• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1342-1354
• /
• 2016

As Internet, and hardware technology are in rapid process, using rate and penetration rate of Internet of Things are increasing. Internet of Things is the physical objects with network which embedded with electronics, software, sensors, and network. Smart Home-kit to operate refrigerators, washing machines, light bulbs, and such internet of things by a smartphone has been realized. However, it is difficult to use a good quality of software based on IoT. It is because that the study related to quality evaluation of software based on IoT is deficient compared with increase amount of IoT devices. Software based on IoT includes mobility, transportability, real time accessibility and hardware characteristics. Therefore, it is necessary to have differentiated quality standards and quality model. Software quality evaluation model for IoT is proposed to satisfy these needs. Evaluation model is mapped by characteristics of IoT software based on ISO/IEC 25000's quality characteristics. Scenario based studies were applied to quality model for verification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.147-153
• /
• 2020

Developments in aircraft require safety verification through flight testing for many hours with prototype design and production. The test evaluation step of performing flight tests was an important process that determines the success in the development of the system. In particular, safety development through flight tests in the armed flight test is important for the development of attack helicopters. In the development of attack helicopters, the evaluation period and cost related to the armed flight test are closely related to the required ammunition requirement. Therefore, this paper presents the amount of ammunition required for the military flight test between attack helicopter developments through an analysis of the AH-1 helicopter in a similar case and ADS-44-HDBK of military specification. The AH-1 can be used to calculate the ammunition demand by considering the exclusion of redundant firing tests and configuration differences. In the case of the machine gun-equipped configuration, approximately 10,500R was required, and approximately 324R was required in the case of a rocket-mounted configuration. In addition, if the armed integrated bench is used properly, it is expected to promote efficiently the flight test in the armed flight by identifying the possible risk factors with armed flight tests and excluding them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.537-544
• /
• 2016

National Competency Standards (NCS) need to be introduced to train newly hired staff and to gradually improve employees' work performance in the information security industry. In particular, the introduction of a new NCS curriculum for new hires is important in order to retain and efficiently manage professionals in the information security field. However, the legacy NCS is not clearly designed for the information security field. So a formal curriculum has been suggested for institutions training the information security workforce. Therefore, this study establishes a competency unit based on the types of personnel, their duties, and required knowledge. To select the competency unit, this study reviewed prior research to understand the required skills and work knowledge, and reviewed recruitment-based NCS that public agencies and public and private companies have carried out, including them in the study. The selected competency unit was classified into a required competency unit and an elective competency unit based on the importance of the duties and the demands of training. Through a verification process for the new, licensed career path model in the NCS information and communications field, this study suggests updated NCS competency units and required courses to provide an appropriate NCS curriculum for newly hired employees in the information security industry.

• Spatial Information Research
• /
• v.12 no.1
• /
• pp.13-27
• /
• 2004

The current industrial development and the increase of population in Daecheong Reservoir basin have produced a rapid increase of wastewater discharge. This has resulted in problem of water quality control and management. Although many efforts have been carried out, reservoir water quality has not significantly improved. In this sense, the development of water quality management system is required to improve reservoir water quality. The goal of this study is to design a GIS-based water quality management system for the scientific water quality control and management in the Daecheong Reservoir. For general water quality analysis, WASP5 model was applied to the Daecheong Reservoir. A sensitivity analysis was made to determine significant parameters and an optimization was made to estimate optimal values. The calibration and verification were performed by using observed water quality data for Daecheong Reservoir. A water quality management system for Daecheong Reservoir was made by connecting the WASP5 model to ArcView. It allows a Windows-based Graphic User Interface(GUI) to implement all operation with regard to water quality analysis. The proposed water quality management system has capability for the on-line data process including water quality simulation, and has a post processor far the reasonable visualization for various output. The modeling system in this study will be an efficient NGIS(National Geographic Information System) far planning of reservoir water quality management.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.251-262
• /
• 2007

The purpose of this research is to develop a Geological Information System(GIS) in order to store, manage and display geochemical data observed from references of recently domestic granite. There is still no use in geochemical and mineralogical information such as REE(rare earth element), trace elements, mode data(modals or mineral composition) and major elements. Therefore, we need to construct the standardized database system for the analytical data of granites through the verification of its data in South Korea. To construct the information system for geochemical and mineralogical information of granites in South Korea. Firstly, we collected the existing research data related digital map data. Secondly, we extract granite polygons to digital geological map and convert the polygon to points in South Korea. Thirdly, we considered both database schema and symbols of REE elements, trace elements, modal data and major mineral. Fourthly, we carried out all sorts of process to build granite database for GIS statistic analysis and visualization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.461-470
• /
• 2020

This study analyzed the determinants of land compensation costs using the CALS (Continuous Acquisition & Life-Cycle Support) system to generate data for the construction (planning, design, building, management) process. For analysis, variables used in the related research on land costs were used, which included eight variables (Land Area, Individual Public Land Price, Appraisal & Assessment, Land Category, Use District 1, Terrain Elevation, Terrain Shape, and Road). Also, the variables were analyzed using the machine learning-based Xgboost algorithm. Individual Public Land Price was identified as the most important variable in determining land cost. We used a linear multiple regression analysis to verify the determinants of land compensation. For this verification, the dependent variable included was the Individual Public Land Price, and the independent variables were the numeric variable (Land Area) and factor variables (Land Category, Use District 1, Terrain Elevation, Terrain Shape, Road). This study found that the significant variables were Land Category, Use District 1, and Road.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.112-126
• /
• 1996

This study was conducted to develop an optimal runoff bydrograph model by comparison of the peak discharge and time to peak between observed and simulated flows derived by four different models, that is, linear time-invariant, linear time-variant, nonlinear time-invariant and nonlinear time-variant models under the conditions of heavy rainfalls with regionally uniform rainfall intensity in short durations at nine small watersheds. The results obtained through this study can be summarized as follows. 1. Parameters for four models including linear time-invariant, linear time-variant, nonlinear time-invariant and nonlinear time-variant models were calibrated using a trial and error method with rainfall and runoff data for the applied watersheds. Regression analysis among parameters, rainfall and watershed characteristics were established for both linear time-invariant and nonlinear time-invariant models. 2. Correlation coefficients of the simulated peak discharge of calibrated runoff hydrographs by using four models were shown to be a high significant to the peak of observed runoff graphs. Especially, it can be concluded that the simulated peak discharge of a linear time-variant model is approaching more closely to the observed runoff hydrograph in comparison with those of three models in the applied watersheds. 3. Correlation coefficients of the simulated time to peak of calibrated runoff hydrographs by using a linear time-variant model were shown to be a high significant to the time to peak of observed runoff hydrographs than those of the other models. 4. The peak discharge and time to peak of simulated runoff hydrogaphs by using linear time-variant model are verified to be approached more closely to those of observed runoff hydrographs than those of three models in the applied watersheds. 5. It can be generally concluded that the shape of simulated hydrograph based on a linear time-variant model is getting closer to the observed runoff hydrograph than those of three models in the applied watersheds. 6. Simulated hydrographs using the nonlinear time-variant model which is based on more closely to the theoritical background of the natural runoff process are not closer to the observed runoff hydrographs in comparison with those of three models in the applied watersheds. Consequently, it is to be desired that futher study for the nonlinear time-variant model should be continued with verification using rainfall-runoff data of the other watersheds in addition to the review of analyical techniques.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.34-45
• /
• 2004

Existing Semangeum's water balance analysis simplifies whole basin to single basin and achieved volume of effluence that produce by Kajiyama way to foundation. But Semangeum is complicated and various rice-wine strainer supply system. And there is difficulty to apply as elastic when water balance element is changed at free point. Divided to unit possession station for suitable water balance analysis model application to Semangeum in this study. And developed basin water balance model of GIS base that can do details analysis is bite about development and transfer of an appropriation in the budget of basin water resources. Achieved study including abstraction and concept design that use UML (unified modeling language) diagram for details analysis, stream network composition for rice-wine strainer supply system application, preprocessing of GIS base and postprocessing module development, model revision and verification etc. Support of this water balance analysis model is available to establish efficient water resources administration plan through outward flow process analysis of water resources. And support is considered to be possible in more convenient and, reasonable water resources administration way establishment by minimizing manual processing in systematic water resources government official to user and support diversified analysis system.