• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.139-150
• /
• 2014

In this essay, we hoped to see how the operational university job database systems perform badly, since there are a lot of signs that they fall short of data design fundamentals. Fortunately, we are able to choose a university employment support database(UESD) application as a candidate for our study. We have taken UESD system as it is and we have developed an enhanced version of the UESD system, which strictly followed the basic fundamentals in data modeling and named it as NewUESD system. Then, we have conducted a comparison to see how much UESD system is deviated from the standard balancedness found in NewUESD. From the perspective of data obesity, we computed how much UESD contains unnecessary data. The NewUESD contained no unnecessary data at all, which implies that it has only data that is necessary to form a data model. But the data obesity of UESD system is found to be more than 50%. Therefore, it is significantly higher, 37% higher in this case, than the obesity judged to be normal, which is 19% in NewUESD system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.279-283
• /
• 2004

This experiment was carried out at paddy field (commercial silty loam soil) in the southwestern Korea. Pungsannamulkong, a determinate growth habit, was a relatively high yielding and late maturing cultivar, and Han­namkong, a semi determinate growth habit, was a relatively low yielding and early maturing cultivar. Seeds were sowed at two plants and with a planting density of $70{\times}10cm$ on May 26, 2003. Fertilizer was applied prior to planting at a rate of 3.0-3.0-3.4g $(N-P_2O_5-K_2O)\;per\;m^2$ by all basal fertilizations. Experimental design was a randomized complete block with three replications. Seed yield was higher in Pungsannamulkong by 362g per $m^2$ than in Hannamkong of 260g per $m^2$ Also, the number of pod, number of seed, and number of seed per pod were greater in Pungsannamulkong than in Hannamkong. The number of leaves per $m^2$ showed similar with two soybean cultivars up to August 24 but thereafter it decreased in Hannamkong. The leaf area up to August 4 increased in Hannamkong higher than in Pungsannamulkong, but after that time, Pungsannamulkong had greater leaf area than Hannamkong. The shoot and leaf dry matter of two soybean cultivars from June 23 to August 4 were similar but thereafter, Pungsannamulkong had a significantly greater than Hannamkong. Crop growth rate (CGR), relative growth rate (RGR) and net assimilate rate (NAR) for Punsannamulkong were relatively higher than Hannamkong but leaf area ratio (LAR) and specific leaf weight (SLW) showed higher in Hannamkong. Most of leaves distributed in the ranges of 80-90cm and 60-70cm from the soil surface in Punsannamulkong and Hannamkong, respectively. Pods of Punsannamulkong ranged 10-80cm from the soil surface and most of pods were distributed at 40-50cm. Photosynthetic rate at the flowering stage showed a significant difference between cultivars in the upper most leaf position. There was no significant difference of the photosynthetic rate at $7^{tn}$ leaf at the flowering stage, and the uppermost and 7th leaf position at the seed development stage between two soybean cultivars.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.338-338
• /
• 2017

One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.78-78
• /
• 2017

This study was carried out to introduce of agronomic characteristics, forage yields and quality of Sorghum ${\times}$ Sudangrass hybrids 'Cadan 99B' and 'Sweet Sioux WMR' from 2015 to 2016 in middle and southern regions of Korea. The field experiment design was randomized compete block in seven varieties with three repetitions. Sorghum ${\times}$ Sudangrass hybrids were sown in mid-May in middle region, and end-May in southern region of Korea, 2015 and 2016. And, the first harvests were from the end of July to the beginning of August, and the second harvests were from the end of September to the beginning of October in middle and southern regions of Korea. The observed average heading date of Sorghum ${\times}$ Sudangrass hybrids Cadan 99B and Sweet Sioux WMR were July 22. The heading date of Cadan 99B and Sweet Sioux WMR were 8 days earlier than heading control variety SX-17 and 5 days earlier than BMR control Revolution. The sugar contents of Candan 99B and Sweet Sioux WMR were 6.5 and $6.9Brix^{\circ}$, respectively. Comparison with brown mid-rid (BMR) variety, the sugar contents of Cadan 99B and Sweet Sioux WMR were 0.2 and $0.6Brix^{\circ}$ higher than Revolution, respectively. The average of dry matter (DM) yield for 2 years and 2 regions of Cadan 99B (24,587kg/ha) was the highest among the seven varieties, but there was no significant difference among other varieties except headless control variety Jumbo (19,119kg/ha) and test variety LATTE (20,778kg/ha) (p>0.05). The crude protein (CP) and in vitro dry matter digestibility (IVDMD) of Cadan 99B were 7.5% and 60.2%, and Sweet Sioux WMR were 6.9% and 60.7%, respectively. The results of this study indicated that Sorghum ${\times}$ Sudangrass hybrids Cadan 99B and Sweet Sioux WMR were recommended that earlier heading date than other varieties, suitable for silage because of high sugar contents, and high yields of DM in middle and southern regions of Korea.

• Journal of Hospice and Palliative Care
• /
• v.11 no.2
• /
• pp.91-98
• /
• 2008

Purpose: This study was undertaken to compare perceived stress and coping patterns, and their effects on depression between cancer patients and healthy adults. Methods: A descriptive design was used with 278 subjects, consisting of 139 cancer patients and 139 health adults, living in an urban area. All participants completed the following prerequisites; Stress Visual Analog Scale, Ways of Coping Checklist (W.C.C.L), Depression Index (CES-D), and Demography and Disease Data Questionnaire. Results: Perceived stress and depression were significantly higher, while wishful thinking was lower among cancer patients than healthy adults, after adjusting for education and family income which were not homogeneous between the groups. Among cancer patients, 20.2% of depression was mainly due to seeking support (10.7%), perceived stress and education, while 30.7% of depression in healthy adults was due to perceived stress, problem solving, and seeking support. Conclusion: These findings suggest that interventions to manage depression in cancer patients should include strategies to best foster positive coping patterns and reduce perceived stress.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2013

This study was carried out for the establishment of theory and foundational data for breeding, on variegated foliage plants using for potted plants, based on examination and analysis for shape, color, and area ratio of variegated leaves and chlorophyll contents. Six families, 18 genus, and 54 species of variegated plants domestically distributed in Korea were used as the plant materials. Patterns based on chlorophyll-deficient part in variegated leaves were divided into 20 types, such as steps, border, collapsed border, sandy border, half, silk, stars, vein, firewood, border and firewood, center, entirety, leaf, irregular, net, watermelon, melon, and so on. There were 10 kinds of colors including dark green, red, dark red, reddish white, reddish yellow, white, silver, silvery white, yellowish white, and yellow. The ratio of variegated area was ranged from 5.8% to 100% and it was diverse depending on species or cultivar. The ratios by patterns were highest in entirety (98.6%) and relatively high in step (60.8%), whereas, low in boarder, star and firewood (33.6-36.4%), and relatively low in half and vein (43%). Chlorophyll content of variegated leaf was rather lower compared to normal plants and chlorophyll b tended to be higher in ratio of chlorophyll a to b. Particularly content of chlorophyll b in Stromanthe sanguinea 'Triostar', Dracaena fragrans 'Massangeana Compacta', D. reflexa 'Song of India', and Tradescantia spathacea was higher than chlorophyll a in comparison with that of normal plants.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4912-4933
• /
• 2015

Information Centric Networking (ICN) has recently attracted great attention. It names the content decoupling from the location and introduces network caching, making the content to be cached anywhere within the network. The benefits of such design are obvious, however, many challenges still need to be solved. Among them, the local caching policy is widely discussed and it can be further divided into two parts, namely the cache permission policy and the cache replacement policy. The former is used to decide whether an incoming content should be cached while the latter is used to evict a cached content if required. The Internet is a user-oriented network and popular contents always have much more requests than unpopular ones. Caching such popular contents closer to the user's location can improve the network performance, and consequently, the local caching policy is required to identify popular contents. However, considering the line speed requirement of ICN routers, the local caching policy whose complexity is larger than O(1) cannot be applied. In terms of the replacement policy, Least Recently Used (LRU) is selected as the default one for ICN because of its low complexity, although its ability to identify the popular content is poor. Hence, the identification of popular contents should be completed by the cache permission policy. In this paper, a cache permission policy called Cache-Filter, whose complexity is O(1), is proposed, aiming to store popular contents closer to users. Cache-Filter takes the content popularity into account and achieves the goal through the collaboration of on-path nodes. Extensive simulations are conducted to evaluate the performance of Cache-Filter. Leave Copy Down (LCD), Move Copy Down (MCD), Betw, ProbCache, ProbCache⁺, Prob(p) and Probabilistic Caching with Secondary List (PCSL) are also implemented for comparison. The results show that Cache-Filter performs well. For example, in terms of the distance to access to contents, compared with Leave Copy Everywhere (LCE) used by Named Data Networking (NDN) as the permission policy, Cache-Filter saves over 17% number of hops.

• School Mathematics
• /
• v.12 no.3
• /
• pp.273-299
• /
• 2010

The purpose of the study is designing and implementing 'Sampling Distributions Simulation' to help students to understand concepts of sampling distributions. This computer simulation is developed to help students understand sampling distributions more easily. 'Sampling Distributions Simulation' consists of 4 sessions. 'The first session - Confidence level and confidence intervals - includes checking if the intended confidence level is actually achieved by the real relative frequency for the obtained sample confidence intervals containing population mean. This will give the students clearer idea about confidence level and confidence intervals in addition to the role of sampling distribution of the sample means among those. 'The second session - Sampling Distributions - helps understand sampling distribution of the sample means, through the simulation method to make comparison between the histogram of sampling distributions and that of the population. The third session - The Central Limit Theorem - includes calculating the means of the samples taken from a population which follows a uniform distribution or follows a Bernoulli distribution and then making the histograms of those means. This will provides comprehension of the central limit theorem, which mentions about the sampling distribution of the sample means when the sample size is very large. The forth session - the normal approximation to the binomial distribution - helps understand the normal approximation to the binomial distribution as an alternative version of central limit theorem. With the practical usage of the shareware 'Sampling Distributions Simulation', we expect students to have a new vision on the sampling distribution and to get more emphasis on it. With the sound understandings on the sampling distributions, more accurate and profound statistical inferences are expected. And the role of the sampling distribution in the inferences should be more deeply appreciated.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.417-423
• /
• 2007

Oxy-gasification or oxygen-blown gasification, enables a clean and efficient use of coal and opens a promising way to CO2 capture. The coal gasification process of a slurry feed type, entrained-flow coal gasifier was numerically predicted in this paper. The purposes of this study are to develop an evaluation technique for design and performance optimization of coal gasifiers using a numerical simulation technique, and to confirm the validity of the model. By dividing the complicated coal gasification process into several simplified stages such as slurry evaporation, coal devolatilization, mixture fraction model and two-phase reactions coupled with turbulent flow and two-phase heat transfer, a comprehensive numerical model was constructed to simulate the coal gasification process. The influence of turbulence on the gas properties was taken into account by the PDF (Probability Density Function) model. A numerical simulation with the coal gasification model is performed on the Conoco-Philips type gasifier for IGCC plant. Gas temperature distribution and product gas composition are also presented. Numerical computations were performed to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow field. The concentration of major products, CO and H2 were calculated with varying oxygen to coal ratio (0.2-1.5) and steam to coal ratio(0.3-0.7). To verify the validity of predictions, predicted values of CO and H2 concentrations at the exit of the gasifier were compared with previous work of the same geometry and operating points. Predictions showed that the CO and H2 concentration increased gradually to its maximum value with increasing oxygen-coal and hydrogen-coal ratio and decreased. When the oxygen-coal ratio was between 0.8 and 1.2, and the steam-coal ratio was between 0.4 and 0.5, high values of CO and H2 were obtained. This study also deals with the comparison of CFD (Computational Flow Dynamics) and STATNJAN results which consider the objective gasifier as chemical equilibrium to know the effect of flow on objective gasifier compared to equilibrium. This study makes objective gasifier divided into a few ranges to study the evolution of the gasification locally. By this method, we can find that there are characteristics in the each scope divided.