• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.1-9
• /
• 2022

Peeling and dimensional deformation that occur during a manufacturing process are accompanied by an increase in the manufacturing cost and production time caused by manufacturing defects. In order to solve this problem, it is essential to predict risk factors at the design stage through computational analysis of the additive manufacturing process and to control shape distortion due to residual stress. In this study, the dimensional characteristics were improved by applying the distortion compensation design through computational analysis to minimize the distortion occurring in the DMLS(Direct Metal Laser Sintering) method of the metal additive manufacturing process.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.110-121
• /
• 2001

During hot pipe bending using induction heating, the wall of bending outside is thinned by tensile stress. In design requirement, the reduction of wall thickness is not allowed to exceed 12.5%. So in this study, two methods of bending, one is loading of reverse moment and the other is loading of temperature gradient, have been investigated to design pipe bending process that satisfy design requirements. For this purpose, finite element analysis with a bending radius 2Do(outer diameter of pipe) has been performed to calculate proper reverse moment and temperature gradient to be applied. Induction heating process has been analyzed to estimate influence of heating process parameters on heating characteristic by finite difference method. Then pipe bending experiments have been performed for verification of finite element and finite difference analysis results. Experimental results are in good agreement with the results of simulations.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.30-38
• /
• 2011

Personal creativity could be promoted and improved through many experience, training and various prior knowledge. This researcher had proceeded several preceding studies to find effective using methods of analogy for creativity enhancement. This study, following work of preceding studies aims to verify the effects of verbal and visual analogy for creativity improvement. Effect verification had been progressed by comparing the residential design results of two groups which are classified an experimental group consisted of sophomore college students with a comparative group consisted of sophomore university students. Consequently, the experimental group that had undergone many training on verbal and visual analogy in several preceding studies is superior to the comparative group in terms of creative design rate, sketch rate with high quality. Through this result it is verified that the using methods of verbal and visual analogy is very effective on creativity enhancement in interior design process. But the limitation of this study is that there were a few populations. Nevertheless, interdisciplinary this study will be used as a practical one to suggest a model on a teaching method and a theory for creativity improvement in interior design education.

• Journal of the Korean Society of Costume
• /
• v.65 no.1
• /
• pp.46-60
• /
• 2015

This study analyzed the process of development and verification of standards through the competency analysis of fashion accessories products in the development of 'National Competency Standards'(NCS), which was carried out in 2013 for the fashion industry. The NCS for fashion accessories production was developed through three Focus Group Interviews (FGIs) and fashion accessories production was defined as "the process of design, development and manufacture intended to produce items that improve the degree of completion of fashion products that are produced from textile fabric, knitted fabric, leather and other materials such as bags, belts, hats, gloves, scarves, neckties and socks with the exception of clothes". The competency unit for fashion accessories production was analyzed in 11 categories: development of design; development of materials; production of prototype samples; calculation of cost; determination of mass production model and price; planning of main manufacture process; ordering of materials; planning for mass production; preparation for mass production; mass production; and inspection of completed products, and the verification was carried out on development outcomes through a survey carried out of on-site personnel. This study recommends the following direction for future improvements based on an analysis of the development process of the NCS for fashion accessories production. First, future development of standards should first provide a rational category system for each area of fashion good production based on the production process, which should be followed by a detailed competency survey. Second, in order to ensure a more efficient verification survey, an expert for each competency unit should be designated for the develop standard to induce a more sincere response. Also the questionnaire should require supplementation in order to collect the various additional opinions of experts of the field. Finally, this study concludes that it is urgent to procure an education infrastructure and specialized professors in order to apply the competency standard for fashion accessories production to the education sector. This study also concludes that the government will be required to provide systematic and consistent support aimed at supplementing development and forming a firm collaborative working environment for the industry and academia in order to improve the current education environment and build a more field-oriented education environment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.38-46
• /
• 2008

Design technology and speciality production technology to manufacture high quality valve are insufficient in Korea. In order to design the experiments using Taguchi method and Variational Technology Also, from verification of the response model with optimized results was confirmed that usefulness and reliance of application Taguchi method and Variational Technology to structural's optimum design using Taguchi method and Variational Technology.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.356-365
• /
• 2007

The development in the design process is usually based on the choice of a method for designing the system, in which this method is frequently faced with tightening environmental requirements, reducing development cycle times and growing complexity. To tackle such factors, the paper proposes a comprehensive approach focusing on applying systems engineering approach to the building design support. In particular, this paper addresses all capabilities of using some available systems engineering standards (like EIA-632) in the design process. Then, a methodological approach is proposed for the practice of requirements engineering by applying quality assessment and control to design in early phase. The paradigm used, here is to extend and particularly to adapt the work carried out in military and space systems to modern building services by taking into account the semantics of buildings in terms of different engineering fields and architecture issues.

• The Journal of Information Systems
• /
• v.27 no.3
• /
• pp.25-42
• /
• 2018

Purpose The purpose of this study focused on adopting production systems in cognitive psychology to improve the extraction process of persuasive design characteristics for healthcare-related mobile applications. Design/Methodology/Approach A research approach with four stages was developed. We developed and updated the evaluation guideline for persuasive design characteristics (PDC). We tried to summarize and analyze each of 28 PDC and prepared related production rules. Verification process for both guideline approach and production system approach were performed. Top one hundred apps from both medical category and health and Fitness category were selected and evaluated by two approaches. By comparing the results of the two approaches, we tried to explain the improvement and reliability of introducing the production system in the PDC extraction process. Findings Based on the updated guideline for healthcare-related mobile applications, a production system in cognitive psychology was developed. By comparing the PDC extraction results by two approaches, production system showed a better improvement for evaluation precision and efficiency for decision-making process. The findings of this study can be used for researchers and app developers to apply production system to analyze, evaluate, and develop better healthcare-related apps with persuasion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.80-89
• /
• 1998

Propulsion subsystem transfers KOMPSAT into mission orbit and controls its attitude. Design factor consists of structure safety, electrical circuit design, consumable power estimation of thermal hardwares, damping device design of fuel transient pressure, and system configuration design by considering plume effect from thruster firing. System level analysis should be performed for verification of system design under launch vehicle and orbital environment. Electrical functional test of thermal control hardware, proof pressure test, cleanliness verification test, and internal/external leakage test of fuel feeding system should be carried out for performance estimation of propulsion system. Design and assembly process of propulsion subsystem was depicted and reliability of system was verified by test analysis in this paper.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.631-639
• /
• 2019

Purpose: In this paper we present a case study of applying quick and easy experimental design approach to develop a Halogen free flame retardant material for cellular phone charger cable. Methods: We employ sequential experimentation of mixture design, verification design, and factorial design. A quick and easy approach is adopted based on data investigation and graphical method instead of strict statistical analysis, which helped enhancing smooth communication with the engineers and speeding up the development process. Results: Flame retardant material in pellet type produced from the optimal condition is transported to the customer and tested, to pass the customer retardancy criteria. Conclusion: The quick and easy experimental design approach is considered to be useful in this case study.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.14-23
• /
• 2013

Fault management design of the satellite describes preparations for failures which can occur during operational phase. Fault management design contains detection and isolation function of anomaly, and also it contains function to maintain the satellite in safe condition until the ground station finds out a cause of failure and takes a countermeasure. Unlike normal operation, safing operation is automatically performed by Power Control and Distribution Unit and Integrated Bus Management Unit which loads Flight Software without intervention of ground station. Since fault management operation is automatical, fault management logic and functionality of relevant hardware should be thoroughly checked during ground test phase, and error which is similar to actual should be carefully applied without damage. Verification test for fault management design is conducted for various subsystems of satellite. In this paper, we show the design process of fault management design verification test for Electrical Power Subsystem and Attitude and Orbit Control Subsystem of Low Earth Orbit satellite flight model and the test results.