• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.13-27
• /
• 2019

While temporary construction work applies to a temporary facility, it has a high use frequency during the construction period accounting for around 10% of the construction cost, it requires systematic management. However, construction inspection information of temporary construction work often has no special specification in the design documents and specification items, with the items on various standards also being formidable. Because of this, related inspection are likely to be performed inefficiently with a high probability for occurrence of human errors when quality inspection is conducted for the temporary construction work. In the present study, therefore, apply to the electronic operation support system capable of supporting implementation of inspection of providing related information for the contemporary construction work. To achieve this, a prototype is developed by using IDEF0 to identify information flow by process and organizing EPSS-based quality inspection Task. And then, efficiency of the quality inspection and information accessibility for temporary construction work are to be improved by verification method of Sample Project.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.675-680
• /
• 2018

In this paper, we propose a hand gesture recognizer using restricted coulomb energy (RCE) neural network, and present hardware implementation results for real-time learning and recognition. Since RCE-NN has a flexible network architecture and real-time learning process with low complexity, it is suitable for hand recognition applications. The 3D number dataset was created using an FPGA-based test platform and the designed hand gesture recognizer showed 98.8% recognition accuracy for the 3D number dataset. The proposed hand gesture recognizer is implemented in Intel-Altera cyclone IV FPGA and confirmed that it can be implemented with 26,702 logic elements and 258Kbit memory. In addition, real-time learning and recognition verification were performed at an operating frequency of 70MHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.289-299
• /
• 2019

Attitude control modeling and simulation (M&S) can be extensively applied in overall development process, from simple algorithm design to on-board software verification. This paper introduces CMG-based attitude control M&S software, which consists of 6-DOF modeling (CMG and space environments modeling), and attitude control algorithm. The M&S software is divided into three modules, from an inner CMG motor control module to an outer earth observation mission module. While an application of this developed software is currently limited to the initial-phase attitude controller development, its application area can be extended to the later-phases by considering sophisticated model information in future.

• The Korean Journal of Franchise Management
• /
• v.11 no.4
• /
• pp.31-44
• /
• 2020

Purpose: The purpose of this study is to examine the effects of CEO's self-determination on entrepreneurship, business performance (operational and financial performance). Also, this research provide some strategic insights for improving business performance. In the proposed model, self-determination consists of autonomy, competence, and relatedness, and entrepreneurship consists of innovation, initiative and risk sensitivity, and proactiveness. More specifically, this study proposes a framework that entrepreneurship and operational performance will play mediating roles between self-determination and financial performance. Research design, data, methodology: In this study, an online survey was conducted on SME CEOs for analysis, and a total of 122 samples were used. In the analysis process for hypothesis verification and evaluation, frequency analysis was first performed to identify the demographic characteristics of the respondents, and confirmatory factor analysis was conducted to assess the reliability and validity of the measurement model. In addition, a structural model analysis was conducted to examine the structural relationships between CEO's self-determination, entrepreneurship, and business performance (operational and financial performance) using SmartPLS 3.0. Results: The findings and summary are as follows. First, the autonomy of self-determination has a positive effect on entrepreneurship. Second, the competence of self-determination affects entrepreneurship and operational performance. Third, it affects the innovation, initiative and risk sensitivity of the CEO's entrepreneurship, and ultimately, its operational performance. The results show that the business performance of Start-up also increases when self-determination can be a factor in increasing entrepreneurship in three sub-dimensionalities. Conclusions: The conclusion of this study is that in order for SMEs to develop into a sustainable company by securing competitiveness after start-up, external motivation such as external help and support from the state (local government) is important, but competence and relationship, which are components of self-determination. The intrinsic motivation of the CEO may be more important. To this end, CEO's should prioritize learning for competency development, and the government should pay attention to providing various educational programs through establishment of education policies and education systems to enhance the competency of start-up CEO's.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.809-817
• /
• 2020

In the design and development process of Small-Sat power distribution and transmission module, the stability of dynamic resources was evaluated by a deep learning algorithm. The requirements for the stability evaluation consisted of the power distribution function of the power distribution module and demand module to the SAR radar in Small-Sat. To verify the performance of the switching power components constituting the power module PDM, the reliability was verified using a dynamic neural network. The adoption material of deep learning for reliability verification is the power distribution function of the payload to the power supplied from the small satellite main body. Modeling targets for verifying the performance of this function are output voltage (slew rate control), voltage error, and load power characteristics. First, to this end, the Coefficient Structure area was defined by modeling, and PCB modules were fabricated to compare stability and reliability. Second, Levenberg-Marquare based Two-Way NARX neural network Sigmoid Transfer was used as a deep learning algorithm.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.257-264
• /
• 2022

As it takes a lot of time and money to develop an aircraft, an environment for renovating and using existing operating aircraft has been created. As a result, many old aircraft were renovated, and due to the aging of the aircraft, more demanding cable requirements were required for renovation projects, and as the number of equipment inside the aircraft gradually increased, the difficulty of system integration increased. In order to solve the difficulties of system integration through systematization of verification procedures, this paper explains VSWR, I-loss, which are the main indicators of antenna cable modification, and explains DTF, one of the problem detection methods. It also explains the elements required for cable design, the environment to be measured, and procedures, and introduces the overall process and effect of antenna cable improvement through demonstration cases.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.1-18
• /
• 2022

A conceptual site model is used to support decision-making of response strategy development, determination, and implementation within a risk-based contaminated site management system. It aims to provide base information of the relevant site characteristics and surface/subsurface conditions in order to understand the contaminants of concern and the associated risk they pose to the receptors. This study delineated the technical details of conceptual site model development, and discussed the possibility of applying it in domestic subsurface contamination management. Conceptual site models can be developed in various formats such as tables, diagrams, flowcharts, and figures. Contaminated sites are managed for a long period of time following the steps of investigation, remediation design, remediation, verification, and post-remedation management. The conceptual site model can be enhanced in each stage of the contaminated site management based on the continuously updated information on the site's subsurface environment. In the process of enhancement for conceptual site model, precision is gradually improved, and it can evolve from a conceptual and qualitative form to a more quantitatvive and three-dimensional model. In soil pollution management, it is desirable to incorporate the conceptual site model into the soil scrutiny system to better assess the current status of the contaminated site and support follow-up investigation and management.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.185-194
• /
• 2022

Avionics equipment requires various environmental conditions and performance during development, and as a countermeasure against such development risk, the worst-case circuit analysis(WCCA) is applied to predict perform preliminary performance analysis. WCCA calculates the maximum and minimum values by combining the parameter values of the relevant circuit after deriving the parameter values in consideration of the aging of the temperature and operating period at the component level. In this paper, the necessary matters for WCCA application are described. Chapter 2 describes the differences and characteristics of the WCCA techniques EVA, RSS, and Monte Carlo.Chapter 3 introduces the analysis process through the example circuit to introduce the actual analysis procedure. Chapter 4 describes the method of selecting an analysis technique for each condition of the analysis target. As a result of applying the procedures and analysis methods introduced in this paper when open, it was confirmed that preliminary performance analysis and part optimization design verification are possible.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.102-110
• /
• 2023

The MATS(Missile Assembly Test Set) is manufactured and used to check the function of the missile during the period of development for the guided missile system, and the requirements for power and communication are managed for equipment production. The MATS developer implements software according to the proposed communication standard to guarantee the reliability of the data that communicates with the guided missile. The test bed is built and self-performance evaluation is performed after implementation. And the verification process is performed using the standard equipment. The characteristics of periodic delay for data transmission must be reflected when building a test bed. This paper describes a test bed construction method for data processing with periodic delay. Also This paper compares and evaluates the performance by changing the previously designed algorithm.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.105-114
• /
• 2024

Clinical laboratories endeavor to secure quality by establishing effective quality management systems. However, laboratory environments are complex, and single quality control procedures may inadequately detect many errors. Patient-based real-time quality control (PBRTQC) is a laboratory tool that monitors the testing process using algorithms such as Bull's algorithm and several variables, such as average of normal, moving median, moving average, and exponentially weighted moving average. PBRTQC has many advantages over conventional quality control, including low cost, commutability, continuous real-time performance monitoring, and sensitivity to pre-analytical errors. However, PBRTQC is not easily implemented as it requires statistical algorithm selection, the design of appropriate rules and protocols, and performance verification. This review describes the basic concepts, methods, and procedures of PBRTQC and presents guidelines for implementing a patient-based quality management system. Furthermore, we propose the combined use of PBRTQC when the performance of internal quality control is limited. However, clinical evaluations were not conducted during this review, and thus, future evaluation is required.