• Architectural research
• /
• v.16 no.4
• /
• pp.157-166
• /
• 2014

This research investigates the design process of free-form architecture to understand the design strategy and changing factors during the development phase and the cause for them. It is aimed to foresee the changing factors from the design process and to reduce design changes. It analyzes the design changes of free-form architecture based on projects with finalized documentation or under construction in South Korea. Many free-form shapes of the free-form architectures have to be adjusted to rigid-form in order to satisfy function and be economical to build. The research finds three patterns in design changes. First, from the factors for design changes: function, constructability, design, program add/subtract, efficiency, circulation; Function and Constructability are the higher factors compared with the rest. The two are the design changes suitable for actual usage and cost savings. Second, each project has different predominant factors for design changes as the degree of free-form is different. Contrary to initial expectation, the greater the degrees of free-form of the competition scheme, the higher the rate of Function among the factors for design changes. Constructability is higher when the degree of the free-form is less than others. It means that the lower the degree of the free-form, the more properly planned the space of the building is. Last, Constructability of free-form architecture is considered during the earlier design phase than definite-form, one by which the design changes by comparing 'Before fixed Space Program' (BSP) and 'After fixed Space Program' (ASP) design changes. The research would be helpful as a reference for setting up competition guidelines to reduce trial and error during the design process.

• Journal of the Korean housing association
• /
• v.14 no.1
• /
• pp.61-66
• /
• 2003

Considering the present outdoor environment of city landscapes, the improvement of well-formed street landscapes is a very important issue in Korea. At this point of time, it is very meaningful to understand the sign design and the planning condition of buildings and examine various problems about this and the possibilities for improvement. Thus the purpose of this study is to accumulate basic data to establish design guideline and visual factors for the sign design for useful environment. The conclusions of this study are as follows: to understand the factors of sign designs is through survey and analysis of building condition and city landscape. Planning factors for outdoor advertising design should be developed systematically and more fit to the street environment and designers in the aspect of control and guidance.

• Journal of the military operations research society of Korea
• /
• v.27 no.1
• /
• pp.101-113
• /
• 2001

Taguchi and VTA(variation Transmission Analysis) methods have been widely used recently as new methods for product design. In this study, Taguchi method using analysis of variance and VTA method using regression analysis are reviewed and compared with each other in terms of parameter design and tolerance design. In analysis of variance, variation of quality characteristics arises from noise factors, therefore the optimal levels of design factors are selected to minimize the effect of noise factors. n regression analysis, variation of quality characteristics arises from variation of each own design factors. As a method to reduce variation of these quality characteristics, sensitivity analysis was performed for each design factors. An example of calculating tolerance interval for the given defect rate in PPM is also introduced. Especially, the new method is suggested to increase the estimation accuracy of variation of quality characteristics through regression analysis.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.9-18
• /
• 2007

The success of a building design team is achieved as a result of a combination of multiple events/factors and interactions, and has a great impact on the quality of the building construction process. While most of previous studies have focused on quality of the construction process, the success of a design team has not been completely investigated. This paper presents the critical factors that impact the success of a building design team and describes an assessment tool to measure the successful performance of the design team with respect to the critical factors. The development of the assessment tool employs the concept of quality function deployment (QFD), a technique to measure the service quality of an organization.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.705-715
• /
• 2020

The domestic fashion industry of the middle and late 20th century emphasized the importance of a standardized design process; however, the values of differentiated brand individuality have become increasingly important with the qualitative·quantitative growth of designer brands. Therefore, paying attention to designer individuality (or a differentiated element of a designer brand growing up in the domestic fashion industry) this study reestablished factors of the designer brand individuality. An in-depth interview was conducted with 13 designers and consumers for empirical analysis. In order to identify concepts of designer individuality based on the theory of the brand personality by Aaker along with precedent studies, the study devised a theoretical frame to explain a conceptual structure of designer brand individuality as well as reestablish its factors as the designer individuality, design and non-design factors through empirical research. Empirical research derived the designer individuality factors as an external designer image, designer taste, design philosophy and designer personality. Design factors were derived as concept, working process and method, style and formativeness. Non-design factors were also extracted as wearing experience, wearer image, lookbook image, fashion shows and exhibitions. It is meaningful that little empirical research has been conducted on domestic fashion designers who actually run designer brands and that this study helped understand designer brands through a new approach called designer individuality.

• Agricultural and Biosystems Engineering
• /
• v.1 no.1
• /
• pp.7-15
• /
• 2000

Optimization was considered from three perspectives : minimum grain loss, minimum damaged grain loss, and minimum power consumption. Factors affecting combine performance were classified as control, adjustable, and environmental. Control and adjustable factors were optimized by the parameter design developed by Taguchi. Environmental factors were used as input for optimization. Optimum range for control and adjustable factors are presented. Parameter design was adequate to obtain the optimum levels of control factors and optimum range of adjustable factors.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.714-726
• /
• 1993

Optimization was considered from three perspectives ; minimum grain loss, minimum damaged grain loss, and minimum power consumption. Factors affecting combine performance were classified as control , adjustable , and environmental. Control and adjustable factors were optimized by the parameter design developed by Tajuchi. Environmental factors were used as input for optimization Optimum range for control and adjustable factors are presented. Parameter design was adequate to obtain the optimum levels of control factors and optimum range of adjustable factors.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.545-559
• /
• 2006

The function of product design has been an important part for success on new product development We deeply studied 'Chocolate-Phone' case which is considered as a representative of adopting design-oriented new product development strategy. According to this study, we found three contextual factors and nine key success factors for design-oriented new product development. The contextual factors consist of the strong needs for innovative product development, customer's needs for the emotional value, competitive situation for the new product launching. The key success factors consist of design, development marketing, overall sides. The key success factors of design side are to select talented designers and take an insight for market and communication skill. The key success factors of development side are to possess high technological abilities, to do divergence with removing or giving up some function management's strong support. The key success factors of marketing side are to bring core marketers from outside, capacity to gather ideas from outside. The key success factors of overall side are to share design-oriented principle with other parts and to change member's mind from engineer-oriented to market-oriented.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.17-34
• /
• 2009

There has been growing agreement that geotechnical reliability-based design (RBD) is necessary for establishing more advanced and integrated design system. In this study, resistance factors for LRFD pile design using CPT results were investigated for axially loaded driven piles. In order to address variability in design methodology, different CPT-based methods and load-settlement criteria, popular in practice, were selected and used for evaluation of resistance factors. A total of 32 data sets from 13 test sites were collected from the literature. In order to maintain the statistical consistency of the data sets, the characteristic pile load capacity was introduced in reliability analysis and evaluation of resistance factors. It was found that values of resistance factors considerably differ for different design methods, load-settlement criteria, and load capacity components. For the total resistance, resistance factors for LCPC method were higher than others, while those for Aoki-Velloso's and Philipponnat's methods were in similar ranges. In respect to load-settlement criteria, 0.1B and Chin's criteria produced higher resistance factors than DeBeer's and Davisson's criteria. Resistance factors for the base and shaft resistances were also presented and analyzed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.4
• /
• pp.57-68
• /
• 2011

The purpose of this study is to provide the planning factors of housing for the disabled and elderly based on the inclusive housing design as sustainable neighborhood. The goal of inclusive design is to make buildings and communities more livable for all type of people. Inclusive design should embrace other good design goals and reinforce them, not work against them. To carry out this purpose, we should proceed in the following way: First, we deducted the four design factors (the basic, recommendable, adaptable, and residential factors) by reviewing the characteristics of inclusive housing concepts. Second, we analyzed the related foreign design standards and guidelines such as the ICC/ANSI A117.1 Type C Units (the United States, 2009), Lifetime Standard (the United Kingdom, 2010), and Livable Housing Design Guideline (the Australian, 2010) through four design factors based on inclusive design concepts. Finally, we suggested the housing design factors for the disabled and the elderly in Korea. To conclude, we can make the followings: It is important basic factor that the bedroom and bathroom layout closed to each other. Also, the bedroom has the proper height of light switches, outlets, and windows. The recommendable factors take into consideration stairs and ramp, if existent. The adaptable factors are closely related to domestic housing culture as well as residential factors. Proceeding from this fact, the livability for people with disabilities and older requires accessibility and adaptability that take into account public and efficiency considering the current trend of housing development and urban planning.