• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.869-887
• /
• 2008

Coffer dam for tunnel type spillway in inflow section of Dae-am dam was originally planned as 2 lines sheet piles with Water Zet method. But, the result of pilot test was caused of some problems that vibration during installation of pile could pollute water and water leakage could the lower part. So, sheet piles was not satisfactory for faculty of coffer dam. Structural instability of sheet pile system need to reinforcement. Characteristic of Dae-am dam was small reservoir capacity but wide drainage area, of which it was judgment that security of leakage and stability was difficult during excavation of inlet part. So, we consider that water curtain method utilized with in site pouring concrete pile method was designed at weir part of spillway. We were known about basement rock that geological boring was carried out in weir part. After taking a deep consideration, PRD method was accepted as a new method. Concrete pile by PRD was installed to below country rock. CJM method was carried out with PRD. After making concrete wall using Top-down method, earth anchors were installed for supporting it. According to the result of numerical analysis, as water level rises, wall is stable.

• 한국해안·해양공학회논문집
• /
• 제27권5호
• /
• pp.281-294
• /
• 2015

해상 풍력발전체 최적설계에 필요한 파력과 풍력의 비선형 상쇄 간섭 생성기작을 규명하기 위해 5MW급 해상풍력 발전체를 대상으로 1/50 scale로 수리모형실험을 수행하였다. 해상풍력 발전체의 하부구조물은 시공이 용이하여 가장 선호되는 mono pile로 선정하였다. 돌풍은 Kaimal 스펙트럼과 상호스펙트럼에 기초한 Monte carlo 모로 재현하였으며, 모의결과를 토대로 순간 최대풍속은 10 m/s로 조정하였다. 파고는 해상풍력 시범단지가 예정되어있는 우리나라 서해안 해역의 파황을 고려하여 $H_s=0.1m$, 0.15 m, 0.2 m로 선정하였다. 수리모형실험 결과, 파력과 풍력의 비선형 상쇄 간섭은 해역이 거칠수록 보다 확연하게 관측되었으며, 이러한 결과는 해수면 요철로 인해 대기와 해수면의 경계에서 출현하는 Large eddy가 비선형 상쇄 간섭의 생성 기작이라는 우리의 추론을 뒷받침한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.551-557
• /
• 2007

본 논문은 도시철도공사 시 하저통과구간의 지반투수저하공법에 대한 연구결과이다. 본 연구에서는 하저지반의 투수저하공법들 중 특히 주입공법에 대하여 연구의 초점을 두었다. 이에 따라 하저지반 투수저하를 위하여 적용되고 있는 기존주입공법들의 이론적 배경과 시공방법들을 문헌과 시공사례자료 등을 고찰하여 비교 분석하였다. 이와 같이 다양한 고찰을 통하여 주입공법들을 하저통과 도시철도터널 안전시공 측면에서 평가하였다. 또한 분석 결과로부터 하저지반에서 장단기적으로 안전하게 지반수리거동을 도모하기위한 주입공법의 설계기법에 대하여 제시하였다. 이와 같이 하저지반 투수저하주입공법들의 평가결과를 근거로 하저통과 터널공사 시 안전시공과 완공 후 터널구조물의 장기적인 안전유지관리 측면에서 적용성이 양호하다고 판단되는 N.D.S(Natural Durable Stabilizer)공법과 S.M.I(Space-Multi- Injection Grouting) 공법을 제시하였다. 그러나 이 두공법의 실질적인 시공효과를 평가하기위하여 OO지역에 건설예정인 하저통과 도시철도터널공사구간에서 시험시공을 실시하였다. 시험시공기간 중에는 실내 및 현장에서 지반투수특성시험을 실시하여 시공전후의 지반의 투수성저하효과를 평가하였으며, 두공법의 시험시공결과는 이론적인 배경과 함께 비교 분석하였다. 결론적으로 S.M.I공법의 경우 N.D.S공법보다 투수성 저하효과가 큰 것으로 나타났다. 즉, 주입공법에 있어서 시멘트 무기질계 재료보다는 비 알카리성 실리카 졸계가 투수저하 효과를 더 크게 할 수 있을 것으로 판단되었다. 끝으로 본 연구결과로부터 특히 철도터널설계시 하저지반의 투수저하 증대를 위한 주입공법 설계기술발전에 공헌 할 것이다. 값을 가지며 표준 편차가 작았다 PR와 $SpO_2$는 두 그룹 모두 정상범위내의 값을 보였다. 점막하 주사를 이용한 Midazolam의 추가 투여는 안전성을 크게 침해하지 않는 범위 내에서 진정 깊이를 깊게 해주며 안정적인 진정을 이루게 함으로써 보다 바람직한 진정을 유도해 줄 수 있는 것으로 사료된다.보이지 않았다.tag의 표면에 형성된 뚜렷한 측부 가지들도 발견되었다.}60cm$에 위치시켜 표면선량의 over dose나 under dose의 발생 방지를 위한 주의가 반드시 필요하겠다.군의 전단결합강도가 가장 낮았다.본에서 III군에 비해 크기가 큰 기포가 더욱 많이 관찰되었다.e의 약동학은 cimetidine에 의해 유의한 차이를 보였으며 CYP1A2유전자형에 따른 영향은 관찰할 수 없었다. CYP1A2유전자형에 따른 생체내 대사능을 관찰하는 실험이 향후 이루어 져야 할 것으로 사료된다.san film보다 큰 수증기 투과도를 보였다.적으로 유의한 차이를 보이지 않았다.y tissue layer thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되었다.한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glyc

• 한국응급구조학회지
• /
• 제26권3호
• /
• pp.161-184
• /
• 2022

연구 목적: 본 연구는 화재 현장에서 발생한 심정지 소방관의 소생률 향상을 위하여 화재진압대원을 위한 심폐소생술 훈련프로그램(FD-CPR)을 개발하고자 하였다. 연구 방법: 행동주의 이론을 전제로 한 FD-CPR 교수설계 모형을 3단계(분석, 설계, 개발) 절차에 따라 개발하였으며, 7명의 전문가 집단(응급의학과 교수 1인, 응급구조학과 교수 1인, 교육학과 교수 1인, 소방학교 교수 2인, 현장 활동 15년 이상 대원 2인)의 내용 타당도 검증(CVI)과 예비 실험을 거쳐 완성하였다. 연구 결과: 7개 절차로 구성된 시나리오 및 16개 항목으로 구성된 수행 능력 평가도구를 개발하였다. 평가도구의 난이도는 평균 41.16%, 변별도는 0.32로 나타나 난이도가 고르며, 변별도가 높은 것으로 확인되었다. 이후, 총 80분짜리 훈련프로그램을 개발하였고, 전문가 7인의 내용 타당도 검증 결과 1.0으로 높았다. 결 론: 본 연구를 통해 국내 처음으로 개발된 화재진압대원을 위한 기본 심폐소생술 훈련프로그램은 화재진압대원들의 심폐소생술 수행 능력 향상에 효과가 있는 것으로 나타났다. 이에 소방학교 신규 화재진압대원 교육과정에 본 프로그램을 넣게 된다면, 심폐소생술에 대한 반복훈련이 이뤄질 수 있으므로 심폐소생술의 수행 능력은 유지될 것이고, 나아가 심정지 동료의 소생률 향상에도 이바지할 수 있을 것으로 기대한다.

• 산경연구논집
• /
• 제10권7호
• /
• pp.39-48
• /
• 2019

Purpose - The purpose of this study was to explore the impact of chatbots' innovation attributes on the innovation acceptance for consumers who have used chatbots to purchase fashion products that account for a large share of transactions in mobile shopping. Research design, data, and methodology - Data were collected from Korean consumers aged 20 to 49 who had experience using chatbots when purchasing fashion-related products via mobile circumstances. After a pilot survey of 31 customers, pre-questionnaire was revised for the final test, and the final questionnaire was distributed to 1,500 subjects. Out of these, 244 were retrieved. After excluding 48 inappropriate responses, 196 were used for statistical analysis. Frequency analysis, exploratory factor analysis, one-way ANOVA, regression analysis and independent t-test using SPSS 23.0 were employed for data analyses. Results - First, four factors of chatbots' attributes were extracted: relative advantages and compatibility, complexity, sensibility, and diversity. Second, two factors were extracted for fashion leadership: fashion opinion leadership and fashion innovativeness. Two groups based on the fashion leadership were identified: active innovation adopters and passive innovation adopters. Third, relative advantages and compatibility, diversity, sensibility of innovation attributes were found to have effects on the innovation acceptance in order. Fourth, significant differences were found in sensibility of innovation attributes and innovation acceptance in groups by marital status and age. The married in their 30s and 40s perceived sensibility as a more important attribute of chatbots than the unmarried in their twenties. Among the groups of different income levels, meaningful differences were found in diversity of innovation attributes and innovation acceptance. Fifth, there were significant differences found in relative advantages and compatibility, sensibility of innovation attributes, and acceptance of Innovation among the groups by fashion leadership. Active innovation adopters were found to be more aware of the importance of relative advantages and compatibility, and sensibility of innovation attributes, and innovation acceptance. Conclusions - The present study provides chatbots' marketing strategies for fashion items need to be modified by demographic characteristics and fashion leadership. Particularly, fashion leadership was found to be an important factor in determining the perception of innovation attribute as well as innovation acceptance.

• 재활간호학회지
• /
• 제4권1호
• /
• pp.31-45
• /
• 2001

The purpose of this study was to investigate the relationship between self-concept and self-care activities of the cerebral palsied adolescents and to gain the baseline data for development of effective rehabilitation nursing intervention program of the cerebral palsied adolescents. The design of this study was a descriptive correlational study. The subjects of the study were 160 cerebral palsied adolescents attending at special schools located in Seoul and Kyonggi and rehabilitation centers located in Seoul, Kyonggi and Kyongnam province. The data was collected from May 20 to July 20, 2000. The instrument used for this study were the self-concept scale(50items 4point scale) and self-care activities scale(29items 4point scale). Self-Concept Scale had developed by Fitt(1965), which was standardized by Chung(1968) and modified by Kim(1984). Self-Care Activities Scale developed by the researcher through out the consulting of expert and pilot study on the basis of ADL check list developed by Kang(1984) and LDSQ-3(Lambeth Disability Screening Questionnair-3) developed by Na et al. (1995). The data was analyzed by the SPSS/PC+program using frequency, percentage, mean, standard deviation, t-test, ANOVA & Scheffe test and Pearson's correlation coefficient. The results of this study were as follows; 1. The mean score of self-concept was $138.55{\pm}17.20$(range: 50-100), which the item mean score was $2.77{\pm}0.34$(range: 1-4). The score of subarea of the self-concept was the highest score in family self ($3.01{\pm}0.54$) and the lowest score in physical self ($2.52{\pm}0.42$). 2. The mean score of self-care activities was $95.25{\pm}21.69$ (range: 29-116), which the item mean score was $3.28{\pm}0.75$ (range: 1-4). The score of subarea of the self-care activities was the highest score in feeding($3.75{\pm}0.59$) and the lowest score in walking($2.64{\pm}1.21$). 3. There were statistically significant difference in the score of self-concept according to the age (F=3.24, P=.04), the grads (F=4.36, P=.01), and types of cerebral palsy (F=2.42, P=.03). 4. There were statistically significant difference in the score of self-care activities according to the age (F=8.29, P=.00), the grads (F=16.05, P=.00), types of living place (F=6.46, P=.00), types of cerebral palsy (F=48.92, P=.00), whether or not receiving a rehabilitation therapy (t=-3.64, P=.00), whether or not receiving a vocational training (t=2.14, P=.03), and whether or not using a device (t=-7.42, P=.00). 5. There was not significant correlation between self-concept and self-care activities (r=.081, P=.311).

• 대한치과보철학회지
• /
• 제51권2호
• /
• pp.82-89
• /
• 2013

연구 목적: 본 연구는 양극산화 임플란트에 골형성단백질과 혈관내피세포성장인자를 코팅한 임플란트를 토끼의 경골에 식립하여 골과 임플란트 계면의 골유착 향상의 가능성을 평가하고자 시행하였다. 연구 재료 및 방법: 6마리의 토끼 양측 경골에 코팅을 하지 않은 양극 산화 임플란트(대조군)와 골형성단백질과 혈관내피세포성장인자를 코팅한 임플란트(실험군)을 각각 한쪽에 2개씩 식립하였다, 토끼는 2주, 8주에 각각 3마리씩 희생하였고 전체 식립된 임플란트는 24개이었다. 각 시기별, 그룹별 임플란트 수는 각각 6개씩이었다. 임플란트안정지수(resonance frequency analysis (RFA)), 회전 제거력(Removable torque measurement (RTQ))을 희생 시기에 측정하였다. 독립표본 t-test (SPSS Ver. 15.0, Chicago, USA)을 이용하여 2주, 8주에서 대조군과 실험군의 차이를 비교 분석하고, 유의수준95%에서 통계적으로 검정하였다. 결과:대조군과 실험군 모두 8주에서 우수한 골유착을 보였다. 특히 실험군에서 8주에 ISQ, RTQ 값 모두 대조군과 비교하여 우수한 값을 나타내었다 (P<.05). 하지만 2주에서는 두군 사이에 통계적 유의성을 보이지 않았다(P>.05). 결론: 골형성 단백질과 혈관내피세포성장인자를 임플란트 표면에 코팅하여 식립하는 것은 치유의 후반기에 골유착을 증대하는 것으로 사료된다.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Asia pacific journal of information systems
• /
• 제19권2호
• /
• pp.179-193
• /
• 2009

As the common saying attests, a publish-or-perish world, publishing is absolutely critical for academic researchers' successful careers. It is the most objectively-accepted academic performance criteria and the most viable way to attain public and academic recognition. Asia Pacific Journal of Information Systems(APJIS) has been recognized as the most influential domestic journal in Korean MIS field since July, 1991. Therefore, publishing in APJIS means your research is original, valid, and contributive. While most researchers learn how to publish an article in APJIS through a repetitive review process, thereby improving their chance of the' accepted' through their personal trial and error experiences, such valuable lessons and know-how tend to be kept personally and rarely shared. However, useful insights into research and publication skills could be also gained from sharing others' errors, neglect, and misjudgments which are equally critical in improving researchers' knowledge in the field (Murthy and Wiggins, 2002). For this reason, other academic disciplines make systematic efforts to examine the paper review process of major journals and share the findings from these studies with the rest of the research community members (Beyer et al., 1995; Cummings et al, 1985; Daft, 1995; Jauch and Wall, 1989; Murthy and Wiggins, 2002). Recognizing the urgent need to provide such type of information to MIS research community in Korea, we have chosen the most influential academic journal, APJIS with an intention to share the answer to the following research question: "What are the common problems found in the manuscripts either 'rejected' or 'required a major revision' by APJIS reviewers?" This study analyzes the review results of manuscripts submitted to APJIS (from January, 2006 to October, 2008), particularly those that were 'rejected' or required a 'major revision' at the first round. Based on Daft's(1995) study, twelve most-likelihood problems were defined and used to analyze the reviews. The twelve criteria for classification, or "twelve problems", are as follows: No theory, Concepts and operationalization not in alignment, Insufficient definition--theory, Insufficient rationale--design, Macrostructure--organization and flow, Amateur style and tone, Inadequate research design, Not relevant to the field, Overengineering, Conclusions not in alignment, Cutting up the data, and Poor editorial practice. Upon the approval of the editorial board of APJIS, the total 252 reviews, including 11 cases of 2005 and 241 cases from July, 2006 to October, 2008, were received without any information about manuscripts, authors, or reviewers. Eleven cases of 2005 were used in the pilot test because the data of 2005 were not in complete enumeration, and the 241 reviews (113 cases of 'rejection' and 128 ones of 'major revision') of 2006, 2007, and 2008 were examined in this study. Our findings show that insufficient rationale-design(20.25%), no theory(18.45%), and insufficient definition--theory(15.69%) were the three leading reasons of 'rejection' and 'major revision.' Between these two results, the former followed the same order of three major reasons as an overall analysis (insufficient rationale-design, no theory, and insufficient definition-theory), but the latter followed the order of insufficient rationale--design, insufficient definition--theory, and no theory. Using Daft's three major skills-- 'theory skills', 'design skills', and 'communication skills'-- twelve criteria were reclassified into 'theory problems', 'design problems', and 'communication problems' to derive more practical implications of our findings. Our findings show that 'theory problems' occupied 43.48%, 'design problems' were 30.86%, and 'communication problems' were 25.86%. In general, the APJIS reviewers weigh each of these three problem areas almost equally. Comparing to other disciplines like management field shown in Daft's study, the portion of 'design problems' and 'communication problems' are much higher in manuscripts submitted to the APJIS than in those of Administrative Science Quarterly and Academy of Management Journal even though 'theory problems' are the most predominant in both disciplines.