• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1432-1436
• /
• 2006

Feasibility of optimizing Zwicker's loudness has been shown by using MSC/NASTRAN, SYSNOISE, and a semi-analytical design sensitivity by Wang and Kang. Design sensitivity analysis of Zwicker's loudness is developed by using ANSYS, COMET, and an adjoint variable method in order to reduce computation. A numerical example shows significant reduction of computation time for design sensitivity analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.239-246
• /
• 2003

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member, the design concept of strong column - weak beam, and etc. Through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy As the result economical and safe design can be achieved.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.93-110
• /
• 2011

This study investigates the analysis on the acceptance of Foreign Fashion trends in Korean Fashion Collection by collections, years, season, and designers. The purpose of this study is Korean collection's degree to adopt and receive foreign collections, by comparative analysis of design features between Seoul and foreign collections. For such purpose, from 2006 S/S to 2011 F/W, 5185 pictures were collected from designer's photos of Seoul, Paris, Milan, NY, and London collections. The content analysis and statistical analysis using SPSS will be conducted for data analysis. The results of the research are as follows. First, regarding the design features, square-form silhouette, achromatic colors, and none pattern were presented as well. Second, there were significant differences in the design characteristics of each year. Particularly, in 2008, X-form silhouette, Yellow and Green color, and flower pattern were emphasized. Third, the design features by season were significant differences. In S/S season, square-form and X-form silhouette, achromatic colors of white and gray color, none pattern were evident while in F/W season, square-form Silhouette, achromatic colors of black and gray, and none pattern were emphasized. Fourth, the design features by designer are as follows. In terms of form, Seoul collection was influenced by Paris collection. In terms of colors, it was influenced by NY and London collections.

• Korean Institute of Interior Design Journal
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2007

A prototype design process visualization and guidance system, is being developed. Its purpose is to visualize the design process in more intuitive manner so that one can get an insight to the complicated aspects of the design process. By providing a tangible utility to the design process performed by the expert designers or guided by the system, novice designers will be greatly helped to learn how to approach a certain class of design. Not only as an analysis tool to represent the characteristics of the design process, the system will be useful also for learning design process. A design ontology is being developed to provide the system with a knowledge-base, representing designer's activities associated with various design information during the conceptual design process, and then to be utilized for a computer environment for design analysis and guidance. To develop the design ontology, a conceptual framework of design activity model is proposed, and then the model has been tested and elaborated through investigating the nature of the early conceptual design. A design process representation model is conceptualized based on the ontology, and reflected into the development of the system. This paper presents the development process of the visualization system, modeling of design process ontology, and how the system could be utilized for the analysis and learning of conceptual design methods using computer mediated design support environment.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.327-330
• /
• 2003

The objectives of this study are to develope the automatic design programs to offer the data when constructing a small scale vinyl-house by region. This program consists of four subroutines. The first is an automatic greenhouse modeling program, the second is a calculating design load program by region, the third is a structural analysis program and the last is a optimum shape design program. The structural analysis can be conducted by simple date input and considering the design load of the install regions into account. The shape of input data is very simple, and the program reflects the design load by region. The output data can be obtained from the automatical calculation processing after structural analysis. The program was verified by compared with outputs of a common use structural analysis program and the results are the same. It was concluded that the developed program could be used efficiently in optimum design of small scale vinyl house.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.11-18
• /
• 2002

The purpose of this study was to investigate the characteristic and composition factor of Japanese costume design. The stimulus were 25 contemporary costume design which represented the traditional image of Japanese. The main survey of questionary consisted of their evaluation of the Japanese costume image by 26 semantic differential bipolar scales and the subjects were 99 female students majoring in clothing and textiles. The data were analyzed by Factor analysis, Multidimensional Scaling Method and Regression Analysis. The major findings were as follows. As a result of design analysis, contemporary Japanese costume design which represented the traditional image had traditional form, color, texture, pattern, etc. Through factor analysis about Japanese costume image 7 factors were identified; Attractiveness, Attention, Cool and warm, Neatness, Activeness, Maturity, Classics. According to image positioning, Japanese costume design was classified by simple-decorative, soft-hard. As the result of regression analysis, The preference of Japanese costume image was related to attractive factor.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.5-9
• /
• 2015

Reliability based limit state design method is replacing traditional deterministic designs such as allowable stress design and/or ultimate strength design methods in world trends. European design code(Eurocode) has adopted limit state design, and Korea road bridge design standard has also recently been transferred to limit state design method. In this trend, Korea railroad design standard is also preparing for adopting the same design concept. While safety factors are determined empirically in traditional design, load combinations as well as load factors are determined by solving limit state equations. General partial safety factors are evaluated by using AFORM(Advanced First Order Reliability Method) in the reliability based limit state design method. In this study sensitivity analysis is carried out for a dead load factor and a live load factor. Relative precisions of the dead load and the live load factors are discussed prior to the AFORM analysis. Furthermore the sectional forces of design and the material quantities required by two different design methods are compared for a PSC box girder railway bridge.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.118-124
• /
• 2002

The use of ceramic inserts in hot extrusion dies offers significant technical and economic advantages over other forms of manufacture. In this paper, process simulation and stress analysis are thus combined during the design, and a data exchange program has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process. The shrink fit analysis has been performed that enables optimal design of the dies taking into account the elastic deflections which generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the die design. The stress analysis of the dies is used to determine the stress conditions on the ceramic insert by considering contact and interference effects under both mechanical and thermal loads. The results are compared with the experimental ones for verification.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.27-39
• /
• 2004

In the first part of this study, five homogeneous regions in view of topographical and geographically homogeneous aspects except Jeju and Ulreung islands in Korea were accomplished by K-means clustering method. A total of 57 rain gauges were used for the regional frequency analysis with minimum rainfall series for the consecutive durations. Generalized Extreme Value distribution was confirmed as an optimal one among applied distributions. Drought rainfalls following the return periods were estimated by at-site and regional frequency analysis using L-moments method. It was confirmed that the design drought rainfalls estimated by the regional frequency analysis were shown to be more appropriate than those by the at-site frequency analysis. In the second part of this study, LH-moment ratio diagram and the Kolmogorov-Smirnov test on the Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Logistic (GLO) and Generalized Pareto (GPA) distributions were accomplished to get optimal probability distribution. Design drought rainfalls were estimated by both at-site and regional frequency analysis using LH-moments and GEV distribution, which was confirmed as an optimal one among applied distributions. Design rainfalls were estimated by at-site and regional frequency analysis using LH-moments, the observed and simulated data resulted from Monte Carlotechniques. Design drought rainfalls derived by regional frequency analysis using L1, L2, L3 and L4-moments (LH-moments) method have shown higher reliability than those of at-site frequency analysis in view of RRMSE (Relative Root-Mean-Square Error), RBIAS (Relative Bias) and RR (Relative Reduction) for the estimated design drought rainfalls. Relative efficiency were calculated for the judgment of relative merits and demerits for the design drought rainfalls derived by regional frequency analysis using L-moments and L1, L2, L3 and L4-moments applied in the first report and second report of this study, respectively. Consequently, design drought rainfalls derived by regional frequency analysis using L-moments were shown as more reliable than those using LH-moments. Finally, design drought rainfalls for the classified five homogeneous regions following the various consecutive durations were derived by regional frequency analysis using L-moments, which was confirmed as a more reliable method through this study. Maps for the design drought rainfalls for the classified five homogeneous regions following the various consecutive durations were accomplished by the method of inverse distance weight and Arc-View, which is one of GIS techniques.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.976-986
• /
• 2000

The purpose of this study is to clarify the relationship between the visual sensibility and the decorative design of clothing. 41 kinds of costume samples have been selected from photographs in fashion magazines under detail and trimming, and divided into three types according to line, shape, and form. I have measured these images by using Semantic Differential method. The obtained data were analyzed by factor analysis ANOVA, discriminant analysis, regression analysis and MDS. The results of analysis are as follow; 1. Factor analysis has extracted five factors which consist of decorative design sensibility. These factors are Attractiveness, Hardness and Softness, Rhythm, Decorativeness, Cuteness. 2. There were significant differences in visual evaluation of decorative design and demographics 3. The discrimination among formative designs was closely related to decorative image, especially between line and form. 4. The Image effect on Preference, Buying needs, Riches and Pleasant was consist of complicated sensibility. 5. Evaluative dimensions of decorative design were identified by Simple-Complicated, Cubic -Plane perceptive image differed in degree of similarity in spite of same formative design.