• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.376-383
• /
• 2017

This paper describes the gyroscopic stability and the drag characteristics of the smart munition with a course correction fuze(CCF). A ballistic analysis was conducted to figure out the effect of the canards on the gyroscopic stability of the projectile. The analysis used the commercial ammunition performance evaluation software: Projectile Design and Analysis System(PRODAS). In particular, we compared the PRODAS analysis results to real field test results to investigate the influence of the CCF mounted projectile. In addition, some ballistic simulations were carried out to provide the conditions suitable for wind tunnel tests. Experimental results show that the added drag force by the canards is almost uniform regardless of the Mach number when the projectile is at the normal position where the angle of rotation and the angle of attack are both 0 degrees. However, as the angle of attack of the projectile increases, the additional drag force depends on the deflection of the canards.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.382-391
• /
• 2005

Increasing of the nonlinear type power electronics equipment, power conditioning systems (PCS) have been researched and developed for many years in order to compensate for harmonic disturbances and reactive power. PCS's not only improve harmonic current and power factor in the ac grid line but also achieves energy saving used by the renewable energy source (RES). In this paper, the implementation of a current controlled voltage source inverter (CCVSI) using RES for PCS is presented. The basic principle and control algorithm is theoretically analyzed and the design methodology of the system is discussed. The proposed system could achieve power quality control (PQC) to reduce harmonic current and improve power factor, and demand side management (DSM) to supply active power simultaneously, which are both operated by the polarized ramp time (PRT) current control algorithm and the grid-interactive current control algorithm. A 1KVA test model of the CCVSI has been built using IGBT controlled by a digital signal processor (DSP). To verify the proposed system, a comprehensive evaluation with theoretical analysis, simulation and experimental results is presented.

• Journal of Distribution Science
• /
• v.17 no.12
• /
• pp.71-79
• /
• 2019

Purpose: This study focuses on lean implementation evaluation in Third Party Logistics (TPL) industry by using the lean principles measurement from Toyota Ways which consist of 14 principles. The core goal of this study is to appraise the lean implementation level in Third Party Logistics in East Java of Indonesia in order to achieve efficient logistics, distribution and transportation activities. Research design, data and methodology: This study uses a sample of 80 respondent who are Third Party Logistics managers in East Java Province, Indonesia. Data collection uses a questionnaire and standard statistical test was performed in order to analyze questionnaire. Results: The implementation level of lean management in Third Party Logistics shows that application of principle 3 (utilizing pull systems) has a higher score than the other principles. This situation shows that management give the best performance in plan process. They prioritize customer requirement in every process designed. However, the principle 8 (using reliable technology) show the weakness performance. Conclusions: Overall, this study shows the Third Party Logistics in East Java Province of Indonesia have applied the lean principle quite well, although the scores are only slightly above the average. This condition provides a strong basis for further lean implementation, especially for improving logistics, distribution and transportation activities in Third Party Logistics Business.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.113-120
• /
• 1992

The construction of container terminal at Brani, Singapore required the improvement of soft clay layer having the thickness of about 6.5m, average moisture content of 79.4%, liquid limit of 90.4%, plastic limit of 21.8%, field vane strength of 10 to 25 KPa, pre-consolidation pressure of 225 to 60 KPa and compression index of 0.4 to 1.0. For the improvement of this layer, Colbon drains of 1.3m spacing in triangular pattern were installed to the bottom of the layer and surcharge of more than 11.25m high sand fill was later applied to the treated area. The settlement and lateral displacement of the ground were measured and the speed of surcharge filling was controlled, based on these readings. The removal of surcharge was determinied using the estimated time for the 90% degree of consolidation under the design pressure of 180KPa. The field and laboratory test results show that the soft clay layer has been improved substantially in its strength and consolidation characteristics: increase in strength of about 50KPa and pre-consolidation pressure and decrease in void ratio and compression index.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.6
• /
• pp.441-450
• /
• 2001

A three stage impactor with the cutoff diameters of 1, 2.5, and 10$\mu\textrm{m}$ in aerodynamic diameter was developed and tested. The gravimetric method and the particle counting method were utilized to evaluate the collection performance of each stage. A vibrating orifice aerosol generator was employed to generate monodisperse test aerosols larger that 2$\mu\textrm{m}$ in diameter. Polystyrene latex (PSL) particles smaller than 2$\mu\textrm{m}$ in diameter were generated by an atomizer and the particle number concentration was measured by an Aerodynamic Particle Sizer Spectrometer. The experimental cutoff diameters obtained from the particle collection efficiency curves are in good agreement with the designed values. The square roots of Stokes number at 50% collection efficiency for stage 1, 2, and 3 are 0.42, 0.48, and 0.45, respectively. Effects of the particle bounce and the impaction plate on the collection efficiency were investigated. The collection efficiency curves including effect of the particle bounce were also compared with those of the MOUDI cascade impactor.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.282-285
• /
• 2007

Satellite observed brightness temperature simulation using a radiative transfer model (here after, RTM) is useful for various fields, for example sensor design and channel selection by using theoretically calculated radiance data, development of satellite data processing algorithm and algorithm parameter determination before launch. This study is focused on elaborating the simulation procedure, and analyzing of difference between observed and modelled clear sky brightness temperatures. For the CMDPS (COMS Meteorological Data Processing System) development, the simulated clear sky brightness temperatures are used to determine whether the corresponding pixels are cloud-contaminated in cloud mask algorithm as a reference data. Also it provides important information for calibrating satellite observed radiances. Meanwhile, simulated brightness temperatures of COMS channels plan to be used for assessing the CMDPS performance test. For these applications, the RTM requires fast calculation and high accuracy. The simulated clear sky brightness temperatures are compared with those of MTSAT-1R observation to assess the model performance and the quality of the observation. The results show that there is good agreement in the ocean mostly, while in the land disagreement is partially found due to surface characteristics such as land surface temperature, surface vegetation, terrain effect, and so on.

• The Korean Journal of Health Service Management
• /
• v.7 no.4
• /
• pp.13-22
• /
• 2013

The purpose of this study was to identify the influencing types of stress and coping method among College and University students. The design for this study was descriptive using self-administered questionnaires. The data was collected from 1 July to 30 July 2012. 284 students in College and University located in Gyeongsangbuk-do. This data were analyzed by SAS 9.2 program using descriptive statistics, frequency, T-test, ANOVA, and Correlation analysis. The results were as follows. First, there was a difference between male and female in the level of stress, it was statistically significant(p<0.0001). Second, there was a remarkable difference in the level of stress between University and College students(p=0.0001). Third, in the evaluation of correlation, relation between study factor and career factor was statistically significant(0.59, p<0.001). However there was no positive correlation between the five stress-induced factors and problem-based handling way of stress. On the other hand, there was strong positive correlation between the five stress-induced factors and emotional-based coping method of stress(p<0.01).

• Journal of the Korean Society of Food Culture
• /
• v.29 no.1
• /
• pp.101-110
• /
• 2014

This study was performed to determine the optimal composition of a muffin added with jerusalem artichoke powder and oligosaccharide. The experiment was designed based on CCD (central composite design), and evaluation was carried out by means of RSM (response surface methodology), which included 10 experimental points with three replicates each for the two independent variables jerusalem artichoke powder and oligosaccharide. The experimental muffin was prepared according to a traditional recipe, except that the flour was partially replaced by jerusalem artichoke powder (5, 15, or 25%) and the sugar was partially replaced by oligosaccharide (25, 50, or 75%). Using F-test, height, moisture, a-value, b-value, springiness, cohesiveness, texture, and overall acceptability were expressed as a linear model, whereas volume, pH, L-value, appearance, flavor and taste were expressed as a quadratic model. Increased amounts of jerusalem artichoke powder led to reduction of sensory scores for appearance, flavor, taste, texture, and overall quality. The optimum formulation determined by the numerical and graphical methods were similar: jerusalem artichoke powder 10.99%, oligosaccharide 71.40%.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.6
• /
• pp.623-636
• /
• 2014

This study was performed to determine the optimal composition of muffins added with dropwort powder, egg and sugar. The experiment was designed based on BBD (Box-behnken design), and evaluation was carried out by means of RSM (response surface methodology), consisting of 13 experimental points with three replicates each for three independent variables dropwort powder, eggs and sugar. Using F-test, height, moisture, 1,1-diphenyl-2picriylhydrazyl (DPPH) radical scavenging activity, L-value, a-value, springiness, cohesiveness, chewiness, brittleness, color, and appearance acceptability were expressed as a linear model, whereas pH, b-value, flavor, taste, and texture were expressed as a quadratic model. After swallow and overall acceptability were expressed as a 2FI model. As dropwort powder content increased, 1,1-diphenyl-2picriylhydrazyl (DPPH) radical scavenging activity increased. Increasing amounts of dropwort powder led to reduction of sensory scores for color, appearance, flavor, taste, and texture quality. The optimum formulation determined by the numerical and graphical methods were similar: dropwort powder 6 g, egg 77 g, and sugar 60 g.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.102-108
• /
• 2010

Recently, carbon fiber reinforced plastic(CFRP) composite materials have been widely used in various fields of engineering because of its advanced properties. Also, CFRP composite materials offer new design flexibilities, corrosion and wear resistance, low thermal conductivity and increased fatigue life. However CFRP composite materials are susceptible to impact damage due to their lack of through-thickness reinforcement and it causes large drops in the load-carrying capacity of a structure. Therefore, the impact damage behavior and subsequently load-carrying capacity of impacted composite materials deserve careful investigation. In this study, the residual strength and impact characteristics of plain-woven CFRP composites with impact damage are investigated under axial tensile test. By using obtained residual strength and Tan-Cheng failure criterion, residual strength of CFRP laminate with arbitrary fiber angle were evaluated.