping of models and computer animation that have dynamic and monoscopic characteristics. The last effective methods are perspectives and photography of models that have static and monoscopic characteristics. But the most effective methods can not be said that those are perfect because each of them still has limits. Designers have to consider the limits of each perceptual presentation method to find a way that shows their designs most effectively. To develop the perceptual presentation methods of interior design, researchers should focus on the helpful characteristics that are dynamic and stereoscopic.