• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.45-54
• /
• 2008

A new proposed repository has a final capacity of 800,000 drums radioactive waste. Most of foreign repositories have a general practice of segregating control zones which mainly contributes to classification of degree of control, whether it is called buffer zone or not. Domestic regulatory requirements of establishment of buffer zone in a repository are not much different from those of nuclear power plants for operation period, in which satisfactory design objective or performance objective is the most important factor in determination of the buffer zone. The meaning of buffer zone after closure is a minimum requested area which can prevent inadvertant intruders from leading to non-allowable exposure during institutional control period. Safety assessment with drinking well scenario giving rise to the highest probability of exposure among the intruder's actions can verify fulfillment of the buffer zone which is determined by operational safety of the repository. At present. for the repository to be constructed in a few years, the same procedure and concept as described in this paper are applied that can satisfy regulatory requirements and radiological safety as well. However, the capacity of the repository will be stepwise extended upto 800,000 drums, consequently its layout will be varied too. Timely considerations will be necessary for current boundary of the buffer zone which has been established on the basis of 100,000 drums disposal.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.433-442
• /
• 2009

People are tending to buy products through the Internet rather than purchasing them from the store. Some of the consumers give their feedback on line such as reviews, replies, comments, and blogs after they purchased the products. People are also likely to get some information through the Internet. Therefore, companies and public institutes have been facing this situation where they need to collect and analyze reviews or public opinions for them because many consumers are interested in other's opinions when they are about to make a purchase. However, most of the people's reviews on web site are too numerous, short and redundant. Under these circumstances, the emotion scanning system of text documents on the web is rising to the surface. Extracting writer's opinions or subjective ideas from text exists labeled words like GI(General Inquirer) and LKB(Lexical Knowledge base of near synonym difference) in English, however Korean language is not provided yet. In this paper, we labeled positive, negative, and neutral attribute at 4 POS(part of speech) which are noun, adjective, verb, and adverb in Korean dictionary. We extract construction patterns of emotional words and relationships among words in sentences from a large training set, and learned them. Based on this knowledge, comments and reviews regarding products are classified into two classes polarities with positive and negative using SO-PMI, which found the optimal condition from a combination of 4 POS. Lastly, in the design of the system, a flexible user interface is designed to add or edit the emotional words, the construction patterns related to emotions, and relationships among the words.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.97-106
• /
• 2016

Purpose - Social commerce is a certain way of how people buy some products together with others through the internet sites with mutual interactions among customers with the benefits of SNS when buying some products. At present, China market has some problems due to its rapid growing. However, empirical research or academic approach to social commerce has not been made enough. So, it is important for Chinese social market to develop and enlarge the customers with stability under the reliability and satisfaction. Also it is important for them to have repurchase intention. Nowadays, it is necessary to find the factors on customer satisfaction and trust, whereas consumers' dissatisfaction and unreliability are increasing on social commerce recently. In addition, researches on social commerce have been actively pursued by a variety of domestic and foreign scholars. However, researches on social commerce and Chinese market are short of, and they have some limitations because of the rapid growth of the market even though it is the early stage. The current situation requires researches on consumers' repurchase intention for continuing growth in the future according to the growth of Chinese social commerce. Research design, data, and methodology - The literature and the empirical studies are combined in order to achieve the purpose of the study. Deriving social commerce features and consumer properties as factors affecting the repurchase intention through the literature, and these factors have modeled a series of assumptions about the impact on satisfaction and trust, and have established hypotheses to verify them. The survey which is conducted to test the hypothesis and questionnaires are derived based on the variables discussed in the previous study. Appropriate measures were developed and tested on 227 respondents in China with a cross-sectional questionnaire survey. The path relationships of the research model were analyzed by SPSS 23.0 and Amos 23.0. Results - Research results about social commerce characteristics and factors affecting the repurchase intention are presented to Chinese market companies that adopt business models and consumer characteristics. In addition, this study focuses on the characteristics of social commerce, from two-dimensional characteristics of the consumer satisfaction, trust and the impact on the repurchase. Therefore, social commerce features and consumer properties based on the results of this study may lead the strategic implications that may increase the repurchase intention. Conclusions - The classification reviewing the previous findings related to social commerce and social commerce features affects social commerce repurchase (price discount, interactivity) and consumer characteristics (impulsivity, innovation, collectivism). It affects repurchase on factors and analyzes empirically. The empirical results identify major characteristics (social commerce characteristics, attributes) that affect the repurchase intention, and give the practical implications as well as the business strategies that are able to enhance social commerce repurchase consumers. Social commerce is a certain way of how people buy some products together with others through the internet sites with mutual interactions among customers with the benefits of SNS when buying some products.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.59-65
• /
• 2013

Purpose - Studies of mechanism as a competitive strategy, a relatively new field in the study of strategic management research, has recently drawn the attention of the business management scholars. The literature has so far proposed the subjective-based view, environment-based view, and the resource-based view in its analyses of firm management. Hence, it is highly likely for the firm management to be reasonably thought of as a combination of and interaction among the three key elements of subject, environment, and resources this is the mechanism-based view (MBV). It is reasonable to consider firm management to be the combination of and interaction among the three key elements of subject, environment, and resources. The overall dynamic process that integrates these three elements and creates functional harmony is identified as the mechanism, the principle of firm management. Much of the extant literatures on MBV has mainly focused on case studies, a qualitative approach prone to subjectivity of the researcher, although the intuition from the study may lead to meaningful insights into a firm-specific mechanism. This study's focus is also on case analysis, but it still attempts a quantitative approach in order to reach a scientific and systematic understanding of the MBV. Research design, data, and methodology - I used both a qualitative and quantitative approach to a single model, given the complexity of the innovation processes. I conducted in-depth interviews with POSCO employees-20 from general management, two from human resources, eight from information technology, five from finance and accounting, and five from production and logistics management. Once the innovative events were selected, the interview results were double-checked by the interviewees themselves to ensure the accuracy of the answers recorded. Based on the interview, I then conducted statistical validation using the survey results as well. Results - This study analyzes the building process of innovation and the effect of the mechanism pattern on innovation by examining the case of POSCO, which has survived over the past 21 years. I apply a new analytical tool to study mechanism innovation types, perform a new classification, and describe the interrelationships among the mechanism factors. This process allows me to see how the "Subject"factor interacts with the other factors. I found that, in the innovation process of the adoption stage, Subject had a mediating effect but that the mediating effect of resource and performance was smaller than the effect of Subject on performance alone. During the implementation stage, the mediating effect of Subject increased. Conclusion - Therefore, I have confirmed that the subject utilizes resources reasonably and efficiently. I have also advanced mechanism studies: whereas the field's research methods have been largely confined to single case studies, I have used both qualitative and quantitative methods to examine the relationships among mechanisms.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.277-283
• /
• 2014

Next Generation Small Satellite-1 (NEXTSat-1) is scheduled to launch in 2017 and Instruments for the Study of Space Storm (ISSS) is planned to be onboard the NEXTSat-1. High Energy Particle Detector (HEPD) is one of the equipment comprising ISSS and the main objective of HEPD is to measure the high energy particles streaming into the Earth radiation belt during the event of a space storm, especially, electrons and protons, to obtain the flux information of those particles. For the design of HEPD, the Geometrical Factor was calculated to be 0.05 to be consistent with the targets of measurement and the structure of telescope with field of view of $33.4^{\circ}$ was designed using this factor. In order to decide the thickness of the detector sensor and the classification of the detection channels, a simulation was performed using GEANT4. Based on the simulation results, two silicon detectors with 1 mm thickness were selected and the aluminum foil of 0.05 mm is placed right in front of the silicon detectors to shield low energy particles. The detection channels are divided into an electron channel and two proton channels based on the measured LET of the particle. If the measured LET is less than 0.8 MeV, the particle belongs to the electron channel, otherwise it belongs to proton channels. HEPD is installed in the direction of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ against the along-track of a satellite to enable the efficient measurement of high energy particles. HEPD detects electrons with the energy of 0.1 MeV to several MeV and protons with the energy of more than a few MeV. Thus, the study on the dynamic mechanism of these particles in the Earth radiation belt will be performed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.211-224
• /
• 2018

It is important to design tunnel support system considering the various loads acting on the tunnel because they have a direct impact on the stability of tunnels. In Korea, standardized support patterns are defined based on the rock mass classification system depending on the project, and it is stated that it should be modified appropriately considering the behavior of tunnel during construction. In this study, the tunnel support pattern optimization method is suggested based on the convergence-confinement method, earth pressure, axial force of rock bolt, and moment acting on the shotcrete. The length and spacing of the rock bolts and the thickness of the shotcrete were optimized by using the differential evolution algorithm (DEA) and the results were compared to the standard support pattern III for railway tunnel. Rock bolt length can be reduced and the installation interval can be widened for shallow tunnel. As the depth of tunnel increases, the thickness of shotcrete increases linearly. Therefore, the thickness of shotcrete should be thicker than the standard support pattern as the depth of tunnel increases to secure the stability of tunnel.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.139-150
• /
• 2007

As computer technology has been rapidly advanced, geographic information system (GIS) is recently used in many disciplines. In this study, for a model area in Seoul, seismic hazard potential relating to site effects, which are influenced by the subsurface geotechnical conditions, was estimated using the GIS tool. The distribution of pre-existing borehole drilling data in Seoul metropolitan area was examined for the regional estimation of site-specific seismic responses at the model area. Spatial geo-layers across the entire model area were predicted by constructing a GIS-based geotechnical information system (GTIS). A microzonation of site period $(T_G)$ for estimating site-specific seismic responses at the model area was performed within the GTIS. The spatial microzoning map of $T_G$ indicated seismic vulnerability of two- to four-storied buildings in the model area. Furthermore, a site classification map for determining the design ground motion was established based on the $T_G$ within the GTIS. This informed that most of location in the model area was categorized into current site classes C and D. This seismic microzonation framework for the model area could be applicable particularly in the entire Seoul metropolitan area based on the pre-existing borehole data.

• Korean Journal of Cognitive Science
• /
• v.12 no.3
• /
• pp.1-18
• /
• 2001

The goal of this paper is the pedagogical application of a Korean Spell/Grammar Checker to the web-based language learning system for Korean writing. To maximize the efficient instruction of our learning system \\`Urimal Baeumteo\\` we have to improve our Korean Spell/Grammar Checker. Today the NLP system\\`s performance defends on its semantic processing capability. In our Korean Spell/Grammar Checker. the tasks accomplished in the semantic level are: the detection and correction of misused derived and compound nouns in a Korean spell-checking device and the detection and correction of syntactic and semantic errors in a Korean grammars-checking device. We describe a common approach to the partial parsing using collocation rules based on the dependency grammar. To provide more detailed semantic rules. we classified nouns according to their concepts. and subcategorized verbs referring to their syntactic and semantic features. Improving a Korean Spell/Gl-Grammar Checker makes our learning system active and intelligent in a web-based environment. We acknowledge the flaws in our system: the classification of nouns based on their meanings and concepts is a time consuming task. the analytic unit of this study is principally limited to the phrases in a sentence therefore the accurate parsing of embedded sentences remains a difficult problem to solve. Concerning the web-based language learning system. it is critically important to consider its interface design and structure of its contents.

• Journal of Distribution Science
• /
• v.12 no.11
• /
• pp.77-83
• /
• 2014

Purpose - The National Agricultural Cooperative Federation of Korea and National Fisheries Cooperative Federation of Korea have prosecuted both financial and retail businesses. As cooperatives are public institutions and receive government support, their sound management is required by the Financial Supervisory Service in Korea. This is mainly managed by CAEL, which is changed by CAMEL. However, NFFC's business section, managing the finance and retail businesses, is unified and evaluated; the CAEL model has an insufficient classification to evaluate the retail industry. First, there is discrimination power as regards CAEL. Although the retail business sector union can receive a higher rating on a CAEL model, defaults have often been reported. Therefore, a default prediction model is needed to support a CAEL model. As we have the default prediction model using a subdivision of indexes and statistical methods, it can be useful to have a prevention function through the estimation of the retail sector's default probability. Second, separating the difference between the finance and retail business sectors is necessary. Their businesses have different characteristics. Based on various management indexes that have been systematically managed by the National Fisheries Cooperative Federation of Korea, our model predicts retail default, and is better than the CAEL model in its failure prediction because it has various discriminative financial ratios reflecting the retail industry situation. Research design, data, and methodology - The model to predict retail default was presented using logistic analysis. To develop the predictive model, we use the retail financial statements of the NFCF. We consider 93 unions each year from 2006 to 2012 to select confident management indexes. We also adapted the statistical power analysis that is a t-test, logit analysis, AR (accuracy ratio), and AUROC (Area Under Receiver Operating Characteristic) analysis. Finally, through the multivariate logistic model, we show that it is excellent in its discrimination power and higher in its hit ratio for default prediction. We also evaluate its usefulness. Results - The statistical power analysis using the AR (AUROC) method on the short term model shows that the logistic model has excellent discrimination power, with 84.6%. Further, it is higher in its hit ratio for failure (prediction) of total model, at 94%, indicating that it is temporally stable and useful for evaluating the management status of retail institutions. Conclusions - This model is useful for evaluating the management status of retail union institutions. First, subdividing CAEL evaluation is required. The existing CAEL evaluation is underdeveloped, and discrimination power falls. Second, efforts to develop a varied and rational management index are continuously required. An index reflecting retail industry characteristics needs to be developed. However, extending this study will need the following. First, it will require a complementary default model reflecting size differences. Second, in the case of small and medium retail, it will need non-financial information. Therefore, it will be a hybrid default model reflecting financial and non-financial information.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.25-37
• /
• 2013

Purpose - The structure of retailing has changed as retailers develop markets in response to business environment changes. This study aims to analyze the general situation of retailers in order to predict future global strategy using case studies of overseas expansion strategy and the Metro Group's global strategy. Research design, data, and methodology - The backgrounds to the new retail business model and retailer classification are analyzed as theoretical data. In addition, the key success point of the Metro Group's "cash and carry" strategy is analyzed as is the Metro Group's global CFAR (collaborative planning, forecasting, and replenishment) strategy. Finally, the plan for cooperation and precise forecasting under the Metro Group's supply chain management are analyzed from the promotion environment viewpoint. Related materials analyzed included the 2012 annual report, the Metro Group's web page, and a video interview with the executive in charge of global strategy and the new market development department. Some data were revised to avoid disrupting essential aspects of the case studies. Results - The important finding was that the Metro Group could be a world-class retail company with its successful global expansion strategy. The Metro Group's global strategy's primary goal is to have a leading business position in Eastern and Western Europe. The "cash and carry" strategy is highest priority in its overseas expansion strategy. Moreover, the Metro Group has standardized product planning capacity, which could be applied in various countries with different structural and cultural backgrounds. This is the main reason that the Metro Group could rapidly become successful in the Eastern Europe and Asian markets through its structural overseas expansion strategies. In addition, the Metro Group emphasizes the importance of supply chain management. Conclusions - First, retailers should create additional value through utilizing the domestic market, market power, and economies of scale to launch a global strategy to maximize benefits from diversification. Second, the political, economic, and cultural background of the target country needs to be understood to successfully implement the overseas expansion strategy. Third, the main factor of successful cooperation with a local partner is how quickly the company gains total understanding of the business resources and core competence of its partner. All organizations should focus on the achievement of goals in order to successfully operate the partnership. Fourth, retailers should improve their business, financial and organizational structure. Moreover, the work processes and company culture should also be improved to respond strongly in the competitive global market. Fifth, the essential point of a successful retail business is the control capacity of its branding and format. The retailer could avoid forecasting errors through supply chain management by perfectly distributing the actual amount of its inventory. In addition, the risks along the supply chain are effectively shared between the supply chain partners. Finally, the central tendency of the market is to gain in strength with this taking place across all parts of the business.