• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.38-46
• /
• 2008

Design technology and speciality production technology to manufacture high quality valve are insufficient in Korea. In order to design the experiments using Taguchi method and Variational Technology Also, from verification of the response model with optimized results was confirmed that usefulness and reliance of application Taguchi method and Variational Technology to structural's optimum design using Taguchi method and Variational Technology.

• The Korean Journal of Applied Statistics
• /
• v.7 no.1
• /
• pp.83-102
• /
• 1994

Some optimal designs and data analysis methods based on a Gaussian spatial linear model for computer simulation experiments are considered. For designs of computer experiments, Latin-hypercube designs and some optimal designs are combined. A two-stage computational (2-points exchange and Newton-type) algorithm for finding the optimal Latin-hypercube design is presented. The spatial prediction model which was discussed by Sacks, Welch, Mitchell and Wynn(1989) for computer experiments, is used for analysis of the simulated data. Moreover, a method of contructing sequential (optimal) Latin-hypercube designs is considered. An application of this approach to the quality improvement and optimization of the integrated circuit design via the main-effects plot and the sequential experimental strategy is presented.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.88-98
• /
• 1992

Real automobiles have been utilized to study the occupant behaviors and the response of the structures in the crash environment. Since various parameters are involved in the automobile crashworthiness, a number of experiments must be conducted. The experiments have been contributed to increasing the cost due to the fact that the test is quite expensive. Therefore, computer simulation is adopted to reduce the number of experiments. A few computer programs have been developed specifically to solve the occupant responses in the crash environment. In this research, a software is used to study the occupant dynamic analysis. A modeling of occupant analysis is established for a passenger car and the results are verified through comparisons with real experiments. In the modeling, data are tuned very carefully so that simulated results such as HIC(Head Injury Criterion) and acceleration of each body may approximate to the experimental results. The compared experiment is a barrier test which is carried out by frontal impact. A feedback to the design process is suggested from the result of this research.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.813-818
• /
• 2009

Design analysis and computer experiments (DACE) model is widely used to express efficiently nonlinear responses in the field of engineering design. As a DACE model, kriging model can approximately replace a simulation model that is very expensive or highly nonlinear. The kriging model is composed of the summation of a global model and a local model representing deviation from the global model. The local model is determined by correlation coefficient with the pre-sampled points, where the accuracy and robustness of the kriging model depends on the selection of proper correlation coefficients. Therefore, to achieve the robust kriging model, the range of the correlation coefficients is explored with respect to the degrees of the global model. Based on this study we propose the proper orders of the global model and range of parameters to make accurate and robust kriging model.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.701-705
• /
• 2008

Design analysis and computer experiments (DACE) model is widely used to express efficiently the nonlinear responses in the field of engineering design. Kriging model, a DACE model, can approximately replace a simulation model that is very expensive or highly nonlinear. The kriging model is composed of the summation of a global model and a local model representing deviation from global model. The local model is determined by correlation coefficient of the pre-sampled points, where determination of the correct correlation coefficient has an effect on accuracy and robustness of the kriging model. Therefore, robustness of the correlation coefficient is explored with respect to degrees of the global model. Then we propose the range of correlation coefficient to make correct and robust kriging model and the influence of the correlation coefficients on the degrees of global model with respect to the nonlinearity of the pre-sampled responses.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.1-10
• /
• 2020

The seal plays a role in preventing oil leakage when the lip and the rotating shaft come into contact with the fluid and air pressure. Recently, micro dimples or micro pockets are processed and used on the lubrication surfaces of thrust bearings, mechanical bearings, and piston rings. Compared to a smooth surface, micro dimples reduce friction and increase the life of parts. This paper analyzed various kinds of micro dimple shapes on the sealing surface, i.e. circle, rectangle, triangle, and trapezoid. For this purpose, Introduced the design of experiments to work out a micro dimple configuration, unlikely to be damaged from cracks and low in contact stress. As a result, the triangular dimple showed the best results. Optimal factors were dimple size 0.15 mm, dimple depth 0.0383 mm, dimple density 40%, and the maximum equivalent stress was 9.1455 MPa, and the maximum contact pressure was 9.6612 MPa. This paper analyzed the optimal shape of dimples by finite element analysis. As a research project, experiments and comparative analysis of micro dimple shapes are needed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.28-34
• /
• 2007

In design stage of vehicles, the application of virtual durability analysis techniques enables us to cut down the necessary time and cost to carry out various physical experiments. In this study, computer simulations of vehicle suspensions were carried out with DADS program including component flexibility, and the durability analysis of vehicle components was executed with MSC/Fatigue program using the load history obtained from vehicle dynamic simulation. Driving test of a vehicle was also carried out to obtain precise input data for the durability analysis, and the results of virtual durability analysis were compared to those of experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.799-806
• /
• 2004

This paper presents a scheme for finding an optimal combination of design parameters affecting on the handling performance of a large truck using design of experiments. The average of the sum of peak-to-peak roll angles at the first and second part of the double lane is used as an objective function for design of experiments. Six design parameters are selected from all possible parameters affecting on the handling performance. The table of orthogonal arrays is made by 27 times simulations. A computational model of a large truck is developed by MSC/NASTRAN and MSC/ADAMS, and verified the reliability of it with the results of vehicle tests performed in a double lane change course. It is used for the simulations. Analyses of variance and factor effect of the table of orthogonal arrays are performed. This paper proposes an optimal combination of those six design parameters for improving the handling performance of the large truck.

• IE interfaces
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.1
• /
• pp.90-98
• /
• 1990

The liquid ejector, having no moving, lubricating and leaking parts, is widely used as the various pumps because of its high working confidence and simplicity. Previously, computer aided design program for the small-sized liquid ejector was developed based on the one-dimensional flow analysis and the systematical laboratory level experiments. Through the present research, it is confirmed that the previously developed computer program to getermine the main design dimensions and to calculate the expected performance curve is satisfactorily applied to design the large liquid ejectors.