• Journal of Korean Society of Steel Construction
• /
• v.13 no.1
• /
• pp.19-28
• /
• 2001

The strength and ductility of steel flexural members are investigated experimentally in this study. As for the performance evaluation of flexural members. experimental studies on the 9 test specimens were carried out. Four specimens were fabricated from SM490 and five specimens were fabricated from SM570. The experimental results of the specimens were analyzed with focus on the flexural strength and ductility. The experimental results exhibited that all the specimens provided sufficient flexural strengthes which exceeded the nominal flexural strengthes specified in the current Limit State Design Specification by average ratio of 1.22. However. the experimental results showed that the compact-section specimens fabricated from SM570 did not provide the required rotational ductility. The yield-to-tensile strength ratio(YR) of SM570 of about 0.9 might be the causes of such insufficient capacities.

• Research in Community and Public Health Nursing
• /
• v.28 no.1
• /
• pp.55-68
• /
• 2017

Purpose: The purpose of this study is to develop and evaluate a joint health self-management program for knee osteoarthritis elders in communities. Methods: This program was developed based on the IMB (information-motivationbehavioral skills) model. The program methods include education, setting and achieving goals, sharing experiences, telephone counseling, and self-monitoring. The topics of the program include joint assessment, exercise, massage, joint protection, medication, depression management, diet, and healthcare approach. The research was conducted following the principles of the nonequivalent control group pretest-posttest design. Participants were 26 subjects in the experimental group, and 27 subjects in the control group. The experimental group participated in the self-management program, and the control group received general education. Results: Both post-test scores of personal motivation, social motivation, behavior skill, self-management behavior, joint pain, joint stiffness, physical function disability, right knee extension, left knee extension, and depression were significantly different between the experimental group and the control group. Conclusion: The results of the study can be used to develop and standardize a systematic joint health self-management program. Further research is highly recommended to develop a strategy to continuously facilitate self-management of osteoarthritis patients' procedures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.306-311
• /
• 1996

This paper persents the flexural behavior of high performance concrete beams having different concrete filling conditions. Three tests were conducted on full-scale beam specimens with design concrete compressive strength of 400 kg/$\textrm{cm}^2$. Different concrete filling conditions were intentionally made such that the first beam specimen was soundly cast to obtain the perfect concrete filling condition. Second beam specimen was cast in such a way that up to the longitudinal tensile reinforcement from the top, good concrete was filled while poor concrete was poured for the bottom part to simulate the poor workamanship, workability and unsatisfactory compaction. Third beam specimens was cast in such a way that up to the neutral axis of the beam section from the top, good concrete was filled while so did for the bottom part as the second beam specimen. The test results were analyzed in terms of load-displacement response, formation of crack, crack width, crack spacing and shift of neutral axis. An evaluation of the ductile response fo three different beam specimens was made in combination with the ultimate load accoding to the three different concrete filling conditions.

• Journal of Hydrogen and New Energy
• /
• v.22 no.4
• /
• pp.520-526
• /
• 2011

In recent years, it is very important that hydrogen storage system is safe for user in any circumstances in case of crash and fire. Because the hydrogen vehicle usually carry high pressurized cylinders, it is necessary to do safety design for fire. The Global Technical Regulation (GTR) has been enacted for localized and engulfing fire test. High pressure hydrogen storage system of fuel cell electrical vehicles are equipped with Thermal Pressure Relief Device (TPRD) installed in pressured tank cylinder to prevent the explosion of the tank during a fire. TPRDs are safety devices that perceive a fire and release gas in the pressure tank cylinder before it is exploded. In this paper, we observed the localized and engulfing behavior of tank safety, regarding the difference of size and types of the tanks in accordance with GTR.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.9-15
• /
• 2005

A bioartificial liver (BAL) is a medical device entrapping living hepatocytes or immortalized cells derived from hepatocytes. Many efforts have already been made to maintain the functions of the hepatocytes in a BAL device over a long term. However, there is still some uncertainty as to their efficacy. and their limitations are unclear. Therefore, it is important to quantitatively evaluate the metabolic functions of a BAL. In previous studies on in vitro BAL devices, two test methods, an initial bolus loading and constant-rate infusion plus initial bolus loading, were theoretically carried out to obtain physiologic data on drugs. However, in the current study, the same two methods were used as a perfusion model and derived the same clearance characterized by an interrelationship between the perfusate flow rate and intrinsic clearance. The interrelationship indicated that the CL increased with an increasing perfusate flow rate and approached its maximum value, i.e. intrinsic clearance. In addition, to set up an in vivo BAL system, the toxic plateau levels in the BAL system were calculated for both series and parallel circuit models. The series model had a lower plateau level than the parellel model. The difference in the toxic plateau levels between the parallel and series models increased with an increasing number of BAL cartridges.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.827-836
• /
• 2004

The design parameter of the heat loss for the pressurized water reactor has been studied. The heat loss from the reactor vessel through the air gap. insulation are analysed by using the computational fluid dynamics code, FLUENT. Parametric study has been performed on the air gap width between the reactor vessel wall and the inner surface of the insulation, and on the insulation thickness. Also evaluated is the performance degradation due to the chimney effect due to gaps left between the panels during the installation of the insulation system. From the analysis results, the optimal with of air gap and insulation thickness and the value of heat loss are obtained The results show how the heat loss varies with the air gap width and insulation thickness. The temperature and the velocity distributions are also presented. From the results of the evaluation. the optimal air gap width and the optimal insulation thickness are obtained. As the difference between the predicted heat loss and measured heat loss from the reactor vessel is construed Primarily as losses due to chimney effect. the contribution of the chimney effect to the total heat loss is quantitatively indicated.

• Wind and Structures
• /
• v.25 no.2
• /
• pp.157-176
• /
• 2017

2-edge box girder bridges have been widely used in civil engineering practice. However, these bridges show weakness in aerodynamic stability. To overcome this weakness, additional attachments, such as fairing and flap, are usually used. These additional attachments can increase the cost and decrease the constructability. Some previous researchers suggested an aerodynamically stabilized 2-edge box girder section, giving a slope to the edge box instead of installing additional attachments. However, their studies are limited to only dynamic stability, even though static aerodynamic coefficients are as important as dynamic stability. In this study, focus was given to the evaluation of static aerodynamic response for a stabilized 2-edge box girder section. For this, the slopes of the edge box were varied from $0^{\circ}$ to $17^{\circ}$ and static coefficients were obtained through a series of wind tunnel tests. The results were then compared with those from computational fluid dynamics (CFD) analysis. From the results, it was found that the drag coefficients generally decreased with the increasing box slope angle, except for the specific box slope range. This range of box slope varied depending on the B/H ratio, and this should be avoided for the practical design of such a bridge, since it results in poor static aerodynamic response.

• Computers and Concrete
• /
• v.21 no.5
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5157-5163
• /
• 2013

The aim of the study was to evaluate of the knowledge, behavior and health beliefs of individuals over 50 regarding colorectal cancer screening, with a descriptive and cross-sectional design at Karabuk Life and Health Center in Turkey. A total of 160 people meeting set criteria were included in the study. The questionnaire consisted of two parts. The first part was composed of questions on characteristics of participants and the second part of questions derived from the Champion's Health Belief Model Scale. Only 15.0% of participants (n=24) had undergone a fecal occult blood test (FOBT), 11.3% (n=18) had had colonoscopy and 4.4% (n=7) had had sigmoidoscopy. Some 90.6% of the participants had low levels of risk awareness about the colorectal cancer. It was found that the average point of severity subscale of participants over 65 is higher than that of participants under 65 (p<0.05). In conclusion, because of the many barriers and health beliefs for the colorectal cancer screening program, the rate of participation in screening programs is not sufficient. Healthcare providers have important responsibilities for increasing rate of attendance in colorectal cancer screening programs.

• Journal of Korean Academy of Nursing
• /
• v.37 no.3
• /
• pp.324-333
• /
• 2007

Purpose: The purpose of this study was to develop and evaluate a quality of life scale for Korean patients with cancer (C-QOL). Methods: The C-QOL was developed and validated as follows, item generation, pilot study, and psychometric tests. A total of 337 patients diagnosed with stomach, liver, lung, colon, breast, or cervix cancer were recruited. The patients were asked to complete the preliminary questionnaire comprising the content-validated items, the SF-36, and the ECOG performance status. The obtained data was analyzed using descriptive statistics, factor analysis, multidimensional scaling (MDS), multitrait/multi-item matrix, ANOVA, t-test, and Cronbach's alpha. Results: Preliminarily twenty-six items were generated through content validity and a pilot study. Factor analysis and MDS extracted a total of 21 items with a 5-point Likert-type scale (C-QOL). The C-QOL included five subscales: physical status (6 items), emotional status (6 items), social function (3 items), concern status (2 items), and coping function (4 items). The C-QOL established content validity, construct validity, item convergent and discriminant validity, known-groups validity, reliability, and sensitivity. Conclusion: The Newly developed C-QOL is an easily applicable instrument which established psychometric properties and reflected Korean culture. It is recommended for further study to examine the responsiveness of the C-QOL using a longitudinal research design.