• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1077-1084
• /
• 2002

Optimum tool design is carried out fur a multi-stage rectangular cup deep-drawing and ironing process with the large aspect ratio. Finite element simulation is carried out to investigate deformation mechanisms with the initial design made by an expert. The analysis considers the deep drawing process with ironing for the thickness control in the cup wall. The analysis reveals that the difference of the drawing ratio within the cross section and the irregular contact condition produce non-uniform metal flow to cause wrinkling and severe extension. For remedy, the modification guideline is proposed in the design of the tool and the process. Analysis results confirm that the modified tool design not only improves the quality of a deep-drawn product but also reduces the possibility of failure. The numerical result shows fair coincidence with the experimental one. After tryouts of the tool shape, the rectangular cup has been produced in the transfer press.

• 디지털콘텐츠학회 논문지
• /
• 제17권5호
• /
• pp.425-432
• /
• 2016

스마트 교육을 위해 교사가 스스로 3D 융합 콘텐츠를 쉽게 제작할 수 있는 저작도구는 거의 없다. 본 연구는 스마트 교육을 위한 교사용 인터랙티브 3D 융합 콘텐츠 저작도구를 제안하고 설계하였다. 이를 위해, 스마트 교육 환경에서 교사의 저작환경을 조사하고, 교사들의 요구사항을 조사하였다. 이런 조사를 바탕으로, 스마트 교육을 위한 3D 융합 콘텐츠 저작도구의 기능요건과 설계안을 도출하였다. 현장 교사 그룹을 통해 도출된 설계안의 만족도 조사를 실시하였다. 본 연구 결과를 토대로 스마트 교육을 위한 인터랙티브 3D 융합 콘텐츠 저작도구를 구현할 예정이다.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.457-464
• /
• 2016

This study proposes a bi-directional buck-boost converter controller design method for ESS using the MATLAB SISO tool. The conventional two-loop controller design is based on a continuous S-domain model that designs each controller independently. The demerit of the conventional method is that optimal performance is not easily achieved and extensive trials and errors are required because two-loop systems interact with one another. Using the MATLAB SISO tool based on the design method proposed in this work overcomes the disadvantages of the conventional method. In the proposed method, the SISO tool can select the location of the poles and zeroes of the open loop system, thereby facilitating the effective design of a high-performance controller. The design sequence is detailed systematically, and the performance of the method is verified with a computer simulation and 10 kW experimental system.

• 한국정보통신학회논문지
• /
• 제14권12호
• /
• pp.2707-2715
• /
• 2010

본 논문에서는 MVC 패턴에 기반한 클래스 다이어그램 저작도구의 설계와 구현을 제시하고자 한다. 클래스 다이어그램 저작도구의 설계는 ClassInformation, ScreenDisplay, ToolManager에 대한 정의를 하고 구조를 기술한다. ClassInformation은 다이어그램의 정보를 가공하거나 처리하는 부분을 담당한다. ScreenDisplay는 저작도구의 화면을 구성하기 위해서 GUI를 담당한다. ToolManager는 저작도구의 입출력 처리위해 이벤트 처리를 담당한다. MVC 패턴을 바탕으로 저작도구의 ClassInformation, ScreenDisplay, ToolManager는 각각의 역할이 독립적으로 나눠져 있고, 결합도를 낮추기 때문에 새로운 기능 추가에 유연하게 대처한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.175-178
• /
• 2003

Tool life in cold forging is influenced by tool quality as well as forging conditions and quality of forging material. This paper presents some typical examples of tool life improvement in aspect of tool quality depending on tool design and tool manufacturing parameters. For the purpose of improving tool life, suggestions should be based on accurate understanding of tool operating conditions in cold forging process. FE simulation known as CAE is effective in order to make clear the conditions by some numerically calculated result.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.133-140
• /
• 2004

Recently reduction of industrial products in size and weight has been increased by application of micro-drills in gadgets of high precision and a great interest of a micro-drilling has been raised. Due to the lack of tool stiffness and the chip packing, the micro-drilling requires not only the robust tool structure which has not affected by vibration but also effective drilling methods designed to prevent tool fracture from cutting troubles. This paper presents an optimum design shape of a 0.15 mm micro-drill associated with a new manufacturing process to improve the production rate and to lengthen the tool life and suggestions on the micro-drilling characteristic properties associated with the tool life and workpiece quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.67-70
• /
• 2000

The tool life is not long enough under sever forming condition in warm forging. The tool life is affected by wear heat fatigue plastic deformation and so on. Especially wear is one of the most serious factors for tool life. To increase tool life we should consider various factors like processing design die design die materials lubrication and cooling system This study design to obtain the steady state temperature of die by FEM analysis under several conditions of cooling. There are four cooling conditions in this study no cooling internal cooling external cooling and both internal and external cooling. With above obtained temperatures tool life is predicted using Archard's model that is considered softening of die. The effect of internal cooling system is better than that of externally cooled die. To predict the die life the steady state temperature is calculated by using mean temperature of die. Considering only wear the die life much longer as the cooling effect is bigger. The more accurate die life will be predicted if we consider heat crack as well as wear.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.57-63
• /
• 1998

In this paper, a design tool using continuum design sensitivity analysis (DSA) method has been developed for noise, vibration, and harshness (NVH). Design sensitivity is formulated, implemented numerically, and named SENS1. SENS1 can compute the design sensitivity using model and response files of MSC/NASTRAN of vehicle. A of real vehicle model is considered to validate SENS1. Numerical study shows SENS1 is a useful tool to improve NVH performances of vehicle body.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.694-697
• /
• 2005

The design of experiments are used for optimal design of formed tools to machine automobile bearing rubber seal die, which is classified into the high precision rubber mold. The clearance angle, rake angle and the length cutting edge are considered as the factors. The cutting force is selected to be a characteristic value and compared with the mean tool wear and life by repeated experiments. The design of the experiment is based on the repeated one-way factorial design, which finds the significance of the factors and the best level to predict the tool life by using ANOVA and regression.

• Journal of Information Technology Applications and Management
• /
• 제10권4호
• /
• pp.29-50
• /
• 2003

This research provide the basic information to enhance the user-orientedness of usability design guidelines for software products and an effective empirical guidance to classify design attributes of internet shopping mall sites. The results of analysis show that design attributes can be classified into the procedural attribute group, the shopping tool attribute group, the visual attribute group, linguistic attribute group, and others. The results show that shopping tool attribute group can be divided further into the search tool attribute group and purchase tool attribute group and that the visual attribute group can be divided further into the screen condition attribute group and the character legibility attribute group. The research reveals that when designers design software interfaces and features they should take the compound effect of a group of design attributes into consideration to enhance the usability of the system.