• 품질경영학회지
• /
• 제33권1호
• /
• pp.42-50
• /
• 2005

The IMD(International Institute for Management Development) report said that national competitiveness of Korea is declined in this year. The main reason for Korea's decline is a largely related to the weakness of corporate competitiveness. The new product development is a necessary ingredient for improving the national competitiveness. The analysis of changing of technologies and customer's needs is needed for successful new product development. In this paper, We found out successful factors of the project by use of DFSS(Design for Six Sigma) and proved them by case study of K-company. Result from this paper is applied to the new product development planning step for K-company and it made a great success rate. It is expected that the result is applied to the same kind industries.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.5-10
• /
• 2012

Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

• International Journal of Quality Innovation
• /
• 제8권3호
• /
• pp.23-34
• /
• 2007

Many practitioners strive to increase the efficiency of their product development. In addition, smaller companies must satisfy customers' expectations of their product development. These expectations can be e.g. use of specific methodologies such as Lean Product Development (LPD) and/or Design for Six Sigma (DFSS). This study attempts to identify differences and similarities between these methodologies and the connection between them. This comparison is of interest to practitioners that must choose a strategy for their product development as well as to researchers. The aim of both methodologies is to reduce waste and time of development and to raise the quality of a product at the very roots of the product: its development. LPD and DFSS help development managers to structure projects and focus as much as possible on customer expectations and satisfaction.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2000년도 춘계학술대회
• /
• pp.260-277
• /
• 2000

최근 미국의 모토롤라(주)에서 시작된 6 시그마(Six Sigma) 경영이 우리나라의 기업들에게 큰 관심의 대상이 되고 있다. 이 논문은 6 시그마 중에서 설계 및 개발분야에 사용되는 6$\sigma$ 설계(Design for Six Sigma: DFSS)에 관하여 고찰하여 보는 논문이다. 6 시그마에 관한 많은 이론이 나와 있으나 아직 DFSS에 관해서는 매우 미약한 편이다. 이 논문에서는 먼저 DFSS의 정의, DFSS 프로세스의 단계, DFSS의 로드맵 등을 먼저 다루고, 다음으로 DFSS에서 사용되는 각종의 과학적 관리기법들(품질기능전개, Scorecard, FMEA, TRIZ, 다구찌설계 등)에 대하여 간단히 기술하기로 한다. 마지막으로 DFSS의 실무적용방법을 제안한다.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.235-241
• /
• 2010

Engine Mount plays an important role which supports engine, isolates vibration from engine and blocks the vibration from road. Development of engine mount for NVH costs great a deal. So, the cost of development being reduced, the way developed effectively engine mount using DFSS technique is proposed in this paper. CTQ(critical to quality) is vibration and parameter is dynamic stiffness of mounts. The core parameters are selected with TPA(transfer path analysis) technique. It uses design of experiments(DOE) or Taguchi Methods to optimize parameter values and reduce variation. And then, this paper shows the result of improvement for vibration in the developing vehicle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1664-1667
• /
• 2005

The main function of Ball-Stop part is to operate power shift for vehicle with more than 5 ton when a driver changes gear using suitable force. This paper presents the implementation of a DFSS(Design For Six Sigma) for robust design of Ball-Stop part of power shift. The factors influencing Ball-Stop part performance is derived to find control factor. Based on this factor, contact force between head and detent pin analysis is performed to get optimal factor is analyzed and compared with contact force test result to verify reliability of design. This makes clear the reason why the proposed one is necessary and the role of DFSS.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.574-578
• /
• 2005

The project objectives, called critical-to-quality (CTQs) in six sigma, should be defined to faithfully reflect the customer requirements. The identification of such a set of CTQs, which is currently done using brainstorming in practice, is a challenging task. Notwithstanding the rapid growth of the six sigma literature, development of a systematic procedure for identifying CTQs has scarcely been addressed. This paper proposes a systematic method for generating CTQ candidates based on the given voice of the customer in the DFSS/C (Design for Six Sigma / Commercial) context. By providing a step-by-step procedure, the proposed method ensures that all the important CTQ candidates are identified and subjective judgments are minimally required. Hence, the shortcomings associated with the existing practice based on brainstorming can be effectively overcome. The unique characteristics of the proposed method are also demonstrated via a case study.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.8-14
• /
• 2006

The important function of Ball-Stop part is to operate power shift using suitable pneumatic force for vehicle with more than 5 ton when a driver changes gear. In this paper, we have applied the concept of the DFSS(Design for Six Sigma) to robust design of Ball-Stop part. First, we have found the control factors which could mainly influence the performance of the Ball-Stop part. The simulations of contact between head and detent pin was performed to evaluate effect of control factors according to DOE(Design of experiment) by using $ADAMS^{(R)}$. Finally, we have obtained optimal levels of each factors using $MINITAB^{(R)}$. Through the comparison of the result of optimized design with one of inintial design, we have verified the usefulness of DFSS method which can be applied to robust design of mechanical systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.499-507
• /
• 2018

Autonomous Underwater Vehicle (AUV), which are becoming more and more important in ocean exploitation tasks, needs energy conservation urgently when sailing the complex mission path in long time cruise. As hull lines optimization design becomes the key factor, which closely related with resistance, in AUV preliminary design stage, uncertainty parameters need to be considered seriously. In this research, Myring axial symmetry revolution body with parameterized expression is assumed as AUV hull lines, and its travelling resistance is obtained via modified DATCOM formula. The problems of AUV hull lines design for the minimum travelling resistance with uncertain parameters are studied. Based on reliability-based optimization design technology, Design For Six Sigma (DFSS) for high quality level is conducted, and is proved more reliability for the actual environment disturbance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.571-572
• /
• 2006

RTP (rapid thermal pressing), one of micro-pattern replication techniques like hot embossing, is focused on achieving shorter cycle time. DFSS(Design for Six Sigma) has been applied in order to enhance the completeness of the development process for RTP system. According to DIDOV roadmap, we derived design concepts and subsequently decided the main performances, design factors, and components for RTP system. In the design process of RTP system using finite element analysis, it was realized that its structural characteristics affect large area replicability. Optimizing structural design factors, based on CAE, it was checked out that its large area replicability could be improved in a virtual test. Finally, we have a plan to validate the large area replicability of the developed RTP system, by performing micro-pattern replication tests with polymeric sheets.