• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.89-96
• /
• 2007

It is well known that the test and evaluation plan (TEP) is very crucial in the successful development of safety-critical systems. As such, this paper discusses an approach to the development of the TEP for a system that should meet safety requirements in the systems development process. It is studied how to incorporate the result of preliminary hazard analysis (PHA) in generating the safety requirements. It is also discussed how to deal with them when the system requirements (i.e., functions, performance, constraints, components, etc) and the safety requirements are integrated into one model. While doing so, we have constructed the required traceability among them, which is necessary and very useful when the safety requirements need to be corrected or be changed. The use of the traceability makes it possible to easily check out whether and how the safety requirements are properly incorporated in the system design process. Furthermore, without the verified traceability, the system cannot be changed or upgraded later. In order to implement the model on a computer-aided tool, we have constructed a database (DB) schema. As a result, the implemented model/DB allows to automatically generate TEP which can be used to measure the performance and safety level of the developed system.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.233-243
• /
• 2021

Purpose: The study focused on localization of the enhanced applique armor kit (EAAK), which are applied to Korea Assault Amphibious Vehicle (KAAV). Methods: For this propose, we developed the manufacturing technology by analyzing the original products. Considering the conditions used in the military, we made the test evaluation criteria. Results: In results, The EAAK developed through this research performs equivalent performance compared to Rafael, Co. Thus, It is possible not only stably supply a parts of EAAK for maintenance, but also to reduce costs due to import substitution effect. Conclusion: It is expected that the manufacturing technology and test evaluation criteria accumulated through this study can be used in the localization of similar parts.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2020

Objective: Physical therapy techniques are required for patients with temporomandibular joint disorder (TMD), but the effects of treatment have not been compared. Therefore, effects of transcutaneous electrical nerve stimulation (TENS) and low level laser (LLL), which are most commonly used interventions, were compared. Design: Randomized controlled trial. Methods: Thirty-six participants with pain in the temporomandibular joint were enrolled, and 12 participants were randomly assigned to either the TENS group, LLL group, or placebo group. Each intervention was performed for a total of 6 sessions for 2 weeks. For the evaluation of the participants, the mouth opening (MO), pressure pain threshold (PPT), and stress were measured at three time periods: baseline, post-test, and follow-up at 2 weeks. Results: Significant interaction between groups according to each evaluation point was found only in PPT-masseter (p<0.05). The evaluation time point at which a significant difference appeared was at the post-test and follow-up at 2 weeks time periods. As a result of the post-test, the LLL group showed a significant improvement compared to the TENS group (p<0.05), and at 2 weeks follow-up, the TENS group showed a significant improvement compared to the placebo group (p<0.05). Conclusions: In this study, an experiment was conducted to compare the treatment effects when TENS, LLL, and placebo were given to patients with TMD. In addition, by quantitatively presenting the effect size of each treatment, this study suggests clinical use of TENS and LLL treatment for TMD.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.5
• /
• pp.400-408
• /
• 2023

The tracking accuracy of buoy-based LBL(Long Base Line) systems can be significantly influenced by sea environmental conditions. Particularly, the position of buoys that may have drifted due to sea currents. Therefore it is necessary to predict and optimize the drifted-buoy positions in the deploying step. This research introduces a free-drift simulation model using ocean data from the European CMEMS. The simulation model's predictions are validated by comparing them to actual sea buoy drift tracks, showing a substantial match in averaged drift speed and direction. Using this drift model, we optimize the initial buoy layout and compare the tracking performance between the center hexagonal layout and close track layout. Our results verify that the optimized layout achieves lower tracking errors compared to the other two layout.

• Archives of design research
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2000

Rapid prototyping technology has been widely applied to the design process in the industry. This technology made it easy to generate a prototype which acts like a real product in logic. However, this technology has not been validated sufficiently as a usability test method. The purpose of this study was to test the hypothesis : There was no significant difference between a real product and its prototype. An experiment was designed to test it statistically. a microwave oven was selected and its prototype was generated using a rapid prototyping tool. Six subjects used the microwave oven and another six subjects used the prototype to perform five scenario tasks. As a result, there was significant difference between the real product and prototype in success rate, task completion time, and number of buttons pressed. The prototype was more difficult to operate than the real product. Therefore we should be careful when we apply rapid prototyping. technology. In the discussions, the causes of the difference were identified and some guidelines were suggested for who wants to apply rapid prototyping tool to the usability test.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.142-147
• /
• 2009

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean and meteorological observations. It will be tested under vacuum condition and very low temperature in order to verify thermal design of COMS. The test will be performed by using KARI large thermal vacuum chamber, which was developed by KARI, and the COMS will be the first flight satellite tested in this chamber. The purposes of thermal balance test are to correlate analytical model used for design evaluation and predicting temperatures, and to verify and adjust thermal control concept. KARI has plan to use heating plates to simulate space hot condition especially for radiator panels such as north and south panels. They will be controlled from 90K to 273K by circulating GN2 and LN2 alternatively according to the test phases, while the shroud of the vacuum chamber will be under constant temperature, 90K, during all thermal balance test. This paper presents thermal modelling including test chamber, heating plates and the satellite without solar array wing and Ka-band reflectors and discusses temperature prediction during thermal balance test.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.195-201
• /
• 2006

Tower footing resistance and fault current division factor are important design factors for evaluation of the lightning performance of the transmission line and/or design of the grounding electrode system. The periodic measurement of those factors are also important to verify that the grounding performance of the towers has been maintained good. However, the direct measurement of those factors in operating or energized condition is very difficult because of many practical reasons, such as the difficulty of disconnecting overhead groundwires from the tower under test. With supports by GECOL (General Electricitiy Company of Libya), we had a special chance to conduct Fall-Of-Potential (FOP) test on the energized 220 kV transmission towers before and after disconnecting the overhead groundwires from the towers under test. In this paper, the FOP test results on the towers and the fault current division factors estimated from the comparision of the FOP tests with and without overhead groundwires were presented. The computer models for the FOP test simulations were also constructed to find that the simulated results agreed very well with the measured ones.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.159-169
• /
• 2009

The issue of method of software testing process implementation has recently been in the spotlight in korea and some vendor make every effort to improve the software testing process through the evaluation of TMMi. The level of software process is at initial level, nevertheless, so the high quality of software is not guaranteed. This paper apply to the TMMi Level2 Assessment criteria of Automobile control software testing process. The test policy and strategy, test planning, test monitoring and control, test design and execution, test environment goal. The result need to emerge development process connection on the test policy and strategy process, test planning process etc. Also, the study analyzed the infra structure to reach the repeated level via key process area. As the result the process implementation in organization suggests the policy development and the implementation activity. Finally, the practical can refer to this paper in order to implementation the software testing process.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.37-41
• /
• 2012

High-efficiency and low-noise axial flow fan is developed by combining the FanDAS, a computerized axial fan design/performance analysis system, and CFD software(CFX). Based on fan design requirements, FanDAS conducts 3-D blade geometry design, quasi-3D flow/ performance analyses and noise evaluation by using through-flow analysis method and noise models for discrete frequency and broadband noise sources. Through the parametric studies of fan design variables using FandDAS, preliminary and baseline design is achieved for high efficiency and low noise fan, and then can be coupled with a CFD technique such as the CFX code for constructing final and optimized fan design. The FanDAS-CFX coupled system and its design procedure are applied to actual fan development practice. The FanDAS provides an optimized 3-D fan blade geometry, and its predictions on the performance and the noise level of designed fan are well agreed with actual test results.