• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.235-244
• /
• 2011

The purpose of this study is to investigate whether the appropriateness of gustatory features in product design affect product evaluation and accompanied response by using functional magnetic resonance imaging(fMRI). Through the pilot survey, we categorized the product designs into two groups based on the level of the appropriateness. The total of 40 product designs were selected as the experimental stimuli. 15 right-handed participants(mean age = 23.33, SD = 1.7) were scanned with 3T MRI machine(ISOL Tech, Oxford OR63). The experimental stimuli were passively presented inside the scanner. In post scanning session, participants were asked to measure their preference and buying intention to the product designs. The results show that both the preference and buying intention were significantly higher for the high appropriateness condition compared to those of low appropriateness designs. Caudate nucleus and putamen, areas related to the positive reward such as monetary acquisition showed greater activation in response to the designs of high appropriateness condition, compared to the low appropriateness designs.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.459-471
• /
• 2009

The purpose of the study is to examine the effect of VMD image appropriateness in apparel shopping contexts. Two competing models are utilized. The first model is developed from the emotion-cognition theory which explains that environmental cues(i.e., VMD image appropriateness) generate consumers' emotion, and in turn, consumers' behaviors. The second model is developed based on the cognitive theory of emotions and posits that environmental cues stimulates consumers' cognitive perceptions of retail environments, subsequently influencing consumers' emotional and behavioral response. A 2(VMD image appropriateness: high vs. low) between-subjects factorial design experiment was conducted. Female college students(n=592) participated in the experiment. Using structural equation modeling the study found that the emotion-cognition model better explains the effect of VMD image appropriateness on consumers' emotional, cognitive, and behavioral responses.

• Fashion & Textile Research Journal
• /
• v.21 no.5
• /
• pp.640-655
• /
• 2019

Technology status was investigated by analyzing patents and development cases of wearable robots. Development direction of wearable robot for wearability was also suggested by understanding the problems of wearability from development cases through the FGI technique. The number of patents per technical field was the most in the field of strength support, but AI in the technology field was different in each country; Korea was found to be poor in the category of daily living assistance. The number of patents by technology category was the most in the category of muscular strength assistance. However, the values of AI in the technology category were different in each country; Korea was found to be poor in the category of daily living assistance. Development cases were focused on rehabilitation, so development is not fulfilled uniformly by use purpose. By wearing body parts, robots with single function type were mainly developed. Rigid material robots were mainly developed. It was confirmed that wearable robot technology is not developed evenly in the category of application because it is in the early stage of the technical proposal and centered on main performance improvement. We derived twelve wearable conditions for wearable robots: Shape and Size Appropriateness, Movement Appropriateness, Composition Appropriateness, Physiological Appropriateness, Performance Satisfaction, Ease of Operation, Safety, Durability, Ease of Dressing, Ease of Cleaning, Portability and Ease of Storage and Appearance Satisfaction. Finally, the development direction of a wearable robot for each wearable condition was suggested.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.91-99
• /
• 2015

Reviewing the previous researches related to SW quality, we find that they are mostly quality evaluation models for SW quality improvement and maturity-design models for software project management evaluation. There are few studies for the appropriateness of SW quality management by Quality Control(QC) functions. Moreover, they are bound for government's SW R&D projects in the view of the third party. Therefore, we propose means for the objective evaluation of SW quality management's appropriateness by QC functions. For this reason, there are three research proposes in our study as follows. Firstly, we produce problems for the evaluation of the existing government's SW R&D project management's appropriateness. Secondly, to overcome the drawbacks for the evaluation of the appropriateness of SW quality management, new appropriateness evaluation methods are proposed. Lastly, we investigate the availability and effectiveness of the appropriateness evaluation methods for WBS projects.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.141-146
• /
• 2004

Apartment, which have become the major housing style in Korea, have contributed to the development of housing culture as well as achieved a growth in volume. However, the demands and characteristics of residents have not been reflected in the apartment. because it has been developed only for a growth in volume. In this society, apartments need to be developed for resident. Therefore, the purpose of this study is analyzing apartment design factors and examining the appropriateness of apartment residents. To do so, questionnaire research is conducted and 90 questionnaires are analyzed for this study. The questionnaire mainly consists of questions about residential appropriateness of each space, and reaction and coping behavior on the inappropriate residential environment.

• Journal of the Korean Society of Systems Engineering
• /
• v.20 no.1
• /
• pp.16-25
• /
• 2024

By deriving the limitations of the test evaluation, it was intended to suggest a plan to improve the test evaluation system for the appropriateness of the number of ship crews according to the design and construction of troops-saving ships. Currently, the number of crew members by ship type is confirmed and specified in the ROC(Operation Requirement Performance) in the early stages of design, such as conceptual design, but there is a limit to testing and evaluating the appropriateness of ensuring reliability of combat performance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.209-216
• /
• 2004

Numerical analysis is carried out to identify the appropriateness of the design codes that is available for the tensile design of fastening system at Nuclear Power Plant (NPP) in this study. This study is intended for the cast-in-place anchor that is widely used for the fastening of equipment in Korean NPPs. The microplane model and the elastic-perfectly plastic model are employed for the quasi-brittle material like concrete and for the ductile material like anchor bolt as constitutive model for numerical analysis and smeared crack model is employed for the crack and damage phenomena. The developed numerical model is verified on a basis of the various test data of cast-in-place anchor. The appropriateness of both ACI 349 Code and CCD approach of CEB-FIP Code is evaluated for the tensile design of cast-in-place anchor and it is proved that both design codes give a conservative results compared with real tensile capacity of cast-in-place anchor.

• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.50-56
• /
• 2014

The quantification of fire size in buildings must be preceded in order to design the trial of performance based design (PBD). When design fire size is determined appropriately, the trial design will become economical and safe design against fire risk. There are many problems in determining design fire size because of lacks of fire engineering data and short history of PBD in korea. Therefore, this paper has surveyed the guideline of design fire in other countries, real experimental data for a few occupancies and the cases of design fire size determining for PBD in Korea. Also, it has proposed the guideline of design fire size for various occupancies in korea after analyzing the appropriateness of design fire size.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.66-81
• /
• 2016

This study is designed to understand the problems of existing Korean male soldiers' winter uniform tops by researching its current state, and contribute to developing uniforms with improved size and motion appropriateness. Military bases were visited to research satisfaction of size and motion appropriateness of the current winter uniform tops. 193 soldiers were surveyed and interviewed, and the shape and fit of the standard sizes of the inner and outer layers of the current winter uniform were analyzed. Findings of this study are as follows. 1) Compared to the new combat uniforms that soldiers were wearing in their appropriate size (of the 44 sizes), there were many cases where the soldiers were not wearing winter uniform inner (of the 8 sizes) or outer (of the 18 sizes) layers in the correct size for their body. 2) A total of 37 combat uniform sizes appropriate for the body shapes were expected to be newly applied, and inside and outside layers of winter tops would be presented as sets of 14 different sizes in step with the new combat uniform sizes, instead of the existing 8 inside layer sizes and 18 outside layer sizes. 3) The inner and outer layer of the existing winter uniform tops had several problems with the shape and fit. First, the inner layer was shorter than the combat uniform. Its shoulder width was wide, but the sleeve length was short creating lack of coverage, and the angle connecting the sleeve and bodice was very small creating a high sleeve cap curve and narrow sleeve width that make motions difficult and cause discomfort. As for the outer layer, the hem moved up when soldiers bent over or adjusted the waist string so the top could not sufficiently cover, the shoulder width was wide and the sleeve length was short, requiring improvements.