• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.606-612
• /
• 2011

At the product design and development stage, the main criteria selecting a design alternative were performance aspect as well as cost aspect of a product. Ongoing new paradigm shifts such as low carbon green growth, climate change mitigation, sustainable society development urged considering environmental aspect of a product at the product design and development stage. Up to recently, only cost aspect except performance of a product was considered at the railway vehicle design process. Therefore, it is needed to develop a method that may consider environmental aspect of a product at the railway vehicle design process. Lee (2011) proposed that a method of an integration assessment of environmental aspect and cost aspect based on GHG emission instead of based on monetary value. This study conducted that apply the method of Lee (2011) to design alternative selection process of a railway vehicle. From the integrated view of environmental and cost aspect, the reference product and design alternatives are assessed and compared.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• Journal of Ocean Engineering and Technology
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2021

As increasing the international community's awareness of greenhouse gas reduction, the demand for eco-friendly ship fuel has accelerated recently. The fundamental aim of this study is to develop a new type of fully electrified ferry for passengers and cars considering Korean domestic coastal environmental conditions. Several technical difficulties are encountered in applying a fully electric propulsion system based on removable battery systems into a ship due to limitations imposed by the batteries' size and capacity. This paper reviews and analyzes marine environment regulations strengthened recently, technology trends related to fully electric propulsion vessels in each country, and Korean domestic coastal environments. We propose a new fully electrified car ferry design with a displacement of 400 t applied in Korea. It is powered by removable battery systems pre-charged in a safe inland charging station. The mobile battery system is developed to enable roll-on and roll-off using wheels. The characteristics of the ship motion are analyzed based on the weight and location of the battery systems. We expect our battery systems to be applicable to larger ships in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.2 s.109
• /
• pp.111-121
• /
• 2005

The Seoul Housing Corporation pronounced an alternative design competition and a bidding for Eunpyeong New Town in December of 2004. At first many construction companies were interested in the first New Town Project. But at last a few companies had proposed the alternative design and construction cost. This project needed a conjunction of design ideas and technology know-hows. And the client wanted the brand power of construction company. Ultimately the Corporation hoped that the first New Town Project will end up with high quality successfully. This competition had started with the original construction drawings. Then it needed some alternative ideas and the lowest cost. There were two drawings of non changeable part and changeable part. Non changeable parts are structure like housing unit plan, underground parking lots. Changeable parts are outdoor layout, interior design and building facade. So we tried all ideas of landscape technology and design principles within limited guidelines. The author applied new technology like tilted rooftop greening and sustained container greening on high-rise apartment house. This green technology will be the first trial in Seoul and in the world as well. Daewoo Corporation have accumulated greening technology through the researches by national funding since 2002. Through this New Town Project the green technology will go forward step by step.

• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.191-198
• /
• 2014

PURPOSES : Safety consciousness can be the first factor to hinder the acceptance of design alternative, which moderates the applied design criteria in order to adapt the road to the natural terrain condition. METHODS : The method which enables to check the safety of design alternative by using design consistency concept is suggested. The method is based on the linked or interactive analysis between terrain and road alignment. Real design example is considered as a guide how to apply the method and the analysis result is discussed with the future research. RESULTS : Suggested method can be used for designers as a tool to review their design outputs can be safe as much as the original design. So, designers have the more objective judgement on their designs and have the confidence on their designs. CONCLUSIONS : The method is expected to be used as a tool to see the safety consciousness in an objective view, so any possible conflicts between designers and design-related personnels caused by the terrain-oriented design can be solved.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.29-38
• /
• 2012

The current building energy efficiency rating certification regulation on apartment houses evaluates only the saving rate of energy consumed during operation, i.e. use, of a building, but doesn't consider the energy consumptions and environmental load($CO_2$) emissions occurring during the whole lifetime of a building. So this study calculated the energy consumptions and environmental load emissions occurring during the whole lifetime of a building, selected reference schemes and alternative items by design variables to present a design draft considering energy efficiency and environmental performance, and evaluated the total cost by combining and calculating its direct cost(material and heating cost) and indirect cost(environmental cost), for an existing apartment house as an evaluation object. As a result of analysis, the change of heating cost by alternative items of design variables showed a 4~8% change rate compared to the reference scheme, and the material cost of design variable 7 showed a maximum 4.4 times change rate in the alternative plan 6 compared to the reference scheme. The environmental cost showed a similar change rate to the material cost change rate in general, but showed a similar environmental cost change rate to the heating cost change rate in case of design variables 4-1, 4-2, 7.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.37-48
• /
• 2000

Universal design is an approach to create environments and products that recognizes the diversity of users, regardless of their ability or age. Recently, old person and disabled person rapidly go on increasing in number. So, universal design concept becomes more and more important in product and environment, etc. In this study, we dealt with the universal design problem of microwave oven considering old persons. New design model for microwave oven was developed and evaluated using human factors approach. The principles of universal design was developed through literature survey and questionnaire survey for old persons, and then design alternatives were developed according to these principles. Two experiments were performed in this study. The purpose of the first experiment was to select final design alternative and the experiment was performed using rapid prototypes. The second one was a usability testing for the real model of final alternative. In this experiment, the real model was compared with the existing real product. As the result, the new design model was a little more excellent than the existing model in usability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2015

Optimizing multiple design characteristics which are usually in conflict with each other in the injection molding process is frequently becoming a critical problem for designers who work in this area. The purpose of this work is to develop an automated design methodology for optimizing two such design characteristics found in injection-molded parts. A value function based on decision-making theory is used as a means of evaluating the performance of a two-characteristic design alternative. Also, a design space reduction algorithm based on Taguchi's orthogonal arrays is utilized to discover an optimal design alternative. Verification of the developed design methodology is carried out for an actual model with two design characteristics, the weld line and the gate location, to be optimized in computer simulation experiments.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.05a
• /
• pp.28-29
• /
• 2005